I.R. Cózar, J.J. Arbeláez-Toro, P. Maimí, F. Otero, E.V. González, A. Turon, P.P. Camanho "A novel methodology to measure the transverse Poisson's ratio in the elastic and plastic regions for composite materials." Composites. Part B, Engineering 272 (2024): -. Cózar I.R.; Otero F.; Maimí P.; González E.V.; Turon A.; Camanho P.P. "An enhanced constitutive model to predict plastic deformation and multiple failure mechanisms in fibre-reinforced polymer composite materials." Composite Structures 330 (2024): -. O. Vallmajó; A. Arteiro; J. M. Guerrero; A.R. Melro; A. Pupurs; A. Turon "Micromechanical analysis of composite materials considering material variability and microvoids." International Journal of Mechanical Sciences 263 (2024): -. G.Guillamet, J.Costa, A.Turon, J.A.Mayugo "In search of the quasi-isotropic laminate with optimal delamination resistance under off-axis loads." Journal of Reinforced Plastics and Composites (2023): -. I. Leciñana; J. Renart; A. Turon; J. Zurbitu; B.H.A.H. Tijs "Characterization and analysis of the mode I interlaminar fatigue behaviour of thermoplastic composites considering R-curve effects." Engineering Fracture Mechanics (2023): -. Abdel-Monsef, S.; Tijs, B.H.A.H.; Renart, J. ; Turon, A. "Accurate simulation of delamination under mixed-mode loading using a multilinear cohesive law." Engineering Fracture Mechanics (2023): -. Sasikumar A; Turon A; Cózar IR; Vallmajó O; Casero JC; De Lozzo M; Abdel-Monsef S. "Sensitivity analysis methodology to identify the critical material properties that affect the open hole strength of composites." Journal of Composite Materials (2023): -. I. Leciñana; J. Zurbitu; J. Renart; A. Turon "A robust fatigue parameter determination method for a local fatigue cohesive zone model." International Journal of Fatigue (2023): -. IR Cózar; F Otero; Pere Maimí; EV González; S Miot; A Turon; PP Camanho "A three-dimensional plastic-damage model for polymer composite materials." Composites. Part A, Applied science and manufacturing 163 (2022): -. Tijs, B.H.A.H.; Abdel-Monsef, S.; Renart, J.; Turon, A.; Bisagni, C. "Characterization and analysis of the interlaminar behavior of thermoplastic composites considering fiber bridging and R-curve effects." Composites. Part A, Applied science and manufacturing 162 (2022): 107101-. S. Abdel-Monsef; J. Renart; L. Carreras; P. Maimí; A. Turon "Environmental effects on the cohesive laws of the composite bonded joints." Composites. Part A, Applied science and manufacturing 155 (2022): 106798-. Breite, C; Melnikov, Arsen; Turon, Albert; de Morais, Alfredo B.; Le Bourlot, Christophe; Maire, Eric; Schöberl, Erich; Otero, Fermin; Mesquita, Francisco; Sinclair, Ian; Costa, Josep; Mayugo, Joan A.; Guerrero, José M.; Gorb "Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites." Composite Structures 279 (2021): -. S Abdel-Monsef; J Renart; L Carreras; A Turon; Pere Maimí "Effect of environment conditioning on mode II fracture behaviour of adhesively bonded joints." Theoretical and Applied Fracture Mechanics 112 (2021): 102912-. J.Llobet; Pere Maimí; A. Turon; B.L.V.Bak; E. Lindgaard; L. Carreras; Y. Essa; F. Martin de la Escalera "A continuum damage model for composite laminates: Part IV- Experimental and numerical tests." Mechanics of Materials 154 (2021): 103686-. C. Breite; A. Melnikov; A. Turon; A.B. de Morais; F. Otero; F. Mesquita; J. Costa; J. A. Mayugo; J.M. Guerrero; L. Gorbatikh; L. N. McCartney; M. Hajikazemi; P. P. Camanho; R. P. Tavares; S. V. Lomov; S. Pimenta; W. Van Paepe "Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites." Composites Science and Technology 202 (2020): -. S. Abdel-Monsef; J. Renart; L. Carreras; Pere Maimí; A. Turon "Effect of environmental conditioning on pure mode I fracture behaviour of adhesively bonded joints." Theoretical and Applied Fracture Mechanics 110 (2020): 102826-. Jose M. Guerrero; Joan A. Mayugo; Josep Costa; Albert Turon "Size effects in hybrid unidirectional polymer composites under longitudinal tension: A micromechanical investigation." Composites. Part A, Applied science and manufacturing 140 (2020): -. I.R. Cózar; A. Turon; E.V. González; O. Vallmajó; A. Sasikumar "A methodology to obtain material design allowables from high-fidelity compression after impact simulations on composite laminates." Composites. Part A, Applied science and manufacturing 139 (2020): -. J. Manterola; J. Zurbitu; J. Renart; A. Turon; I. Urresti "Durability study of flexible bonded joints: The effect of sustained loads in mode I fracture tests." Polymer Testing 88 (2020): -. J.Manterola; J.Renart; J.Zurbitu; A.Turon; I.Urresti "Mode I fracture characterisation of rigid and flexible bonded joints using an advanced Wedge-Driven Test." Mechanics of Materials 148 (2020): -. A.Sasikumar; J.Costa; D.Trias; J.Llobet; I.R.Cózar; A.Turon; P.Linde "A virtual testing based search for optimum compression after impact strength in thin laminates using ply-thickness hybridization and unsymmetrical designs." Composites Science and Technology 196 (2020): -. S. Abdel Monsef; M. Pérez-Galmés; J. Renart; A. Turon; P. Maimí "The influence of mode II test configuration on the cohesive law of bonded joints." Composite Structures 234 (2020): 111689-. Jose M.Guerrero; Joan A. Mayugo; Josep Costa; Albert Turon "Failure of hybrid composites under longitudinal tension: influence of dynamic effects and thermal residual stresses." Composite Structures 233 (2020): -. S. Abdel Monsef; A. Ortega; A. Turon; P. Maimí; J. Renart "An efficient method to extract a mode I cohesive law for bonded joints using the double cantilever beam test." Composites. Part B, Engineering 178 (2019): 107424-. J. Manterola; M. Aguirre; J. Zurbitu; J. Renart; A. Turon; I. Urresti "Using acoustic emissions (AE) to monitor mode I crack growth in bonded joints." Engineering Fracture Mechanics (2019): -. J. Manterola; M. Cabello; J. Zurbitu; J. Renart; A. Turon; J. Jumel; I. Urresti "Effect of the width-to-thickness ratio on the mode I fracture toughness of flexible bonded joints." Engineering Fracture Mechanics (2019): -. Adrià Quintanas-Corominas; José Reinoso; Eva Casoni; Albert Turon; Joan Andreu Mayugo "A phase field approach to simulate intralaminar and translaminar fracture in long fiber composite materials." Composite Structures 220 (2019): 899-911. L.Carreras; A.Turon; B.L.V.Bak; E.Lindgaard; J.Renart; F.Martin de la Escalera "A simulation method for fatigue-driven delamination in layered structures involving non-negligible fracture process zones and arbitrarily shaped crack fronts." Composites. Part A, Applied science and manufacturing 122 (2019): 107-119. Rodrigo P Tavares; Fermin Otero; Joan Baiges; Albert Turon; Pedro P Camanho "A dynamic spring element model for the prediction of longitudinal failure of polymer composites." Computational Materials Science (2019): -. Vallmajó, O.; Cózar, I.R.; Furtado, C; Tavares, R.; Arteiro, A.; Turon, A.; Camanho, P.P. "Virtual calculation of the B-value allowables of notched composite laminates." Composite Structures 212 (2019): 11-21. A.Cameselle-Molares; A.P.Vassilopoulos; J.Renart; A.Turon; T.Keller "Numerically-based method for fracture characterization of Mode I-dominated two-dimensional delamination in FRP laminates." Composite Structures 2014 (2019): 143-152. A.Wagih; P.Maimí; N.Blanco; S.M.García-Rodríguez; G.Guillamet; R.P.Issac; A.Turon; J.Costa "Improving damage resistance and load capacity of thin-ply laminates using ply clustering and small mismatch angles." Composites. Part A, Applied science and manufacturing 117 (2019): 76-91. L. Carreras; J. Renart; A. Turon; J. Costa; B. L. V. Bak; E. Lindgaard; F. Martin de la Escalera; Y. Essa "A benchmark test for validating 3D simulation methods for delamination growth under quasi-static and fatigue loading." Composite Structures 210 (2019): 932-941. Jose M. Guerrero; Rodrigo P. Tavares; Fermin Otero; Joan A. Mayugo; Josep Costa; Albert Turon; Pedro P. Camanho "An analytical model to predict stress fields around broken fibres and their effect on the longitudinal failure of hybrid composites." Composite Structures 211 (2018): 564-576. Adrià Quintanas-Corominas; Pere Maimí; Eva Casoni; Albert Turon; Joan Andreu Mayugo; Gerard Guillamet; Mariano Vázquez "A 3D transversally isotropic constitutive model for advanced composites implemented in a high performance computing code." European Journal of Mechanics A-Solids 71 (2018): 278-291. Rodrigo P. Tavares; Jose M. Guerrero; Fermin Otero; Albert Turon; Joan A. Mayugo; Josep Costa; Pedro P. Camanho "Effects of local stress fields around broken fibres on the longitudinal failure of composite materials." International Journal of Solids and Structures 156-157 (2018): 294-305. A.Cameselle-Molares; A.P.Vassilopoulos; J.Renart; A.Turon; T.Keller "Numerical simulation of two-dimensional in-plane crack propagation in FRP laminates." Composite Structures 200 (2018): 396-407. L. Carreras; B.L.V. Bak; A. Turon; J. Renart; E. Lindgaard "Point-wise evaluation of the growth driving direction for arbitrarily shaped delamination fronts using cohesive elements." European Journal of Mechanics A-Solids 72 (2018): 464-482. I. Jaeck; L. Carreras; J. Renart; A. Turon; F. Martin de la Escalera; Y. Essa "Experimental methodology for obtaining fatigue crack growth rate curves in mixed-mode I-II by means of variable cyclic displacement tests." International Journal of Fatigue 110 (2018): 63-70. L.Carreras; E.Lindgaard; J.Renart; B.L.V.Bak; A.Turon "An evaluation of mode-decomposed energy release rates forarbitrarily shaped delamination fronts using cohesive elements." Computer Methods in Applied Mechanics and Engineering 347 (2018): 218-237. Jose Manuel Guerrero; Joan Andreu Mayugo; Josep Costa; Albert Turon "A 3D Progressive Failure Model for predicting pseudo-ductility in hybrid unidirectional composite materials under fibre tensile loading." Composites. Part A, Applied science and manufacturing 107 (2018): 579-591. Turon, A.; González, E.V.; Sarrado, C.; Guillamet, G.; Maimí, P. "Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness." Composite Structures 184 (2018): 506-511. J.D.Vanegas-Jaramillo, A.Turon, J.Costa, L.J.Cruz, J.A.Mayugo "Analytical model for predicting the tensile strength of unidirectional composites based on the density of fiber breaks." Composites. Part B, Engineering 141 (2017): 84-91. Rodrigo P Tavares; Fermin Otero; Albert Turon; Pedro P Camanho "Effective Simulation of the Mechanics of Longitudinal Tensile Failure of Unidirectional Polymer Composites." International Journal of Fracture (2017): -. Carreras, L.; Renart, J.; Turon, A.; Costa, J.; Essa, Y.; Martin de la Escalera, F. "An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading." International Journal of Fatigue 95 (2017): 185-193. Sarrado, C.; Leone, F.A.; Turon, A. "Finite-thickness cohesive elements for modeling thick adhesives." Engineering Fracture Mechanics 168 (2016): 105-113. Guillamet, G.; Turon, A.; Costa, J.; Linde, P. "A quick procedure to predict free-edge delamination in thin-ply laminates under tension." Engineering Fracture Mechanics 168 (2016): 28-39. Sarrado, C.; Turon, A.; Costa, J.; Renart, J. "An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws." Composites. Part A, Applied science and manufacturing 90 (2016): 234-242. Soto, A.; González, E.V.; Maimí, P.; Turon, A.; Sainz de Aja, J.R.; de la Escalera, F.M. "Cohesive zone length of orthotropic materials undergoing delamination." Engineering Fracture Mechanics 159 (2016): 174-188. Brian L.V. Bak; Albert Turon; Esben Lindgaard; Erik Lund "A simulation method for high-cycle fatigue-driven delamination using a cohesive zone model." International Journal for Numerical Methods in Engineering 106 (2016): 163-191. Sarrado, C.; Turon, A.; Costa, J.; Renart, J. "On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints." International Journal of Solids and Structures 81 (2016): 110-116. Rodrigo P Tavares; António R Melro; Miguel A Bessa; Albert Turon; Wing K Liu; Pedro P Camanho "Mechanics of Hybrid Polymer Composites: Analytical and Computational study." Computational Mechanics (2016): -. Baena, M.; Torres, L.; Turon, A.; Llorens, M.; Barris, C "Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars." Construction and Building Materials 106 (2016): 449-460. Cabello Ulloa, Mario; Zurbitu Gonzalez, Javier; Renart Canalia, Jordi; Turon Blasco, Albert; Martínez, Félix "A General analytical model based on elastic foundation beam theory for adhesively bonded DCB joints either with flexible or rigid adhesives." International Journal of Solids and Structures 94-95 (2016): 21-34. Sarrado Molina, Carlos; Turon Travesa, Albert; Renart Canalias, Jordi; Costa i Balanzat, Josep "An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach." Composites Science and Technology 117 (2015): 85-91. L. Zubillaga; A. Turon; J. Renart; J. Costa; P. Linde "An experimental study on matrix crack induced delamination in composite laminates." Composite Structures 127 (2015): 10-17. C. Miàs, L. Torres, M. Guadagnini, A. Turon "Short and long-term cracking behaviour of GFRP reinforced concrete beams." Composites. Part B, Engineering 77 (2015): 223-231. Cabello, M.; Zurbitu, J.; Renart, J.; Turon, A.; Martínez, F. "A Non-linear hyperelastic foundation beam theory model for double cantilever beam tests with thick flexible adhesive." International Journal of Solids and Structures 80 (2015): 19-27. Brian L. V. Bak, Carlos Sarrado, Albert Turon and Josep Costa "Delamination Under Fatigue Loads in Composite Laminates: A Review on the Observed Phenomenology and Computational Methods." Applied Mechanics Reviews 66 (2014): 060803-. G. Guillamet; A. Turon; J. Costa; J. Renart; P. Linde; J.A. Mayugo "Damage occurrence at edges of Non-crimp-fabric thin-ply laminates under off-axis uniaxial loading." Composites Science and Technology 98 (2014): 44-50. L. Zubillaga; N. Carrere; A. Turon; G. Guillamet; P. Linde "Experimental and numerical analysis of free-edge delamination by means of a two-fold criterion and a cohesive zone model." Composites. Part A, Applied science and manufacturing (2014): -. L. Zubillaga; A. Turon; P. Maimí; J. Costa; S. Mahdi; P. Linde "An enenrgy based failure criterion for matrix crack induced delamination in laminated composite structures.." Composite Structures 112 (2014): 339-344. Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Turon, A.; Costa, J. "Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior." Composites. Part B, Engineering 56 (2014): 660-669. Miàs Oller, C; Torres, L.; Turon, A.; Barris Peña, C. "Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams." Composite Structures 96 (2013): 279-285. Baena, M.; Torres, Ll.; Turon, A.; Miàs, C. "Analysis of cracking behaviour of tension stiffening in FRP reinforced concrete tensile elements." Composites. Part B, Engineering 45 (2013): 1360-1367. Miàs, C.; Torres, Ll.; Turon, A.; Sharaky,I.A. "Effect of Material Properties on Long-term Deflections of GFRP Reinforced Concrete Beams." Construction and Building Materials 41 (2013): 99-108. Sarrado, C.; Turon, A.; Renart, J.; Urresti, I. "Assessment of energy dissipation during mixed-mode delamination growth using cohesive zone models." Composites. Part A, Applied science and manufacturing (2012): 2128-2136. Torres, Ll.; Miàs, C.; Turon, A.; Baena, M. "A rational method to predict long-term deflections of FRP reinforced concrete members." Engineering Structures 40 (2012): 230-239. Camanho, P.P; Arteiro, A.; Turon, A.; Costa, J.; Guillamet, G.; González, E.V. "Structural integrity of thin-ply laminates." JEC Composites Magazine 49 (2012): 91-92. González, Emilio V.; Maimí, P.; Camanho, P.P.; Turon, A.; Mayugo, J.A. "Simulation of drop-weight impact and compression after impact tests on composite laminates." Composite Structures 94 (2012): 3364-3378. Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C. "Erratum to ' Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members' [Compos Struct 93 (2011) 2511-2520]." Composite Structures 94 (2011): 312-312. Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination." Mechanics of Materials 43 (2011): 169-185. Maimí, P.; Turon, A.; Trias, D. "Crack propagation in quasi-brittle two-dimensional isotropic lattices." Engineering Fracture Mechanics 78 (2011): 60-70. Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part II: Evolution of crack density and delamination." Mechanics of Materials 43 (2011): 194-211. Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C. "Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members." Composite Structures 93 (2011): 2511-2520. Miàs Oller, C.; Torres, Ll.; Turon, A.; Baena Muñoz, M.; Barris Peña, C. "A Simplified method to obtain time-dependent curvatures and deflections of concrete members reinforced with FRP bars." Composite Structures 92 (2010): 1833-1838. Turon, A.; Camanho, P.P.; Costa, J.; Renart, J. "Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness." Composite Structures 92 (2010): 1857-1864. Torres, Ll.; Miàs Oller, C.; Barris Peña, C.; Baena Muñoz, M. "Flechas diferidas en vigas de hormigón con barras de materiales compuestos." Cemento Hormigón 81 (2010): 36-41. Baena Muñoz, M.; Torres, Ll.; Turon, A.; Barris Peña, C. "Experimental study of bond behaviour between concrete and FRP bars using a pull-out test." Composites. Part B, Engineering 40 (2009): 784-797. Barris Peña, C.; Torres, Ll.; Turon, A.; Baena Muñoz, M.; Catalan, A. "An experimental study of the flexural behaviour of GFRP RC beams and comparison with prediction models." Composite Structures 91 (2009): 286-295. Gonzalez, Emilio V.; Maimí, P.; Turon, A.; Camanho, P.P.; Renart, J. "Simulation of delamination by means of cohesive elements using an explicit finite element code." Cmc-Computers Materials & Continua 9 (2009): 51-92. Baena Muñoz, M.; Torres, Ll.; Turon, A.; Barris Peña, C. "Estudio de la adherencia entre armaduras de materiales compuestos de matríz polimérica (FRP) y hormigón." Hormigón y Acero 59 (2008): 67-75. Dávila, C.G.; Camanho, P.P.; Turon, A. "Effective simulation of delamination in aeronautical structures using shells and cohesive elements." Journal of Aircraft 45 (2008): 663-672. Turon, A.; Dávila, C.G.; Camanho, P.P.; Costa, J. "An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models." Engineering Fracture Mechanics 74 (2007): 1665-1682. Davila, C.G.; Camanho, P.P.; Turon, A. "Cohesive elements for shells." NASA/TM 214869 (2007): 1-22. Turon, A.; Costa, J.; Camanho, P.P.; Davila, C.G. "Simulation of delamination propagation in composites under high-cycle fatigue by means of cohesive-zone models." NASA/TM 214532 (2006): 1-28. Blanco, N.; Turon, A.; Costa, J. "An exact solution for the determination of the mode mixture in the mixed-mode bending delamination test.." Composites Science and Technology 66 (2006): 1256-1258. Trias, D.; Costa, J.; Turon, A.; Hurtado, J.E. "Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers." Acta Materialia 54 (2006): 3471-3484. Turon, A.; Costa, J.; Camanho, P.P.; Dávila, C.G. "Simulation of delamination in composites under high-cycle fatigue loading." Composites. Part A, Applied science and manufacturing 38 (2006): 2270-2282. Turon, A.; Camanho, P.P.; Costa, J.; Dávila, C.G. "A damage model for the simulation of delamination in advanced composites under variable-mode loading." Mechanics of Materials 38 (2006): 1072-1089. Turon, A.; Davila, C.G.; Camanho, P.P.; Costa, J. "An engineering solution for using coarse meshes in the simulation of delamination with cohesive zone models." NASA/TM 213547 (2005): 1-21. Costa, J.; Turon, A.; Trias, D.; Blanco, N.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue." Composites Science and Technology 65 (2005): 2269-2275. Turon, A.; Costa, J.; Maimí, P.; Trias, D.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation." Composites Science and Technology 65 (2005): 2039-2048. Turon, A.; Camanho, P.P.; Costa, J.; Davila, C.G. "An interface damage model for the simulation of delamination under variable-mode ratio in composite materials." NASA/TM (2004): 1-32.
C. Breite; A. Melnikov; A. Turon; A.B. de Morais; C. Le Bourlot; E. Maire; E. Schöberl; F. Otero; F. Mesquita; I. Sinclair; J. Costa; J.A. Mayugo; J.M. Guerrero; L. Gorbatikh; L.N. McCartney; M. Hajikazemi; M. Mehdikhani; M.N "A synchrotron computed tomography dataset for validation of longitudinal tensile failure models based on fibre break and cluster development." Data in Brief 39 (2021): -.
M. Cabello; A. Turon; J. Zurbitu; J. Renart; C. Sarrado; F. Martínez "Progressive failure analysis of DCB bonded joints using a new elastic foundation coupled with a cohesive damage model." International Journal of Plasticity (2016): -.