Department of Mechanical Engineering and Industrial Construction > Publications > Publications in Magazines
Go to content (click on Intro)
UdG Home UdG Home
Close
Menu
Machine translation, text awaiting revision

Department of Mechanical Engineering and Industrial Construction

Publications in magazines

Department of Mechanical Engineering and Industrial Construction

AMADE, Anàlisi i Materials avançats per al Disseny Estructural

Publicacions en revistes

Abstract
  • Ripoll, L.; Pérez Aparicio, J.L. "Optimización de Tensiones en Volantes Unicapa Mediante Pretensado Térmico." Materiales compuestos (2004).
  • Ripoll, L.; Pérez Aparicio, J.L. "Tensiones residuales en cilindros de materiales compuestos curados a temperatura no uniforme ." Materiales compuestos (2004).
Article
  • Azevedo, C.D.R.,  Ripoll, L. "Microscopic simulation of xenon-based optical TPCs in the presence of molecular additives." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 877 (2018): 157-172.
  • Palma, R., Torrent, J., Pérez-Aparicio, J.L., Ripoll, L. "Reliability-based dynamical design of a singular structure for high energy physics experiment." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 18 (2018): 256-266.
  • Adrián Ortega; Pere Maimí, Emilio V. González: Daniel Trias. "Specimen geometry and specimen size dependence of the R-curve and the size effect law from a cohesive model point of view." International Journal of Fracture 205 (2017): 239-254.
  • Adrián Ortega; Pere Maimí; Emilio V. González; José Ramon Sainz de Aja; Federico M. de la Escalera; Pablo Cruz "Translaminar fracture toughness of interply hybrid laminates under tensile and compressive loads." Composites Science and Technology 143 (2017): 1-12.
  • Barris, C.; Torres, L.; Vilanova, C.; Miàs, C.; Llorens, M. "Experimental study on crack width and crack spacing for Glass-FRP reinforced concrete beams." Engineering Structures 131 (2017): 231-242.
  • Carreras, L.; Renart, J.; Turon, A.; Costa, J.; Essa, Y.; Martin de la Escalera, F. "An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading." International Journal of Fatigue 95 (2017): 185-193.
  • Emara, M.; Torres, L.; Baena, M.; Barris, C.; Moawad, M. "Effect of sustained loading and environmental conditions on the creep behavior of an epoxy adhesive for concrete structures strengthened with CFRP laminates." Composites. Part B, Engineering 129 (2017): 88-96.
  • Falcó Salcines, Olben; Lopes, Cláudio Saúl; Naya, F.; Sket, F.; Maimí Vert, Pere; Mayugo Majó, Joan Andreu "Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites." Composites. Part A, Applied science and manufacturing 93 (2017): 53-71.
  • Gribniak, V.; Rimkus, A.; Torres, L.; Jakstaite, R "Deformation analysis of reinforced concrete ties: Representative geometry." Structural Concrete 18 (2017): 634-647.
  • Renner, J.; Ripoll, L.; et al. "Background rejection in NEXT using deep neural networks." Journal of Instrumentation 12 (2017): T01004-.
  • Taïra, Fadila; Carreras, Laura; Camps, Jaume; Farjas, Jordi; Roura, Pere; Calleja, Albert; Puig, Teresa; Obradors, Xavier "Melting temperature of YBa2Cu3O7−x and GdBa2Cu3O7−x at subatmospheric partial pressure." Journal of Alloys and Compounds 692 (2017): 787-792.
  • Yi Liv, G. Guillamet, J. Costa, E.V. González, L. Marín, J.A. Mayugo "Experimental study into compression after impact strength of laminates with conventional and nonconventional ply orientations." Composites. Part B, Engineering 126 (2017): 133-142.
  • A. Wagih "Effect of Mg addition on mechanical and thermoelectrical properties of Al−Al2O3 nanocomposite." Transactions of Nonferrous Metals Society of China (2016): -.
  • A. Wagih "Synthesis of Nanocrystalline Al2O3 Reinforced Al Nanocomposites by High-Energy Mechanical Alloying: Microstructural Evolution and Mechanical Properties." Transactions of the Indian Institute of Metals (2016): -.
  • A. Wagih, A. Fathy "Experimental investigation and FE simulation of nano-indentation on Al-Al2O3 nanocomposites." Advanced Powder Technology (2016): -.
  • A. Wagih, A. Fathy, T.A. Sebaey "Experimental investigation on the compressibility of Al/Al2O3 nanocomposites." International Journal of Materials & Product Technology (2016): -.
  • Adrián Ortega; Pere Maimí; Emilio Vicente González; Daniel Trias; "Characterization of the translaminar fracture cohesive law." Composites. Part A, Applied science and manufacturing 91 (2016): 501-509.
  • Baena, M.; Torres, L.; Turon, A.; Llorens, M.; Barris, C "Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars." Construction and Building Materials 106 (2016): 449-460.
  • Barris, C.; Torres,L.; Simon, E. "Learning based on the project entitled 'Design and construction of a wooden bridge'." Journal of Technology and Science Education 62 (2016): 135-143.
  • Cabello Ulloa, Mario; Zurbitu Gonzalez, Javier; Renart Canalia, Jordi; Turon Blasco, Albert; Martínez, Félix "A General analytical model based on elastic foundation beam theory for adhesively bonded DCB joints either with flexible or rigid adhesives." International Journal of Solids and Structures 94-95 (2016): 21-34.
  • Dafni, T.; Ripoll L.; et al. "Results of the material screening program of the NEXT experiment." Nuclear and Particle Physics Proceedings 273-275 (2016): 2666-2668.
  • El-Nemr A.; Ahmed EA; Barris C; Benmokrane B "Bond-dependent coefficient of glass- and carbon-FRP bars in normal and high-strength concretes." Construction and Building Materials (2016): 77-89.
  • Ferrario, P.; Laing, A.; López-March, N.; Gómez-Cadenas, J. J.; Álvarez, V.; Azevedo, C. D R; Borges, F. I G; Cárcel, S.; Cebrián, S.; Cervera, A.; Conde, C. A N; Dafni, T.; Díaz, J.; Diesburg, M.; Esteve, R.; Fernandes, L. M "First proof of topological signature in the high pressure xenon gas TPC with electroluminescence amplification for the NEXT experiment." Journal of High Energy Physics January 2016 (2016): -.
  • Guillamet, G.; Turon, A.; Costa, J.; Linde, P. "A quick procedure to predict free-edge delamination in thin-ply laminates under tension." Engineering Fracture Mechanics (2016): -.
  • Marín, L.; González, E.V.; Maimí, P.; Trias, D.; Camanho, P.P. "Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms." Composites Science and Technology 122 (2016): 130-139.
  • Martín Albo, J.; Muñoz Vidal, J.; Ferrario, P.; Nebot Guinot, M.; Gómez Cadenas, J.J.; Álvarez, V.; Azevedo, C. D.R.; Borges, F. I.G.; Cárcel, S.; Carrión, J. v.; Cebrián, S.; Cervera, A.; Conde, C. A.N.; Díaz, J.; Diesburg, "Sensitivity of NEXT-100 to neutrinoless double beta decay." Journal of High Energy Physics May 2016 (2016): -.
  • Pérez-Galmés, M.; Renart, J.; Sarrado, C.; Rodríguez-Bellido, A.; Costa, J. "A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test." Composites. Part A, Applied science and manufacturing 90 (2016): 670-677.
  • Renart, J.; Vicens, J.; Budhe, S.; Rodríguez-Bellido, A.; Comas, J.; Mayugo, J.A.; Costa, J. "An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen's compliance." International Journal of Fatigue 82 (2016): 634-642.
  • Sarrado, C.; Leone, F.A.; Turon, A. "Finite-thickness cohesive elements for modeling thick adhesives." Engineering Fracture Mechanics (2016): -.
  • Sarrado, C.; Turon, A.; Costa, J.; Renart, J. "An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws." Composites. Part A, Applied science and manufacturing 90 (2016): 234-242.
  • Sarrado, C.; Turon, A.; Costa, J.; Renart, J. "On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints." International Journal of Solids and Structures 81 (2016): 110-116.
  • Soto, A.; González, E.V.; Maimí, P.; Turon, A.; Sainz de Aja, J.R.; de la Escalera, F.M. "Cohesive zone length of orthotropic materials undergoing delamination." Engineering Fracture Mechanics 159 (2016): 174-188.
  • Torres, L.; Sharaky, I.A.; Barris, C.; Baena, M. "Experimental study of the influence of adhesive properties and bond length on the bond behaviour of NSM FRP bars in concrete." Journal of Civil Engineering and Management 22 (2016): 808-817.
  • Trias Mansilla, Daniel; Maimí Vert, Pere; Blanco Villaverde, Norbert "Maximization of the fundamental frequency of plates and cylinders." Composite Structures 156 (2016): 375-384.
  • Vilanova, I.; Torres, L.; Baena, M.; Llorens, M. "Numerical simulation of bond-slip interface and tension stiffening in GFRP RC tensile elements." Composite Structures 153 (2016): 504-513.
  • Wagih, A.; Maimí Vert, Pere; Blanco Villaverde, Norbert; Trias Mansilla, Daniel "Predictive model for the spherical indentation of composite laminates with finite thickness." Composite Structures 153 (2016): 468-477.
  • Wagih, A.; Maimí, P.; Blanco, N.; Costa, J. "A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates." Composites. Part A, Applied science and manufacturing 82 (2016): 180-189.
  • Wagih, A.; Maimí, P.; González, E.V.; Blanco, N.; Sainz de Aja, J.R.; de la Escalera, F.M.; Olsson, R.; Alvarez, E. "Damage sequence in thin-ply composite laminates under out-of-plane loading." Composites. Part A, Applied science and manufacturing 87 (2016): 66-77.
  • A. Wagih "Mechanical properties of Al-Mg/Al2O3 nanocomposite powder produced by mechanical alloying." Advanced Powder Technology (2015): -.
  • Badalló, P.; Trias, D.; Lindgaard, E. "Damage tolerance optimization of composite stringer run-out under tensile load." Composite Structures 133 (2015): 98-104.
  • Brian L.V. Bak; Albert Turon; Esben Lindgaard; Erik Lund "A simulation method for high-cycle fatigue-driven delamination using a cohesive zone model." International Journal for Numerical Methods in Engineering (2015): -.
  • C. Miàs, L. Torres, M. Guadagnini, A. Turon "Short and long-term cracking behaviour of GFRP reinforced concrete beams." Composites. Part B, Engineering 77 (2015): 223-231.
  • Cabello, M.; Zurbitu, J.; Renart, J.; Turon, A.; Martínez, F. "A Non-linear hyperelastic foundation beam theory model for double cantilever beam tests with thick flexible adhesive." International Journal of Solids and Structures 80 (2015): 19-27.
  • Cao Nguyen, T.; Pansuk, W.; Torres, L. "Flexural behavior of fire-damaged reinforced concrete slabs repaired with near-surface mounted (NSM) carbon fiber reinforced polymer (CFRP) rods." Journal Of Advanced Concrete Technology 13 (2015): 15-29.
  • Cebrián, S.; Ripoll, L. [et al.] "Radiopurity assessment of the tracking readout for the NEXT double beta decay experiment." Journal of Instrumentation May 2015 (2015): -.
  • D. Piedrafita; X. Cahis; E. Simon; J. Comas "A new Perforated core buckling restrained brace." Engineering Structures 85 (2015): 118-126.
  • Ferreira, D.; Oller, E.; Barris, C.; Torres, L. "Shear strain influence in the service response of FRP reinforced concrete beams." Composite Structures 121 (2015): 142-153.
  • Freitas, E.D.C.; Fernandes, L.M.P.; Yahlali, N.; Pérez, J.; Álvarez, V.; Borges, F.I.G.; Camargo, M; Cárcel, S.; Cebrián, S.; Cervera, A.; Conde, C.A.N.; Dafni,T.; Díaz,J.; Esteve,R.; Ferrario, P.; Ferreira,A.L.; Gehman,V.M.; "PMT calibration of a scintillation detector using primary scintillation." Journal of Instrumentation 10 (2015): -.
  • González-Díaz, D., ... Ripoll L. "Accurate γ and MeV-electron track reconstruction with an ultra-low diffusion Xenon/TMA TPC at 10 atm." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 804 (2015): 8-24.
  • Isart Valle, Nativitat; El Said, B.; Ivanov, D.S.; Hallett, S.R.; Mayugo Majó, Joan Andreu; Blanco Villaverde, Norbert "Internal geometric modelling of 3D woven composites: A comparison between different approaches." Composite Structures 132 (2015): 1219-1230.
  • Kabeel, AM; Maimí, P; González, EV; Gascons, N "Net-tension strength of double-lap joints under bearing-bypass loading conditions using the cohesive zone model ." Composite Structures 119 (2015): 443-451.
  • L. Zubillaga; A. Turon; J. Renart; J. Costa; P. Linde "An experimental study on matrix crack induced delamination in composite laminates." Composite Structures 127 (2015): 10-17.
  • Miquel F. Llop, Narcis Gascons, Francesc X. Llauró "Recurrence plots to characterize gas–solid fluidization regimes." International Journal of Multiphase Flow 73 (2015): 43-56.
  • N. Isart;J.A. Mayugo;N. Blanco;L. Ripoll;A. Sola;M. Soler "Geometric model for 3D through-thickness orthogonal interlock composites." Composite Structures 119 (2015): 787-798.
  • Piedrafita, D.; Maimí, P.; Cahís, X. "A constitutive model for a novel modular all-steel buckling restrained brace ." Engineering Structures 100 (2015): 118-126.
  • Renner, J.; Ripoll L.[et al.] "Ionization and scintillation of nuclear recoils in gaseous xenon." Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment September 2015 (2015): 62-74.
  • Roura, P. ;Farjas, J.; Eloussifi, H; Carreras, L.; Ricart, S.; Puig, T.; Obradors, X. "Thermal analysis of metal organic precursors for functional oxide preparation: Thin films versus powders." Thermochimica Acta 601 (2015): 1-8.
  • Sarrado Molina, Carlos; Turon Travesa, Albert; Renart Canalias, Jordi; Costa i Balanzat, Josep "An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach." Composites Science and Technology 117 (2015): 85-91.
  • Serra L; ...Ripoll L "An improved measurement of electron-ion recombination in high-pressure xenon gas." Journal of Instrumentation 10 (2015): -.
  • Sharaky, I.A.; Torres, L.; Salam, H.E.M. "Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips." Composite Structures 122 (2015): 113-126.
  • Torres, Ll; Barris, C; Kaklauskas, G; Gribniak, V. "Modelling of tension-stiffening in bending RC elements based on equivalent stiffness of the rebar." Structural Engineering and Mechanics 53 (2015): 997-1016.
  • Vilanova, I; Baena, M.; Torres, L.; Barris, C. "Experimental study of bond-slip of GFRP bars in concrete under sustained loads." Composites. Part B, Engineering 74 (2015): 42-52.
  • Brian L. V. Bak, Carlos Sarrado, Albert Turon and Josep Costa "Delamination Under Fatigue Loads in Composite Laminates: A Review on the Observed Phenomenology and Computational Methods." Applied Mechanics Reviews 66 (2014): 060803-.
  • A. Fathy, A. Wagih, M. Abd El-Hamid, A. A. Hassan "Effect of Mechanical Milling on the Morphology and Structural Evaluation of Al- Al2O3 Nanocomposite Powders." Composite Structures (2014): -.
  • A. Fathy, A. Wagih, M. Abd El-Hamid, Ahmed A. Hassan "The effect of Mg add on morphology and mechanical properties of Al-xMg/10Al2O3 nanocomposite produced by mechanical alloying." Advanced Powder Technology (2014): -.
  • A. Ortega; P. Maimí; E.V. González; Ll. Ripoll. "Compact tension specimen for orthotropic materials." Composites. Part A, Applied science and manufacturing 63 (2014): 85-.
  • Álvarez, V.; Ripoll, L.[et al.] "Description and commissioning of NEXT-MM prototype: first results from operation in a Xenon-Trimethylamine gas mixture." Journal of Instrumentation March 2014 (2014): -.
  • D Lorca; L. Ripoll [et al.] "Characterisation of NEXT-DEMO using xenon Kα X-rays." Journal of Instrumentation October 2014 (2014): -.
  • Falco, O.; Lopes, C.S.; Mayugo, J.A. ; Gascons, N.; Renart, J. "Effect of tow-drop gaps on the damage resistance and tolerance of Variable-Stiffness Panels." Composite Structures 116 (2014): 94-103.
  • Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Costa, J. "Variable-stiffness composite panels: Defect tolerance under in-plane tensile loading." Composites. Part A, Applied science and manufacturing 63 (2014): 21-31.
  • Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Turon, A.; Costa, J. "Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior ." Composites. Part B, Engineering 56 (2014): 660-669.
  • G. Guillamet; A. Turon; J. Costa; J. Renart; P. Linde; J.A. Mayugo "Damage occurrence at edges of Non-crimp-fabric thin-ply laminates under off-axis uniaxial loading." Composites Science and Technology 98 (2014): 44-50.
  • Garcia, R.; Hajirasouliha, I.; Guadagnini, M.; Helal, Y.; Jemaa, Y.; Pilakoutas, K.; Mongabure, P.; Chrysostomou, C.; Kyriakides, N.; Ilkid, A.; Budescu, M.; Taranu, N.; Ciupala, M.A.; Torres, L.; Saiidi, M. "Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps. ." Journal of Earthquake Engineering 18 (2014): 187-213.
  • Gómez Cadenas, J.J.; Ripoll, L. [et al.] "Present status and future perspectives of the NEXT experiment ." Advances In High Energy Physics 2014 (2014): -.
  • González, EV; Maimí, P; Sainz de Aja, JR; Cruz,P; Camanho PP "Effects of interply hybridization on the damage resistance and tolerance of composite laminates." Composite Structures 108 (2014): 319-331.
  • Guillamet, G., Liv, Y., Turon, A., Marín, L., González, E.V., Mayugo, J.A., Costa, J. "Design of non-conventional CFRP laminates for improved damage resistance and damage tolerance." 16th European Conference on Composite Materials, ECCM 2014 (2014): -.
  • Kabeel, AM; Maimí, P; Gascons, N; González, EV "Net-tension strength of double lap joints taking into account the material cohesive law." Composite Structures 112 (2014): 207-213.
  • L. Zubillaga; A. Turon; P. Maimí; J. Costa; S. Mahdi; P. Linde "An energy based failure criterion for matrix crack induced delamination in laminated composite structures.." Composite Structures 112 (2014): 339-344.
  • Maimí, P; González, E.V.; Camanho, P.P. "Comment to the paper ‘Analysis of Progressive Matrix Cracking in Composite Laminates II. First Ply Failure’ by George J Dvorak and Norman Laws." Journal of Composite Materials 48 (2014): 1139-1141.
  • Martín-Santos, E; Maimí, P; González, EV; Cruz,P "A continuum constitutive model for the simulation of fabric-reinforced composites." Composite Structures 111 (2014): 122-129.
  • N. Blanco; D. Trias; S.T. Pinho; P. Robinson "Intralaminar fracture toughness characterisation of woven composite laminates. Part I: Design and analysis of a compact tension (CT) specimen." Engineering Fracture Mechanics 131 (2014): 349-370.
  • N. Blanco; D. Trias; S.T. Pinho; P. Robinson "Intralaminar fracture toughness characterisation of woven composite laminates. Part II: Experimental characterisation." Engineering Fracture Mechanics 131 (2014): 361-370.
  • S. Budhe, A. Rodríguez-Bellido, J. Renart, J.A. Mayugo, J. Costa "Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs ." International Journal of Adhesion and Adhesives 49 (2014): 80-89.
  • T.A. Sebaey; J. Costa; P. Maimí; Y. Batista; N. Blanco; J.A. Mayugo "Measurement of the in situ transverse tensile strength of composite plies by means of the real time monitoring of microcracking." Composites. Part B, Engineering 65 (2014): 40-46.
  • V. Álvarez;... L. Ripoll "Characterization of a medium size Xe/TMA TPC instrumented with microbulk Micromegas, using low-energy γ-rays." Journal of Instrumentation 9 (2014): -.
  • Vilanova, I.; Torres, L.; Baena, M.; Kaklauskas, G.; Gribniak, V. "Experimental study of tension stiffening in GFRP RC tensile members under sustained load." Engineering Structures 79 (2014): 390-400.
  • T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; J. Costa "Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization ." Composite Structures 95 (2013): 569-576.
  • T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; J. Costa "Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effect." Composite Structures 106 (2013): 30-32.
  • T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; J. Costa "Damage resistance and tolerance of dispersed CFRP laminates: Effect of ply clustering." Composite Structures 106 (2013): 96-103.
  • T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; P. Maimí; J. Costa "Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies ." Composite Structures 101 (2013): 255-264.
  • Álvarez Puerta, Vicente ; Cervera Villanueva, Anselmo ; Borges, F.I.G.M. ; Cárcel García, Sara ; Castel, J. ; Cebrián, S. ; Cervera Villanueva, Anselmo ; Condel, C.A.N. ; Dafni, T. ; Dias, T.H.V.T. ; Díaz Medina, José ; Egoro "Near-Intrinsic Energy Resolution for 30 to 662 keV Gamma Rays in a High Pressure Xenon Electroluminescent TPC." Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment 708 (2013): 101-114.
  • Álvarez, V.; Ripoll, L.[et al.] "Design and characterization of the SiPM tracking system of the NEXT-DEMO, a demonstrator prototype of the NEXT-100 experiment." Journal of Instrumentation 8(5) (2013): -.
  • Álvarez, V.; Ripoll, L.[et al.] "Initial results of NEXT-DEMO, a large-scale prototype of the NEXT-100 experiment." Journal of Instrumentation 8(4) (2013): -.
  • Álvarez, V.; Ripoll, L.[et al.] "Ionization and scintillation response of high-pressure xenon gas to alpha particles." Journal of Instrumentation 8 (2013): -.
  • Álvarez, V.; Ripoll, L.[et al.] "Operation and first results of the NEXT-DEMO prototype using a silicon photomultiplier tracking array." Journal of Instrumentation 8 (9) (2013): -.
  • Álvarez, V.; Ripoll, L.[et al.] "Radiopurity control in the NEXT-100 double beta decay experiment: Procedures and initial measurements." Journal of Instrumentation 8 (1) (2013): -.
  • Baena, M.; Torres, Ll.; Turon, A.; Miàs, C. "Analysis of cracking behaviour of tension stiffening in FRP reinforced concrete tensile elements ." Composites. Part B, Engineering 45 (2013): 1360-1367.
  • Barris, C.; Torres, L.; Comas, J.; Miàs, C. "Cracking and deflections in GFRP RC beams: An experimental study ." Composites. Part B, Engineering 55 (2013): 580-590.
  • Cahís X; Benavent-Climent A; Catalán A "Modelo numérico del comportamiento histerético de uniones entre forjados reticulares y pilares de fachada.." Revista Internacional de Métodos Numéricos Para Cálculo y Diseño en Ingeniería 29 (2013): 248-259.
  • Daniel Piedrafita; Xavier Cahis; Enric Simon; Jordi Comas "A new modular buckling restrained brace for seismic resistant buildings." Engineering Structures 56 (2013): 1967-1975.
  • Gribniak, V.; Kaklauskas, G.; Torres, L.; Daniunas, A.; Timinskas, E.; Gudonis, E. "Comparative analysis of deformations and tension-stiffening in concrete beams reinforced with GFRP or steel bars and fibers. ." Composites. Part B, Engineering 50 (2013): 158-170.
  • Gribniak,V.; Bacinskas, D.; Kacianauskas, R.; Kaklauskas, G.; Torres, L. "Long-term deflections of reinforced concrete elements: accuracy analysis of predictions by different methods." Mechanics of Time-Dependent Materials 17 (2013): 297-313.
  • Kabeel, A.M.; Maimí, P.; Gascons, N.; Gonzalez, E.V. "Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions ." Composites Science and Technology 87 (2013): 42-49.
  • Maimí, P. ; Gonzalez, E.V. ; Gascons, N. ; Ripoll, L. "Size effect law and critical distance theories to predict the nominal strength of quasibrittle structures." Applied Mechanics Reviews 65 (2013): 020802-1-.
  • Miàs Oller, C; Torres, L.; Turon, A.; Barris Peña, C. "Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams ." Composite Structures 96 (2013): 279-285. 
  • Miàs, C.; Torres, Ll.; Turon, A.; Sharaky,I.A. "Effect of Material Properties on Long-term Deflections of GFRP Reinforced Concrete Beams ." Construction and Building Materials 41 (2013): 99-108.
  • P. Badalló; D. Trias; L. Marín; J.A. Mayugo "A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads." Composites. Part B, Engineering 47 (2013): 130-136.
  • Sans, D.; Renart, J.; Costa, J.; Gascons, N.; Mayugo, J.A. "Assessment of the influence of the crack monitoring method in interlaminar fatigue tests using fiber Bragg grating sensors ." Composites Science and Technology 84 (2013): 44-50.
  • Sebaey, T.A.; Lopes, C.S.; Blanco, N.; Mayugo, J.A. ; Costa, J. "Two-pheromone ant colony optimization to design dispersed laminates for aeronautical structural applications." Advances in Engineering Software 66 (2013): 10-18.
  • Sharaky, I.A.; Torres, L.; Baena, M.; Miàs Oller, C. "An experimental study of different factors affecting the bond of NSM FRP bars in concrete ." Composite Structures 99 (2013): 350-365.
  • Sharaky, I.A.; Torres, L.; Comas, J.; Barris, C. "Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) bars." Composite Structures 109 (2013): 8-22.
  • Sharaky, I.A.; Torres, Ll.; Baena, M.; Vilanova, I. "Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete ." Construction and Building Materials 38 (2013): 890-902.
  • T.A. Sebaey; N. Blanco; J. Costa; C.S. Lopes "Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates ." Composites Science and Technology 72 (2012): 1251-1256.
  • Barris, C.; Torres, Ll.; Baena, M; Pilakoutas, K.; Guadagnini, M. "Serviceability limit state of FRP RC beams ." Advances in Structural Engineering 15 (2012): 653-663.
  • Barris, C; Torres, Ll.; Miàs, C.; Vilanova, I. "Design of FRP reinforced concrete beams for serviceability requirements." Journal of Civil Engineering and Management 18 (2012): 843-857.
  • Camanho, P.P; Arteiro, A.; Turon, A.; Costa, J.; Guillamet, G.; González, E.V. "Structural integrity of thin-ply laminates." JEC Composites Magazine 49 (2012): 91-92.
  • D. Sans; S. Stutz; J. Renart; J.A. Mayugo; J. Botsis "Crack tip identification with long FBG sensors in mixed-mode delamination." Composite Structures 94 (2012): 2879-2887.
  • El Mansouri, N.E.; Espinach, F.X.; Julián, F.; Verdaguer, N.; Torres, Ll., Llop, M.F.; Mutjé, P. "Research on the suitability of organosolv semi-chemical triticale fibers as reinforcement for recycled HDPE composites. ." Bioresources 7 (2012): 5032-5047.
  • Gascons M., Blanco N., Simacek P., Peiro J., Advani S., Matthys K. "Impact of fibre bed on resin viscosity in liquid composite moulding simulations ." Applied Composite Materials 19 (2012): 669-688.
  • Gascons, M.; Blanco, N.; Matthys, K. "Evolution of manufacturing processes for fiber-reinforced thermoset tanks, vessels, and silos: a review." IIE Transactions 44 (2012): 476-489.
  • Gascons,M.; Blanco,N.; Mayugo,J.A.; Matthys,K. "A strategy to support design processes for fibre reinforced thermoset composite materials ." Applied Composite Materials 19 (2012): 297-314.
  • González, Emilio V.; Maimí, P.; Camanho, P.P.; Turon, A.; Mayugo, J.A. "Simulation of drop-weight impact and compression after impact tests on composite laminates." Composite Structures 94 (2012): 3364-3378.
  • Gutiérrez J.M.; Barbero, E.J.; Cairns, D.R.; Mucino, V.H.; Mayugo, J.A "Dynamic roughness and power dissipation of polymer films actuated with liquid crystal polymer inclusions." Smart Materials and Structures 21 (2012): Art. n.015003 -.
  • Lluís Torres; Kyriacos Neocleous; Kypros Pilakoutas "Design procedure and simplified equations for the flexural capacity of concrete members reinforced with fibre-reinforced polymer bars ." Structural Concrete 13 (2012): 119-129.
  • Marín Hernández, Lorena; Trias Mansilla, Daniel; Badalló i Cañellas, Pere; Mayugo Majó, Joan Andreu "Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithms ." Composite Structures 94 (2012): 3321-3326.
  • Sarrado, C.; Turon, A.; Renart, J.; Urresti, I. "Assessment of energy dissipation during mixed-mode delamination growth using cohesive zone models." Composites. Part A, Applied science and manufacturing (2012): 2128-2136.
  • Torres, Ll.; Miàs, C.; Turon, A.; Baena, M. "A rational method to predict long-term deflections of FRP reinforced concrete members ." Engineering Structures 40 (2012): 230-239.
  • V Álvarez; et al. ; Ripoll, Ll. "NEXT-100 Technical Design Report (TDR). Executive summary ." Journal of Instrumentation 7 (2012): -.
  • Vallejos, M.E.; Espinach, F.X.; Julián, F.; Torres, Ll.; Vilaseca, F.; Mutjé, P. "Micromechanics of hemp strands in polypropylene composites ." Composites Science and Technology 72 (2012): 1209-1213.
  • Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C. "Erratum to ' Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members' [Compos Struct 93 (2011) 2511-2520]." Composite Structures 94 (2011): 312-312.
  • Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C. "Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members ." Composite Structures 93 (2011): 2511-2520.
  • Gascons, M.; Blanco, N.; Vives, J.; Matthys, K. "Numerical implementation and experimental validation of a through-the thickness temperature model for non-isothermal vacuum bagging infusion." Journal of Reinforced Plastics and Composites 30 (2011): 1557-1570.
  • González, Emilio V.; Maimí, P.; Camanho, P.P.; Lopes, C.S.; Blanco, N. "Effects of ply clustering in laminated composite plates under low-velocity impact loading ." Composites Science and Technology 71 (2011): 805-817.
  • Hamdy A. Shehab; Mohamed A. Almetwally ; Salah Abd El-maged & Mohamed R. Emara, "Effect of cement alternative on the mechanical properties of self-compacting concrete using variable aggregate types." The Egyptian Int. Journal of Eng. Sciences &Technology, (2011): -.
  • Maimí, P.; Turon, A.; Trias, D. "Crack propagation in quasi-brittle two-dimensional isotropic lattices ." Engineering Fracture Mechanics 78 (2011): 60-70.
  • Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination ." Mechanics of Materials 43 (2011): 169-185.
  • Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part II: Evolution of crack density and delamination ." Mechanics of Materials 43 (2011): 194-211.
  • Martínez, V.; Güemes, A.; Trias, D.; Blanco, N. "Numerical and Experimental Analysis of Stresses and Failure in T-Bolt joints." Composite Structures 93 (2011): 2636-2645.
  • Pérez-Aparicio, J. L.; Ripoll, L. "Exact, integrated and complete solutions for composite flywheels." Composite Structures 93 (2011): 1404-1415.
  • Renart, J.; Blanco, N.; Pajares, E.; Costa, J.; Lazcano, S. "Side Clamped Beam (SCB) hinge system for delamination tests in beam-type composite specimens ." Composites Science and Technology 71 (2011): 1023-1029.
  • Sebaey, T.A.; Blanco, N.; Lopes, C.S.; Costa, J. "Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminates ." Composites Science and Technology 71 (2011): 1587-1592.
  • Sebaey, T.A.; Lopes, C.S.; Blanco, N.; Costa, J. "Ant Colony Optimization for dispersed laminated composite panels under biaxial loading ." Composite Structures 94 (2011): 31-36.
  • Benavent-Climent A, Cahis X, Vico JM "Interior wide beam-column connections in existing RC frames subjected to lateral earthquake loading ." Bulletin of Earthquake Engineering 8 (2010): 401-420.
  • Catalán, A.; Benavent-Climent, A.; Cahís, X. "Selection and scaling of earthquake records in assessment of structures in low-to-moderate seismicity zones ." Soil Dynamics and Earthquake Engineering 30 (2010): 40-49.
  • Franco, JM, Cahís X., Gracia L, Lòpez Almansa, F "Experimental testing of a new anti-seismic dissipator energy device based on the plasticity of metals ." Engineering Structures 32 (2010): 2672-2682.
  • Lopez-Almansa, F.; Roca, P.; Sarrablo, V.; Cahís, X.; Canet, J.M. "Experiments on Reinforced Brick Masonry Vaulted Light Roofs ." ACI Structural Journal 107 (2010): 355-363.
  • Mayugo, J.A.; Camanho, P.P.; Maimí, P.; Dávila, C.G. "Analytical Modelling of Transverse Matrix Cracking of [±θ,90n]s Composite Laminates under Multiaxial Loading ." Mechanics of Advanced Materials and Structures 17 (2010): 237-245.
  • Miàs Oller, C.; Torres, Ll.; Turon, A.; Baena Muñoz, M.; Barris Peña, C. "A Simplified method to obtain time-dependent curvatures and deflections of concrete members reinforced with FRP bars ." Composite Structures 92 (2010): 1833-1838.
  • Torres, Ll.; Barris Peña, C. "L'Ús de materials compostos en el reforç intern d'estructures de formigó ." Nivell: revista del Centre d'Estudis de la Construcció i Anàlisi de Materials (2010): 21-25.
  • Torres, Ll.; Miàs Oller, C.; Barris Peña, C.; Baena Muñoz, M. "Flechas diferidas en vigas de hormigón con barras de materiales compuestos." Cemento Hormigón 81 (2010): 36-41.
  • Turon, A.; Camanho, P.P.; Costa, J.; Renart, J. "Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness ." Composite Structures 92 (2010): 1857-1864.
  • Baena Muñoz, M.; Torres, Ll.; Turon, A.; Barris Peña, C. "Experimental study of bond behaviour between concrete and FRP bars using a pull-out test ." Composites. Part B, Engineering 40 (2009): 784-797.
  • Benavent-Climent, A.; Cahís, X. ; Catalán, A. "Seismic Behavior of Interior Connections in Existing Waffle-Flat-Plate Structures ." Engineering Structures 30 (2008): 2510-2516.
  • Blanco, N.; Gamstedt, E.K.; Costa, J. "Mechanical hinge system for delamination tests in beam-type composite specimens ." Composites Science and Technology 68 (2008): 1837-1842 .
  • Dávila, C.G.; Camanho, P.P.; Turon, A. "Effective simulation of delamination in aeronautical structures using shells and cohesive elements." Journal of Aircraft 45 (2008): 663-672.
  • Klein, J.; Obrador, M.; Gascons, N.; Reinkensmeyer, D.J. "The effect of dynamic arm support on grip forces and steering errors during simulated driving." International Journal Of Heavy Vehicle Systems 15 (2008): 449-459.
  • Maimí, P.; Mayugo, J.A.; Camanho, P.P. "A Three-dimensional Damage Model for Transversely Isotropic Composite Laminates ." Journal of Composite Materials 42 (2008): 2717-2745.
  • Camanho, P.P.; Maimí, P.; Dávila, C.G. "Prediction of size effect in notched laminates using continuum damage mechanics ." Composites Science and Technology 67 (2007): 2715-2727.
  • Davila, C.G.; Camanho, P.P.; Turon, A. "Cohesive elements for shells ." NASA/TM 214869 (2007): 1-22.
  • Maimí, P.; Camanho, P.P.; Mayugo, J.A.; Dávila, C.G. "A Continuum Damage Model for Composite Laminates. Part I-Constitutive model ." Mechanics of Materials 39 (2007): 897-908.
  • Maimí, P.; Camanho, P.P.; Mayugo, J.A; Dávila, C.G. "A Continuum Damage Model for Composite Laminates. Part II-Computational implementation and validation ." Mechanics of Materials 39 (2007): 909-919.
  • Trias, D.; Garcia, R.; Costa, J.; Blanco, N.; Hurtado, J.E. "Quality control of CFRP by means of digital image processing and statistical point pattern analysis ." Composites Science and Technology 67 (2007): 2438-2446.
  • Turon, A.; Camanho, P.P.; Costa, J.; Dávila, C.G. "A damage model for the simulation of delamination in advanced composites under variable-mode loading ." Mechanics of Materials 38 (2006): 1072-1089.
  • Turon, A.; Costa, J.; Camanho, P.P.; Dávila, C.G. "Simulation of delamination in composites under high-cycle fatigue loading ." Composites. Part A, Applied science and manufacturing 38 (2006): 2270-2282.
  • Turon, A.; Costa, J.; Camanho, P.P.; Davila, C.G. "Simulation of delamination propagation in composites under high-cycle fatigue by means of cohesive-zone models." NASA/TM 214532 (2006): 1-28.
  • Costa, J.; Turon, A.; Trias, D.; Blanco, N.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue ." Composites Science and Technology 65 (2005): 2269-2275.
  • Turon, A.; Costa, J.; Maimí, P.; Trias, D.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation ." Composites Science and Technology 65 (2005): 2039-2048.
  • Turon, A.; Davila, C.G.; Camanho, P.P.; Costa, J. "An engineering solution for using coarse meshes in the simulation of delamination with cohesive zone models ." NASA/TM 213547 (2005): 1-21.
  • Blanco, N.; Gamstedt, E.K.; Asp, L.E.; Costa, J. "Mixed-mode delamination growth in carbon-fibre composite laminates under cycling loading ." International Journal of Solids and Structures 41 (2004): 4219-4235.
  • Bozzo, L.M.; Torres, Ll. "A proposed semi-prefabricated prestressed composite steel-concrete slab." Proceedings of the Institution of CIVIL Engineers-Structures and Buildings 157 (2004): 309-317.
  • Torres, Ll.; López Almansa, F.; Bozzo, L.M. "Tension-stiffening model for cracked flexural concrete members." Journal of Structural Engineering - Asce 130 (2004): 1242-1251.
  • Turon, A.; Camanho, P.P.; Costa, J.; Davila, C.G. "An interface damage model for the simulation of delamination under variable-mode ratio in composite materials ." NASA/TM (2004): 1-32.
  • Pérez Aparicio, J.L.; Ripoll, L.; "Solución generalizada para piezas cilíndricas de material compuesto ." Materiales compuestos 1 (2003): 801-809.
  • Ripoll, L.; Pérez Aparicio, J.L. "Minimización de tensiones en cilindros bobinados mediante pretensado térmico." Materiales compuestos 1 (2003): 69-77.
  •  
  • Torres, Ll.; Cahís, X.; López, F.; Bozzo, L.M. "Modelo de comportamiento en servicio para estructuras reticulares de hormigón. Parte I: descripción del modelo y ejemplos de aplicación ." Hormigón y Acero 227 (2003): 43-53.
  • Torres, Ll.; Cahís, X.; López, F.; Bozzo, L.M. "Modelo de comportamiento en servicio para estructuras reticulares de hormigón. Parte II: diagrama tensión –deformación para elementos fisurados a flexión ." Hormigón y Acero 227 (2003): 55-65.
  • Torres, Ll.; López Almansa, F.; Cahís, X.; Bozzo, L.M. "A numerical model for sequential construction, repairing and strengthening of 2-D concrete frames ." Engineering Structures 25 (2003): 323-336.
  • Blanco, N.; Corbella, B.; Costa, J.; Renart, J.; Mayugo, J.A. "Comportamiento de laminados: modelo constitutivo de daño uniaxial para un haz de fibras de vidrio ." Anales de Mecánica de la Fractura 19B (2002): 433-438.
  • Roura, P.; Costa, J. "Radiative thermal emission from nanoparticles: a reversed story from quantum to classical theory ." European Journal of Physics 23 (2002): 191-203.
  • Roura, P.; Costa, J.; Farjas, J. "Is sintering enhanced under non-isothermal conditions? ." Materials science and engineering. A, Structural materials 337 (2002): 248-253.
  • Cahís, F.X.; Torres, Ll.; Bozzo, L.M. "Nuevo disipador para edificación sismoresistente. 1ª parte: caracterización y modelos de predicción." Hormigón y Acero 219 (2001): 91-101.
  • Cahís, X.; Torres, Ll.; Bozzo, L.M. "Nuevo disipador para edificación sismoresistente. 2ª parte: comportamiento de estructuras duales de un grado de libertad con disipadores ." Hormigón y Acero 220 (2001): 57-67.
  • Bertran, E.; Costa, J.; Viera, G.; Andújar, J.L.; Canillas, A.; Pascual, E. "Ultrafine particles produced by plasma enhanced chemical vapor deposition -from SiH4, CH4, NH3 and B2H6 gas mixtures- for nanostructured ceramics applications." Contributions to Science 1 (1999): 53-61.
  • Roura, P.; Costa, J.; López-de-Miguel M.; Garrido, B.; Fort, J.; Morante, J.R.; Bertran, E. "Blackbody emission in nanostructured materials." Journal of Luminescence 80 (1999): 519-522.
  • Viera, G.; Costa, J.; Compte, F.J.; García-Sanz, E.; Andújar, J.L.; Bertran, E.; "Accurate electrical measurements for in situ diagnosis of RF discharges in plasma CVD processes ." Vacuum 53 (1999): 1-5.
  • Viera, G.; Costa, J.; Roura, P.; Bertran, E. "High nucleation rate in pure SiC nanometric powder by room temperature plasmas and post-thermal treatments combination ." Diamond and Related Materials 8 (1999): 364-368.
  • Viera, G.; García-Caurel, E.; Costa, J.; Andújar, J.L.; Bertran, E. "Nanoparticles of Si-C-N from low temperature RF plasmas: selective size, composition and structure ." Applied Surface Science 144-145 (1999): 702-707.
  • Viera, G; Sharma, S.N.; Andújar, J.L.; Zhang, R.Q.; Costa, J.; Bertran, E. "Nanometric powder of stoichiometric silicon carbide produced in square-wave modulated RF glow discharges." Vacuum 52 (1999): 183-186.
  • Bertran, E.; Sharma, S.N.; Viera, G.; Costa, J.; St'ahel, P.; Roca i Cabarrocas, P. "Effect of the nanoparticles on the structure and crystallization of amorphous silicon thin films produced by rf glow discharge." Journal of Materials Research 13 (1998): 2476-2479.
  • Bozzo, L.M./ Barbat, A./ Torres, Ll. "Application of Qualitative Reasoning in Engineering." Applied Artificial Intelligence 12 (1998): 29-48.
  • Costa, J.; Roura, P.; Morante, J.R.; Bertran, E. "Blackbody emission under laser excitation of silicon nanopowder produced by plasma-enhanced chemical-vapour deposition ." Journal of Applied Physics 83 (1998): 7879-7885.
  • Roca i Cabarrocas, P.; Hamma, S.; Sharma, S.N., Viera, G.; Bertran, E.; Costa, J. "Nanoparticle formation in low-pressure silane plasmas: bridging the gap between a-Si:H and μc-Si films
  • Costa, J.; Campmany, J.; Canillas, A.; Andújar, J.L.; Bertran E. "In situ fast ellipsometric analysis of repetitive surface phenomena." Review of Scientific Instruments 68 (1997): 3135-3139.
  • Costa, J.; Suñol, J.J.; Saurina, J.; Roura, P.; Martínez, S.; Viera, G.; Bertran, E. "Calorimetric study of the thermal induced transformations of ultrafine silicon carbide powder produced by RF glow discharge ." Key Engineering Materials 132 (1997): 145-148.
  • Roura, P.; Costa, J.; Morante, J.R.; Bertran, E. "Gas collisions and pressure quenching of the photoluminescence of silicon-nanopowder grown by plasma-enhanced chemical vapor deposition ." Journal of Applied Physics 81 (1997): 3290-3293.
  • Viera, G.; Sharma S.N.; Costa, J.; Zhang, R.Q.; Andújar, J.L.; Bertran, E. "Effects of thermal and laser annealing on silicon carbide nanopowder produced in radio frequency glow discharge ." Diamond and Related Materials 6 (1997): 1559-1563.
  • Viera, G.; Sharma, SN.; Costa, J.; Zhang, RQ.; Andújar, JL.; Bertran, E. "Silicon carbide nanoparticles for advanced materials produced in radio frequency modulated glow discharges." Vacuum 48 (1997): 665-668.
  • Bertran, E.; Costa, J.; Viera, G.; Zhang, R.Q. "Production of nanometric particles in RF glow discharges of silane and methane gas mixture." Journal Of Vacuum Science & Technology a 14 (1996): 567-571.
  • Costa, J.; Bertran, E.; Andújar J.L. "Production of Boron Nitride Nanometric Powder by PECVD. Microstructural Characterization." Diamond and Related Materials 5 (1996): 544-547.
  • Costa, J.; Roura, P.; Canillas, A.; Pascual, E.; Morante, J.R.; Bertran, E. "On the structural origin of the photoluminescence in silicon powder produced in PECVD processes ." Thin Solid Films 276 (1996): 96-99.
  • Zhang, R.Q.; Costa, J.; Bertran, E.; "Role of structural saturation and geometry in the luminescence of silicon-based nanostructured materials." Physical Review B 53 (1996): 7847-7850.
  • Costa, J.; Roura, P.; Sulimov, N.; Sardin, G.; Morante, J.R.; Bertran, E. "Pressure dependence of PL in amorphous silicon nanopowder produced by PECVD.." Materials Science and Technology 11 (1995): 707-710.
  • Roura, P.; Costa, J.; Sardin, G.; Morante, J.R.; Bertran, E. "Photoluminescence in silicon powder grown by plasma-enhanced chemical- vapor deposition: evidence of a multistep-multiphoton excitation process ." Physical Review B 50 (1995): 18124-18133.
  • Roura, P.; Costa, J.; Sulimov, N.A.; Morante, J.R.; Bertran, E. "Pressure influence on the decay of the phololuminescence in Si-nanopowder grown by plasma enhanced chemical vapour deposition. ." Applied Physics Letters 67 (1995): 2830-2832.
  • Bertran, E.; Costa, J.; Sardin, G.; Campmany, J.; Andujar, J.L.; Canillas, A. "Effects of plasma processing on the microstructural properties of silicon powders." Plasma Sources Science & Technology 3 (1994): 348-354.
  • Costa, J.; Roura, P.; Sardin, G.; Morante, J.R.; Bertran, E. "Unusual photoluminescence properties in amorphous silicon nanopowder produced by plasma enhanced chemical vapor deposition." Applied Physics Letters 64 (1994): 463-465.
  • Costa, J.; Sardin, G.; Campmany, J.; Bertran, E. "Preparation of nanoscale amorphous silicon based powder in a square-wave-modulated rf plasma reactor ." Vacuum 45 (1994): 1115-1117.
  • Campmany, J.; Andujar, J.L.; Canillas, A.; Costa, J.; Bertran, E. "Optical, vibrational and compositional study of amorphous silicon oxynitride thin films grown by an RF plasma using N2O + SiH4 gas mixtures." Applied Surface Science 70,71 (1993): 695-700.
  • Campmany, J.; Bertran, E.; Canillas, A.; Andujar, J.L.; Costa, J. "Error minimization method for spectroscopic and phase-modulated ellipsometric measurements on highly transparent thin films." Journal of the Optical Society of America A-Optics, Image, Science, and Vision 10 (1993): 713-718.
  • Campmany, J.; Canillas, A.; Andujar, J.L.; Costa, J.; Bertran, E. "In situ real-time ellipsometric study of the growth of r.f. plasma deposited amorphous hydrogenated silicon oxynitride thin films ." Thin Solid Films 228 (1993): 137-140.
  • Campmany, J.; Canillas, A.; Andujar, J.L.; Costa, J.; Bertran, E. "Study of thin films of transparent electronic materials by phase-modulated spectroellipsometry ." Thin Solid Films 233 (1993): 223-226.

Article pendent de publicació

  • M. Cabello; A. Turon; J. Zurbitu; J. Renart; C. Sarrado; F. Martínez "Progressive failure analysis of DCB bonded joints using a new elastic foundation coupled with a cohesive damage model." International Journal of Plasticity (2016): -.

Proceeding

  • S. Cebrian,,. L. Ripoll "Radon and material radiopurity assessment for the NEXT double beta decay experiment." AIP Conference Proceedings 1672 (2015): -.
  • Ripoll, L.; Pérez Aparicio, J.L.; Maimí, P. "Solving stress equations in composite cylinders." 16th European Conference on Composite Materials, ECCM 2014 (2014): -.
  • Ripoll, L.; Pérez Aparicio, J.L. "Efecto perjudicial del transitorio en la hidratación del material compuesto aplicado volantes de inercia." Materiales compuestos (2007): -.
  • Ripoll, L.; Pérez Aparicio, J.L. "Análisis de las tensiones axiales en volantes de inercia de materiales compuestos." Materiales compuestos (2005): -.
  • Ripoll, L.; Ciurana, J.; Garcia-Romeu, M.L. "Aplicación de la acotación funcional para el rediseño provocado por avería del acoplamiento motor-reductor." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 2 (2000): 1011-1016.
  • Ripoll, L.; Martínez, V.; Pla, J. "Valores experimentales del coeficiente de rozamiento en uniones pretensadas empleando tornillos con recubrimiento orgánico." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 2 (2000): 1105-1110.

GREFEMA, Fluids, Energy & Environment Group

Publicacions en revista

  • Bové, J.; Puig-Bargués, J.; Arbat, G.; Duran-Ros, M.; Pujol, T.; Pujol, J.; Ramírez de Cartagena, F. "Development of a new underdrain for improving the efficiency of microirrigation sand media filters." Agricultural Water Management 179 (2017): 296-305.
  • Eduard Massaguer Colomer; Albert Massaguer Colomer; Toni Pujol Sagaró; Jose Ramon Gonzalez Castro; Lino Montoro Moreno "Modelling and analysis of longitudinal thermoelectric energy harvesters considering series-Parallel interconnection effect." Energy 129 (2017): 59-69.
  • Massaguer A.; Massaguer E.; Comamala M.; Pujol T.; Montoro L.; Cardenas M.D.; Carbonell D.; Bueno A.J. "Transient behavior under a normalized driving cycle of an automotive thermoelectric generator." Applied Energy 206 (2017): 1282-1296.
  • Quim Tarrés;Alexandre Deltell;F. Xavier Espinach;M. Àngels Pèlach;Marc Delgado-Aguilar;Pere Mutjé "Magnetic Bionanocomposites from cellulose nanofibers: fast, simple and effective production method." International Journal of Biological Macromolecules 99 (2017): 29-36.
  • Pujol, T.; Arbat, G.; Bové, J.; Puig-Bargués, J.; Duran-Ros, M.; Velayos, J.; Ramírez de Cartagena, F. "Effects of the underdrain design on the pressure drop in sand filters." Biosystems Engineering 150 (2016): 1-9.
  • Aguilera, Inmaculada;Foraster, Maria;Basagaña, Xavier;Corradi, Elisabetta;Deltell, Alexandre;Morelli, Xavier;Phuleria, Harish C;Ragettli, Martina S;Rivera, Marcela;Thomasson, Alexandre;Slama, Remy;Künzli, Nino "Application of land use regression modelling to assess the spatial distribution of road traffic noise in three European cities." Journal Of Exposure Science And Environmental Epidemiology 25 (2015): 97-105.
  • Bové, J.; Arbat, G.; Duran-Ros, M.; Pujol, T.; Velayos, J.; Ramírez de Cartagena, F.; Puig-Bargués, J. "Pressure drop across sand and recycled glass media used in micro irrigation filters." Biosystems Engineering 137 (2015): 55-63.
  • Bové, J.; Arbat, G.; Pujol, T.; Duran-Ros, M.; Ramírez de Cartagena, F.; Velayos, J.; Puig-Bargués, J. "Reducing energy requirements for sand filtration in microirrigation: improving the underdrain and packing." Biosystems Engineering 140 (2015): 67-78.
  • Comas,B.; Carmona, A.; Pujol, T "Experimental study of the channel effect on the flame spread over thin solid fuels." Fire Safety Journal (2015): 162-173.
  • Deltell, A; Escoda, L ; Saurina, J; Suñol, JJ "Martensitic transformation in Ni-Mn-Sn-Co Heusler alloys." Metals 5 (2015): 695-705.
  • Massaguer Colomer, Albert; Massaguer Colomer, Eduard; Pujol Sagaró, Toni; Montoro Moreno, Lino; Comamala Laguna, Martí; Gonzalez Castro, Josep Ramon "Electrically tunable thermal conductivity in thermoelectric materials: Active and passive control." Applied Energy 154 (2015): 709-717.
  • Massaguer Colomer, Eduard; Massaguer Colomer, Albert; Gonzalez Castro, Josep Ramon; Montoro Moreno, Lino "Modeling analysis of longitudinal thermoelectric energy harvester in low temperature heat recovery applications." Applied Energy 140 (2015): 184-195.
  • T Pujol; AK Vashisht; J Ricart; D Culubret; J Velayos "Hydraulic efficiency of horizontal waterwheels: Laboratory data and CFD study for upgrading a western Himalayan watermill." Renewable Energy 83 (2015): 576-586.
  • X. Morelli;M. Foraster;I. Aguilera;X. Basagana;E. Corradi;A. Deltell;R. Ducret-Stich;H. Phuleria;M.S. Ragettli;M. Rivera;A. Thomasson;N. Künzli;R. Slama "Short-term associations between traffic-related noise, particle number and traffic flow in three European cities." Atmospheric Environment 103 (2015): 25-33.
  • Foraster M; Künzli N; Aguilera I; Rivera M; Agis D; Vila J; Bouso L; Deltell A; Marrugat J; Ramos R; Sunyer J; Elosua R; Basagaña X "High Blood Pressure and Long-Term Exposure to Indoor Noise and Air Pollution from Road Traffic." Environmental Health Perspectives 122 (2014): 1193-1200.
  • Maria Foraster;Xavier Basagaña;Inmaculada Aguilera;Marcela Rivera;David Agis;Laura Bouso;Alexandre Deltell;Jaume Marrugat;Rafel Ramos;Jordi Sunyer;Joan Vila;Roberto Elosua;Nino Künzli "Association of Long-Term Exposure to Traffic-Related Air Pollution with Blood Pressure and Hypertension in an Adult Population-Based Cohort in Spain (the REGICOR Study).." Environmental Health Perspectives 122 (2014): 404-441.
  • Massaguer Colomer, Eduard; Massaguer Colomer, Albert; Montoro Moreno, Lino; Gonzalez Castro, Josep Ramon "Development and validation of a new TRNSYS type for the simulation of thermoelectric generators." Applied Energy 134 (2014): 65-74.
  • Arbat, G.; Puig-Bargués, J.; Duran-Ros, M.; Ramírez de Cartagena, F.; Pujol, T.; Montoro, L.; Barragán, J. "Hydrodynamic behaviour of the underdrains in microirrigation sand media filters using CFD software ." Acta Horticulturae 1008 (2013): 85-89.
  • B. Comas; T. Pujol "Energy balance models of downward combustion of parallel thin solid fuels and comparison to experiments." Combustion Science and Technology 185 (2013): 1820-1837.
  • Comas B; Pujol T "Flame front speed and onset of instability in the burning of inclined thin solid fuel samples." Physical Review E 88 (2013): 063019-1-063019-6.
  • G. Arbat; T. Pujol; J. Puig-Bargués; M. Duran-Ros; L. Montoro; J. Barragán; F. Ramírez de Cartagena "An experimental and analytical study to analyze hydraulic behavior of nozzle-type underdrains in porous media filters ." Agricultural Water Management 126 (2013): 64-74.
  • Planas Lladó, Anna; Feliu Soley, Lídia; Fraguell Sansbelló, Rosa Maria; Arbat Pujolras, Gerard; Pujol Planella, Joan; Roura-Pascual, Núria; Josep Suñol Martínez, Joan; Montoro Moreno, Lino "Student perceptions of peer assessment: an interdisciplinary study ." Assessment and Evaluation in Higher Education 39 (2013): 592-610.
  • Pujol, T.; Montoro, L.; Pelegrí, M.; González, J.R. "Learning hydraulic turbomachinery with computational fluid dynamics (CFD) codes." Computer Applications in Engineering Education 21 (2013): 684-690.
  • T. Pujol "Analytical model for the downward flame spread over a thermally thin fuel into an opposed flow ." Combustion Science and Technology 185 (2013): 794-816.
  • B. Comas, T. Pujol, "Experimental study of the effects of side-edge burning in the downward flame spread of thin solid fuels." Combustion Science and Technology 184 (2012): 489-504.
  • Fort, J; Pujol, T; vander Linden, M "Modelling the Neolithic transition in the Near East and Europe ." American Antiquity 77 (2012): 203-220.
  • Arbat, G.; Pujol, T.; Puig-Bargués, J.; Duran-Ros, M.; Barragán, J.; Montoro, L.; Ramírez de Cartagena, F. "Using computational fluid dynamics to predict head losses in the auxiliary elements of a microirrigation sand filter." Transactions Of The Asabe 54 (2011): 1367-1376.
  • Foraster, Maria;Deltell, Alexandre; Basagaña, Xavier; Medina-Ramon, Mercedes; Aguilera, Inmaculada;Bouso, Laura; Grau, Maria; Phuleria, Harish C.; Rivera, Marcela;Slama, Rémy; Sunyer, Jordi; Targa, Jaume; Künzli, Nino "local determinants of road traffic noise levels versus determinats of air pollution levels in a Mediterranean city ." Environmental Research 111 (2011): 177-183.
  • Pujol, T., Comas, B. "Analytical expressions for the flame front speed in the downward combustion of thin solid fuels and comparison to experiments ." Physical Review E 84 (2011): 026306-026310.
  • Pujol, T.; Montoro, L.; Silva, X. "Hydraulic power of slow-rotating waterwheels: a novel analytical approximation ." Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science 225 (2011): 1495-1506.
  • Rivera, Marcela; Zechmeister, Harald; Medina-Ramón, Mercedes; Basagaña, Xavier; Foraster, Maria; Bouso, Laura; Moreno, Teresa; Solanas, Pascual; Ramos, Rafael; Köllensperger, Gunda; Deltell, Alexandre; Vizcaya, David; Künzli, "Monitoring of heavy metal concentrations in home outdoor air using moss bags." Environmental Pollution 159 (2011): 954-962.
  • T. Pujol, B. Comas "Bounds for downward flame spread rate in solid fuels and comparison to experiments." Combustion Science and Technology 183 (2011): 1083-1106.
  • Pujol, T.; Montoro, L. "High hydraulic performance in horizontal waterwheels ." Renewable Energy 35 (2010): 2543-2551.
  • Pujol, T.; Solà, J.; Montoro, L.; Pelegrí, M. "Hydraulic performance of an ancient Spanish watermill ." Renewable Energy 35 (2010): 387-396.
  • Foraster, Maria; Medina-Ramón, Mercedes; Basagaña, Xavier; Bouso, Laura; Elosua, Roberto; Juvinyà, Dolors; Rivera, Marcela; Santos-Garcés, Eva; Kuenzli, Nino; Deltell, Alexandre "Noise and air pollution correlation and its determinants in the city of Girona ." Epidemiology 20 (2009): S180-.
  • Pujol, T.; Fort, J.; Montoro, L.; Suñol, J.J. "Generalyzed analytical expressions for the burning velocity in a combustion model with non-constant transport coefficients and several specific heats ." Physica. A, Statistical Mechanics and its Applications 388 (2009): 4959-4972.
  • Rivera, Marcela; Zechmeister, Harald; Medina-Ramón, Mercedes; Basagaña, Xavier; Bouso, Laura; Foraster, Maria; Deltell, Alexandre; Targa, Jaume; Solanas, Pascual; Ramos, Rafael; Vizcaya, David; Kuenzli, Nino "Estimation of Heavy Metals Concentrations in Outdoor Air Using Mosses ." Epidemiology 20 (2009): S77-.
  • Armengol Roura, J.; Calbó, J.; Pujol, T.; Roura, P. "Bernoulli correction to viscous losses : Radial flow between two parallel discs ." American Journal of Physics 76 (2008): 730-737.
  • Fort, J.; Pujol, T. "Progress in front propagation research ." Reports on Progress in Physics 71 (2008): 086001-086041.
  • Pardini, G.; Gispert, M.; Jordana, R.; Velayos, J. "Experimental use of composted grape seed and olive mill residues for amelioration of fertility and structural stability of soils." Compost Science and Utilization 16 (2008): 61-68.
  • Pujol, T.; Fort, J.; González Castro, J.R.; Montoro, L.; Pelegrí, M. "Bounds for the speed of combustion flames: the effect of mass diffusion ." Physica. A, Statistical Mechanics and its Applications 387 (2008): 1987-1998 .
  • Suñol, J.J.; Escoda, L.; Fort, J.; Pérez-Losada, J.; Pujol, T. "Structural and magnetic properties of a nanocrystalline Fe75Nb10Si5B10 alloy produced by mechanical alloying ." Materials Letters 62 (2008): 1673-1676.
  • Fort, J.; Pujol, T. "Time-delayed fronts from biased random walks ." New Journal of Physics 9 (2007): 234-235.
  • Macián, V.; Payri, R.; Tormos, B.; Montoro, L. "Applying analytical ferrography as a technique to detect failures in Diesel engine fuel injection systems ." Wear 260 (2006): 562-566.
  • Pujol, A.; Fort, J.; Méndez, V. "Consequences of inter-specific competition among multiple adaptive species in Daisyworld ." Theoretical and Applied Climatology 81 (2005): 137-147.
  • Fort, J.; Campos, D.; González, J.R.; Velayos, J. "Bounds for the propagation speed of combustion flames." Journal of Physics A: Mathematical and General 37 (2004): 7185-7198.
  • Fort, J.; Pujol, T.; Cavalli-Sforza, L.L. "Palaeolithic populations and waves of advance." Cambridge Archaeological Journal 14 (2004): 53-61.
  • Pujol, T. "Effects of convection on the removal of the multiplicity of stable states in 1-D vertical models." Quarterly Journal of the Royal Meteorological Society 130A (2004): 945-962.
  • Méndez, V.; Fort, J.; Pujol, T. "Effect of initial conditions on the speed of reaction-diffusion fronts." Physical Review E 67 (2003): 016213-1-016213-6.
  • Méndez, V.; Fort, J.; Pujol, T. "The speed of reaction-diffusion wavefronts in nonsteady media." Journal of Physics A: Mathematical and General 36 (2003): 3983-3993.
  • Ozawa, H.; Ohmura, A.; Lorenz, R.; Pujol, T. "The second law of thermodynamics and the global climate system - A review of the maximum entropy production principle." Reviews of Geophysics 41 (2003): 4/1018-.
  • Pujol, T. "Eddy heat diffusivity at maximum dissipation in a radiative-convective one-dimensional climate model." Journal of the Meteorological Society of Japan 81 (2003): 305-315.
  • V. Macián Martínez, B. Tormos Martínez, P. Olmeda González, L. Montoro Moreno, E. Anubla Lucía. "Results and Benefits of an Oil Analysis Programme for Railway Locomotive Diesel Engines.." Insight 45 (2003): 402-406.
  • V. Macián Martínez, B. Tormos Martínez, P. Olmeda González, L. Montoro. "Analytical Approach to Wear Rate Determination for Internal Combustion Engine Condition Monitoring Based on Oil Analysis.." Tribology International (2003): -.
  • Funoses, V.; Arnau, J.; Corretger, J.M.; Deltell, A. "Proyecto de una instalación solar térmica para un hotel de 3 estrellas." El Instalador 1 (2002): 55-61.
  • Méndez, V.; Pujol, T.; Fort, J. "Dispersal probability distributions and the wavefront speed problem." Physical Review E 65 (2002): 041109-.
  • Pujol, T. "Effects of the non-gray absorption in a simple radiative equilibrium model." Planetary and Space Science 50 (2002): 1049-1054.
  • Pujol, T. "The consequences of maximum thermodynamic efficiency in Daisyworld." Journal of Theoretical Biology 217 (2002): 53-60.
  • Pujol, T.; Fort, J. "States of maximum entropy production in a one-dimensional vertical model with convective adjustment." Tellus A 54 (2002): 363-369.
  • Pujol, T.; Fort, J. "The effect of atmospheric absorption of sunlight on the runaway greenhouse point." Journal of Geophysical Research 107 (2002): 4566-.
  • Pujol, T.; North, G. R. "Runaway greenhouse in a simple model." Bulletin of the American Meteorological Society 83 (2002): 1455-1456.
  • Pujol, T.; North, G.R. "Runaway Greenhouse Effect in a Semigray Radiative-Convective Model ." Journal of the Atmospheric Sciences 59 (2002): 2801-2810.
  • Arnau, Josep "L'ús de l'aigua residual depurada." Eficiència energètica 151 (2000): 16-17.
  • Fort, J., Pujol, T., Cukrowski, A.S. "Several-temperature systems: extended irreversible thermodynamics and thermal wavefront propagation." Journal of Physics A-Mathematical and General 33 (2000): 6953-6973.
  • Pujol, T.; Llebot J.E. "Extremal climatic states simulated by a 2-Dim model. Part I: Sensitivity of the model and present state." Tellus A 52 (2000): 422-439.
  • Pujol, T.; Llebot J.E. "Extremal climatic states simulated by a 2-Dim model. Part II: Different climatic scenarios." Tellus A 52 (2000): 440-454.
  • Fort, J., Llebot, J. E., Pujol, T. "Extended thermodynamics of heat transport and energy equilibration in radiative systems." Journal of Physics A-Mathematical and General 32 (1999): 3095-3104.
  • Pujol, T., Llebot, J. E., Fort, J. "Greenhouse gases and climatic states of minimum entropy production." Journal of Geophysical Research 104 (1999): 24257-24263.
  • Pujol, T., Llebot, J.E. "Extremal principle of entropy production in the climate system." Quarterly Journal of the Royal Meteorological Society 125 (1999): 79-90.
  • Pujol, T., Llebot, J.E. "Periodic solutions in low-dimensional climatic models." Journal of Climate 12 (1999): 325-333.
  • Pujol, T., Llebot, J.E. "Second differential of the entropy as a criterion for the stability in low-dimensional climate models." Quarterly Journal of the Royal Meteorological Society 125 (1999): 91-106.
  • Pujol, T., Llebot, J.E. "Entropy production in thermodynamic climate models." Journal of non-Equilibrium Thermodynamics 23 (1998): 62-86.

Proceedings

Jollyn, I.T.; Pujol, Toni; De Paepe, M.; Massaguer, Albert; Montoro, Lino "Plate fin heat sink modelling and design considerations for thermoelectric generators." Renewable Energy & Power Quality Journal 1 (2017): -.

Luo, Ningsu; Pujol, Toni; Pacheco, L; González, JR; Bramon, J.V.; Massaguer, Albert "Development of small-scale wind energy systems adaptable to climatic conditions using chattering torque control - PI pitch control and CAES strategy." Renewable Energy & Power Quality Journal 1 (2017): -.

Massaguer, Albert; Massaguer, Eduard; Comamala, Martí; Cabot, Andreu; González, J.R.; Deltell, A "Experiments and Simulations of an Automotive Exhaust Thermoelectric System"

Montoro, Lino; Massaguer, Albert; Massaguer, Eduard; Comamala, Martí; Fernández, R; Deltell, A "Utilization of residual heat in Diesel engines, CFD simulation of a thermoelectric generator." Renewable Energy & Power Quality Journal 1 (2017): -.

Massaguer Colomer, Albert; Massaguer Colomer, Eduard; Pujo Sagaró, Toni; Comamala Laguna, Martí; Valayos Solé, Joaquim "Blade shape influence on aerodynamic efficiency of a Magnus wind turbine using particle image velocimetry ." Renewable Energy & Power Quality Journal (2014): -.

Massaguer Colomer, Albert; Melendez, Joaquim; Herraiz, Sergio "Energy consumption profiles in buildings." Renewable Energy & Power Quality Journal (2014): -.

Massaguer Colomer, Eduard; Gonzalez Castro, J.R.; Massaguer Colomer, Albert; Ricart Ferrer, Josep; Lorenz, Sofia "The potential of Earth-to-Air Heat Exchangers for reducing energy demand in Spanish dwellings ." Renewable Energy & Power Quality Journal (2014): -.

Massaguer Colomer, Eduard; Montoro Moreno, Lino; Massaguer Colomer, Albert; Deltell Carbonell, Alex; Lorenz, Sofia "Study of the influence of hot water consumption pattern on SHW systems under solar Spanish regulation compliance using TRNSYS ." Renewable Energy & Power Quality Journal (2014): -.

Publicacions en revistes

Abstract
  • Giménez Leal, G.; Casadesus, M.; Valls, J. "La introducción de nuevas tecnologías de la información en empresas altamente automatizadas." Revista Valenciana de Estudios Económicos (1999): 437-438.
Altres
  • Vázquez, E.; Ciurana, J.; Lopez de la Calle, N. "Crisis o Reconversión. Una vía para mitigar: reconversión del fresado." IMHE (2009): 42-47.
Articles
  • Bagudanch, I.; Centeno, G.; Vallellano, C.; Garcia-Romeu, M.L. "Revisiting formability and failure of polymeric sheets deformed by single point incremental forming." Polymer Degradation and Stability 144 (2017): 366-377.
  • Bagudanch, I.; Vives-Mestres, M.; Sabater, M.; Garcia-Romeu, M.L. "Polymer incremental sheet forming process: temperature analysis using response surface methodology." Materials and Manufacturing Processes 32 (2017): 44-53.
  • Centeno, G.; Morales-Palma, D.; Gonzalez-Perez-Somarriba, B.; Bagudanch, I.; Egea-Guerrero, J.J.; Gonzalez-Perez, L.M.; Garcia-Romeu, M.L.; Vallellano, C. "A functional methodology on the manufacturing of customized polymeric cranial prostheses from CAT using SPIF." Rapid Prototyping Journal 23 (2017): 771-780.
  • Dalilis Escobar Rivera; Jorge Isvel Salazar Marrero; Alexandra Simon Villar "Auditors selection and audit team formation in integrated audits." QUALITY access to success 18 (2017): -.
  • Guerra , Antonio J; Farjas, Jordi; Ciurana Joaquim "Fibre laser cutting of polycaprolactone sheet for stents manufacturing: A feasibility study." Optics and Laser Technology 95 (2017): 113-123.
  • Guerra, A.J. Joaquim Ciurana "3D-printed bioabsordable polycaprolactone stent: The effect of process parameters on its physical features." Materials and Design (2017): -.
  • Guerra, Antonio J., Joaquim Ciurana "Effect of fibre laser process on in-vitro degradation rate of a polycaprolactone stent a novel degradation study method." Polymer Degradation and Stability 142 (2017): 42-49. 
  • Castellano, J.; Ribera, A.; Ciurana, J. "Integrated system approach to evaluate social, environmental and economics impacts of buildings for users of housings." Energy and Buildings 123 (2016): 106-118.
  • Castelló, J., Giménez, G. and De Castro, R. "ISO 9001 aspectes related to performance and their level of implementation." Journal of Industrial Engineering and Management 9 (2016): 73-89.
  • Ciurana, J., Rodríguez, C.A. "Trends in nanomaterials and processing for drug delivery of polyphenols for cancer and other treatments." Current Drug Targets 17 (2016): 1-12.
  • Cots, S. ; Casadesús, M. ; Marimon, F. "Benefits of ISO 20000 IT service management certification." Information Systems and E-Business Management 14 (2016): 1-18.
  • Dalilis Escobar Rivera Alexandra Simon Villar Mayra Rosario Moreno Pino "Towards to the Concept of Risk Approach in the Audit Integrated Management System." QUALITY access to success 17 (2016): 41-47.
  • Dalilis Escobar Rivera; Mayra Rosario Moreno Pino; Luis Cuevas Rodríguez "La calidad de la auditoría en Sistemas de Gestión. Software audit_integrated." Ciencias Holguín 22 (2016): 1-17.
  • Dalilis Escobar-Rivera1; Anabel Lisbeth Aguilera-Sánchez; Yaima de la Caridad Parra-Pompa "Propuesta metodológica para la orientación de aplicaciones informáticas hacia BPM y SOA." Revista Cubana de Ciencias Informáticas 10 (2016): 39-54.
  • Giro-Perafita, A., Rabionet, M., Puig, T., Ciurana, J. "Optimization of Poli(ɛ-caprolactone) scaffolds suitable for 3D cancer cell culture." Procedia CIRP 49 (2016): 61-66.
  • González Carrasco, Mònica; Francés Ortega, Jesús; Castro Vila, Rodolfo de; Castañer Vivas, Margarida; San Molina, Joan; Marti Bonmati, Joan "The development of professional competences using the interdisciplinary project approach with university students." Journal of Technology and Science Education 6 (2016): 121-134.
  • Grabalosa, J.; Ferrer, I.; Elias, A.; Ciurana, J. "Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding." Materials & Design 98 (2016): 20-30.
  • Jordi Castellano; Albert Ribera; Joaquim Ciurana "Integrated system approach to evaluate social, environmental and econòmics impacts of buildings for user of housings." Energy and Buildings (2016): 106-118.
  • Kafel, P.; Casadesús, M. "The order and level of management standards implementation - changes during the time." The TQM Journal 28 (2016): 636-647.
  • Maudes, J.; Bustillo, A.; Guerra, Antonio J.; Ciurana, J. "Random Forest ensemble prediction of stent dimensions in microfabrication processes." International Journal of Advanced Manufacturing Technology (2016): 1-15.
  • Palomeras, Sònia; Rabionet Díaz, Marc; Ferrer Real, Inés; Sarrats Carbó, Ariadna; Garcia-Romeu, Maria Luisa; Puig i Miquel, Teresa; Ciurana, Quim de "Breast Cancer Stem Cell Culture and Enrichment Using Poly(ε-Caprolactone) Scaffolds." Molecules 21 (2016): 537-.
  • Ricondo Iriondo, Itziar; Serrano Lasa, Ibon; De Castro Vila, Rodolfo "Takt time as a lever to introduce lean production in mixed engineer-to-order/make-to-order machine tool manufacturing companies." International Journal of Industrial Engineering: Theory, Applications and Practice 23 (2016): 94-107.
  • Bagudanch, I.; Garcia-Romeu, M.L.; Centeno, G.; Elias-Zúñiga, A.; Ciurana, J. "Forming force and temperature effects on single point incremental forming of polyvinylchloride." Journal of Materials Processing Technology 219 (2015): 221-229.
  • Bagudanch, I.; Garcia-Romeu, M.L.; Sabater, M. "Incremental forming of polymers: Process parameters selection from the perspective of electric energy consumption and cost." Journal of Cleaner Production 112 (2015): 1013-1024.
  • Bagudanch, I.; Lozano-Sánchez, L.M.; Puigpinós, L.; Sabater, M.; Elizalde, L.E.; Elías-Zúñiga, A.; Garcia-Romeu, M.L. "Manufacturing of polymeric biocompatible cranial geometry by single point incremental forming." Procedia Engineering 132 (2015): 267-273.
  • Castellano, J., Castellano, D., Ribera, A., Ciurana, J. "Developing a simplified methodology to calculate CO2/m2 emissions per year in the use phase of newly-built, single-family houses." Energy and Buildings 109 (2015): 90-107.
  • Cots, S.; Casadesús, M. "Exploring the Service Management Standard ISO 20000." Total Quality Management and Business Excellence 26 (2015): 515-533.
  • E. Vázquez; J. Gomar; J. Ciurana; C. Rodríguez "Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes." International Journal of Advanced Manufacturing Technology 76 (2015): 219-228.
  • Freitas, M.S., Sereno, L., Silveira, Z., Silva, J.V.L., Ciurana J. "Thermal model for curing implantable silicone in the moulding process applied to tracheal stents." Applied Thermal Engineering 75 (2015): 1001-1010.
  • Laskurain, I.; Heras, I.; Casadesús, M. "Fostering renewable energy sources by standards for environmental and energy management." Renewable & Sustainable Energy Reviews 50 (2015): 1148-1156.
  • Laskurain, I.; Wulandari, M.; Heras, I.; Casadesús, M. "¿Resulta rendible la adopción de sistemas de gestión energética? Evidencias de un estudio empírico." Dyna : ingeniería e indústria 90 (2015): 1-5.
  • Monroy, K., Delgado, J., Sereno, L., Ciurana, J., Hendrichs, N. J. "Geometrical feature analysis of Co-Cr-Mo single tracks after Selective Laser Melting Processing." Rapid Prototyping Journal 21 (2015): 287-300.
  • Monroy, K., Pupo, Y., Sereno, L., Ciurana, J. "Spectrum Transmission Measurement of a Fiber Laser Beam in Polymethyl Metacrylate for Laser Sintering Processing." Procedia Engineering 132 (2015): 94-101.
  • Negre, P., Grabalosa, J., Ferrer, I., Ciurana, J., Elías-Zúñiga, A., Rivillas F. "Study of the Ultrasonic Molding Process Parameters for Manufacturing Polypropylene Parts." Procedia Engineering 132 (2015): 7-14.
  • Pentji, L.; Marimon, F.; Casadesús, M. "The mechanisms through which certain variables influence customer loyalty: the mediating roles of perceived value and satisfaction." Human Factors and Ergonomics in Manufacturing and Service Industries 25 (2015): 627-637.
  • Pupo, Y.; Monroy, K.; Ciurana, J. "Influence of process parameters on surface quality of CoCrMo produced by Selective Laser Melting." International Journal of Advanced Manufacturing Technology 80 (2015): 985-995.
  • Simon, A.; Kafel, P.; Nowicky, P.; Casadesús, M. "The development of complaints handling standards in Spa Companies: A case study analysis." International Journal for Quality Research 9 (2015): 675-688.
  • Teixidor, D; Grzenda, M; Bustillo, A; Ciurana, J. "Modeling pulsed laser micromachining of micro geometries using machine-learning techniques." Journal of Intelligent Manufacturing 26 (2015): 801-814.
  • Vázquez, E.; Gomar, J.; Ciurana, J.; Rodríguez, C. "Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V." Journal of Cleaner Production 87 (2015): 906-913.
  • Allur, E. ; Heras, I.; Casadesús, M. "Internalization of ISO 9001: A longitudinal survey." Industrial Management and Data Systems 114 (2014): 872-885.
  • Allur, E.; Heras, I.; Casadesús, M. "¿Que organizaciones interiorizan más los principios de la Gestión de la Calidad Total, las organizaciones del sector servicio o las industriales?." TMQ Techniques, Methodologies and Quality 5 (2014): 53-70.
  • Ciurana, J. "Designing, prototyping and manufacturing medical devices: an overview ." International Journal of Computer Integrated Manufacturing 27 (2014): 901-918.
  • Elías-Zúñiga, A.; Baylón, K.; Ferrer, I.; Serenó, L.; García-Romeu, M.L.; Bagudanch, I.; Grabalosa, J.; Pérez-Recio, T.; Martínez-Romero, O.; Ortega-Lara, W.; Elizalde, L.E. "On the rule of mixtures for predicting stress-softening and residual strain effects in biological tissues and biocompatible materials ." Materials 7 (2014): 441-456.
  • G. Centeno; I. Bagudanch; A.J. Martínez-Donaire; M.L. Garcia-Romeu; C. Vallellano "Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming." Materials and Design 63 (2014): 20-29.
  • I. Bagudanch; O. Martínez-Romero; A. Elías-Zúñiga; M.L. Garcia-Romeu "Identifying polymeric constitutive equations for incremental sheet forming modelling." Procedia Engineering 81 (2014): 2292-2297.
  • Iglesias, A., Munoa, J., Ciurana J. "Optimization of face milling operations with structural chatter using a stability model based process planning methodology ." International Journal of Advanced Manufacturing Technology 70 (2014): 559-571.
  • Jordi Castellano, David Castellano, Albert Ribera, Joaquim Ciurana "Developement of a scale of building construction system according to CO2 emissions in the use stage of their life cycle." Building and Environment (2014): 618-627.
  • Kemmoku, D.T.; Sereno, L; San J.; Ciurana, J. "A novel simplified 3D skull model to predict cranial fracture patterns." International Journal of Computer Integrated Manufacturing 27 (2014): 927-935.
  • Melgoza, E.L., Vallicrosa, G., Sereno, L., Ciurana, J., Rodríguez, C. "Rapid tooling using 3D printing system for manufacturing of customized tracheal stent." Rapid Prototyping Journal 20 (2014): 2-12.
  • Monroy, K., Delgado, J., Sereno, L., Ciurana, J., Hendrichs, N. J. "Effects of Selective Laser Melting Manufacturing Process on the Properties of CoCrMo Single Tracks." Metals and Materials International 20 (2014): 873-884.
  • Nowicki, P.; Simon, A.; Kafel, P. ; Casadesús, M. "Recognition of customers satisfactions standards of ISO 10000 family by spa enterprises - a case study analysis." TMQ Techniques, Methodologies and Quality 5 (2014): 91-105.
  • O. Martínez-Romero; M.L. Garcia-Romeu; D. Olvera-Trejo; I. Bagudanch; A. Elías-Zúñiga "Tool dynamics during single point incremental forming process." Procedia Engineering 81 (2014): 2286-2291.
  • Pentji, L.; Marimon, F. ; Casadesús, M. "The revitalizing role of ISO 9001 on dissatisfied customers." Total Quality Management and Business Excellence 25 (2014): 856-864.
  • Pupo, Y., Sereno, L., Ciurana, J. "Surface quality analysis in Selective Laser Melting with CoCrMo powders." Materials Science Forum 797 (2014): 157-162.
  • Santos, P., Teixidor, D., Maudes, J., Ciurana, J. "Modelling laser milling of micro-cavities for the manufacturing of DES with ensembles ." Journal of Applied Mathematics (2014): -.
  • Simon, A.; Pentji, L.; Karapetrovic, S.; Casadesús, M. "An empirical analysis of the integration of internal and external management systems audits." Journal of Cleaner Production 66 (2014): 499-506.
  • Simon, A.; Pentji, L.; Karapetrovic, S.; Casadesús, M. "Can integration difficulties affect innovation and satisfaction?." Industrial Management and Data Systems 114 (2014): 183-202.
  • Teixidor, D., Ciurana, J., Rodriguez, C.A. "Dross formation and process parameters analysis of fiber laser cutting of stainless steel thin sheets." International Journal of Advanced Manufacturing Technology 71 (2014): 1611-1621.
  • Vázquez, E., Amaro, A., Ciurana J., Rodríguez, C.A. "Process planning considerations for micromilling of mould cavities ." Precision Engineering 39 (2014): 252-260.
  • Vázquez, E., Kenmoku, D., Noritomi, P., Silva, J.V.L., Ciurana J. "Computer Fluid Dynamics analysis for efficient cooling and lubrication conditions in micromilling of Ti6Al4V." Materials and Manufacturing Processes 29 (2014): 1494-1501.
  • Allur, E.; Heras, I.; Casadesús, M. "Estudio de la adopción y el abandono de modelos de gestión de la calidad en centros gerontológicos de la CAPV." ZERBITZUAN 54 (2013): 85-95.
  • Bagudanch I.; Centeno G.; Vallellano C.; Garcia-Romeu M.L.; "Forming force in Single Point Incremental Forming under different bending conditions ." Procedia Engineering 63 (2013): 354-360.
  • Bagudanch I.; Elias-Zúñiga, A. ;Garcia-Romeu M.L.; "Evaluating material constitutive equations for the simulation of Incremental Sheet Forming applied to form thermoplastic materials ." Key Engineering Materials 554-557 (2013): 1312-1319.
  • Bagudanch I.; Garcia-Romeu M.L.; Ferrer, I. ; Lupiañez, J. "The effect of process parameters on the energy consumption in Single Point Incremental Forming ." Procedia Engineering 63 (2013): 346-353.
  • Casadesús, M. "MOOCs: Nou paradigma a la Universitat?." L'Avenç. Revista catalana d'història 389 (2013): 4-5.
  • Centeno G.; Bagudanch I.; Garcia-Romeu M.L.; Martinez-Donaire A.J.; Vallellano C. "Experimental study on the overall Spifability of AISI 304 sheets under different bending conditions ." Key Engineering Materials 554-557 (2013): 2293-2298.
  • Ciurana, J., Sereno, L., Vallés, E. "Selecting process parameters in RepRap additive manufacturing system for PLA scaffolds manufacture." Procedia CIRP 5 (2013): 152-157.
  • Ciurana, J.; Hernandez L.; Delgado, J. "Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material." International Journal of Advanced Manufacturing Technology 68 (2013): 1103-1110.
  • Cots, S. ; Casadesús, M. "Implementing ISO 20000: proposals from learned lessons." TMQ Techniques, Methodologies and Quality (2013): 12-31.
  • Domingos, M., Intranuovo, F., Russo, T., De Santis, R., Gloria, A., Ambrosio, L., Ciurana J., Bartolo, P. "The first systematic analysis of 3D rapid prototyped poly(ε-caprolactone) scaffolds manufactured through BioCell Printing: the effect of pore size and geometry on compressive mechanical behavior and in vitro hMSC viability." Biofabrication 5 (2013): 045004-.
  • Karla P. Monroy-Vázquez; Aldo Attanasio; Elisabetta Ceretti; Héctor R. Siller; Nicolás J. Hendrichs-Troeglen; Claudio Giardini "Evaluation of Superficial and Dimensional Quality Features in Metallic Micro-Channels Manufactured by Micro-End-Milling ." Materials 6 (2013): 1434-1451.
  • Karla P. Monroy-Vázquez; Elisabetta Ceretti; Claudio Giardini "Cutting Force Modeling." Procedia CIRP (2013): -. 
  • Monroy, K., Delgado, J., Ciurana, J. "Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process ." Procedia CIRP 63 (2013): 361-369.
  • Petnji Yaya, L.; Marimon, F; Casadesus, M "Can ISO 9001 improve service recovery? ." Industrial Management and Data Systems 113 (2013): 1206-1221.
  • Petnji, L.H.; Marimon, F.; Casadesus, M "The contest determinant of delight and disappointment: a case study of online banking." Total Quality Management and Business Excellence 24 (2013): 1376-1389.
  • Pupo, Yurivania; Delgado Sanglas, Jordi; Serenó, Lídia; Ciurana, Quim de "Scanning space analysis in Selective Laser Melting for CoCrMo powder." Procedia Engineering 63 (2013): 370-378.
  • Sereno, L., Ferrer, I., Soy, F., Salvador, A., Elias-Zuñiga, A., Pérez, T., Ciurana, J. "Designing and prototyping of new device for Scapholunate ligament repair." Procedia CIRP 5 (2013): 270-275.
  • Simon, A.; Bernardo, M.; Casadesús, M.; Karapetrovic, S. "Implementing integrated management systems in chemical firms." Total Quality Management and Business Excellence 24 (2013): 294-309.
  • Teixidor, D., Ciurana, J., Rodriguez, C.A. "Multi-objective optimization of laser milling parameters of micro-cavities for the manufacturing of DES." Materials and Manufacturing Processes 28 (2013): 1370-1378.
  • Teixidor, D., Ferrer, I., Ciurana, J., Ozel, T. "Optimization of Process Parameters for Pulsed Laser Milling of Micro-channels on AISI H13 Tool Steel." Robotics and Computer-Integrated Manufacturing 29 (2013): 209-218.
  • Teixidor, D., Quintana, G., Ciurana, J. "Experimental introduction to surface roughness parameters measurement." Materials Science Forum 759 (2013): 63-71.
  • Bartolo, P. J., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K.P., Mitsuishi, M., Ciurana, J., Leu, M. "Biomedical production of implants by additive electro-chemical and physical processes." CIRP Annals - Manufacturing Technology 61 (2012): 635-655.
  • Bernardo, M.; Casadesús, M.; Karapetrovic, S.; Heras, I. "Integration of standardized management systems: Does the implementation order matter? ." International Journal of Operations & Production Management 32 (2012): 291-307.
  • Bernardo, M.; Casadesús, M.; Karapetrovic, S.; Heras. I. "Do integration difficulties influence management system integration levels? ." Journal of Cleaner Production 21 (2012): 23-33.
  • Bernardo, M.; Valls, J.; Casadesús, M. "Strategic alliances: an analysis of Catalan hospitals ." Revista Panamericana de Salud Pública = Pan American Journal of Public Health 31 (2012): 40-47.
  • Bernardo, M; Heras, I.; Valls, J.; Casadesús, M. "Gestión de la calidad y excelencia empresarial: pasado, presente y futuro." Papeles de Economía Española 132 (2012): 227-238.
  • Blanch, R. ; Ferrer, I.; Garcia-Romeu, M.L.; Ciurana, J. "A model to build manufacturing process chains during embodiment design phases." International Journal of Advanced Manufacturing Technology 59 (2012): 421-432.
  • Casadesús, M.; Karapetrovic, S.; Heras, I.; "Augmentation of standardized quality management systems. An empirical view." International Journal Advanced Quality (2012): -.
  • Castillo, S.M.; Casadesús, M.; Karapetrovic, S; Coromina, L.; Heras, .I; Martin, I. "Is Implementing Multiple Management System Standards a Hindrance to Innovation?." Total Quality Management and Business Excellence 23 (2012): 1075-1088.
  • Delgado, J.; Ciurana, J.; "Mechanical characterization study of metal material properties in additive layer processes." International Journal of Mechatronics and Manufacturing Systems (IJMMS) 5 (2012): 189-213.
  • Delgado, J.; Ciurana, J.; Rodríguez, C.A. "Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials." International Journal of Advanced Manufacturing Technology 60 (2012): 601-610.
  • Díez-Pastor, J.-F. , Bustillo, A., Quintana, G., García-Osorio, C. "Boosting Projections to improve surface roughness prediction in high-torque milling operations." Soft Computing 16 (2012): 1427-1437.
  • Elisa Vázquez; Xavier Gómez; Joaquim Ciurana "An experimental analysis of process parameters to manufacture by milling micro-channels in biomaterials ." International Journal of Mechatronics and Manufacturing Systems (IJMMS) 5 (2012): 46-65.
  • Grzenda, M.; Bustillo, A.; Quintana, G.; Ciurana, J., "Improvement of surface roughness models for face milling operations through dimensionality reduction." International Journal of Computer Integrated Manufacturing 19 (2012): 179-197.
  • Heras, I.; Marimon, F.; Casadesus, M. "An empirical study of the relationships within the categories of the EFQM model ." Total Quality Management and Business Excellence 23 (2012): 523-540.
  • J. Gomar; A. Amaro; E. Vázquez; J. Ciurana; C. Rodriguez "Experimental analysis of process parameters to manufacture micro-cavities by micromilling." Advanced Materials Research SPECIAL ISSUE: Advances in Materials Processing Technologies 498 (2012): 91-96.
  • Llach, J.; De Castro, R.; Bikfalvi, A.; Marimon, F. "Relationship between Environmental Management Systems and Organisational Innovations ." Human Factors and Ergonomics in Manufacturing and Service Industries 22 (2012): 307-316.
  • Marimon, F.; Petnji Yaya, L.; & Casadesus Fa, M "Impact of e-Quality and service recovery on loyalty: A study of e-banking in Spain. ." Total Quality Management and Business Excellence 23 (2012): 769-787.
  • Melgoza, E.L., Sereno, L., Rosell, A., Ciurana, J. "Integrated parameterized tool for designing customized tracheal stent ." Computer Aided Design Journal 44 (2012): 1173-1181.
  • Perez-Santiago, R.; Bagudanch, I.; Garcia-Romeu, M.; Hendrichs, N. "Effect of Strain Hardening Exponent in the Incremental Sheet Forming Force. ." Steel Research International (2012): 439-442.
  • Petnji Yaya, L.; Marimon, F.; Casadesus Fa, M "Assessing e-service quality: the current state of E-S-QUAL." Total Quality Management and Business Excellence 23 (2012): 1363-1378.
  • Puigpinós, L.; Bagudanch, I.; Garcia-Romeu, M.; Perez-Santiago, R. "Incremental Sheet Forming (ISF) technology applied to form thin metal sheets. ." Steel Research International (2012): 443-446.
  • Quintana, G., Bustillo, A., Ciurana, J. "Prediction, monitoring and control of surface roughness in high-torque milling machine operations." International Journal of Computer Integrated Manufacturing 25 (2012): 1129-1138.
  • Quintana, G; Garcia-Romeu, M.L.; Ciurana J. "Cutting Tool Selection through Tool Wear, Cost, Power Consumption and Surface Roughness Analyses ." Advanced Materials Research 498 (2012): 55-60.
  • Santi Cots; Martí Casadesús "Mejorando la gestión de TI: La norma ISO/IEC 20000 ." Forum calidad: gestión de calidad, metrología y medio ambiente 228 (2012): 32-38.
  • Sereno, L.; Delgado, J.; Ciurana, J. "Customizing Food with an Additive Manufacturing Technology ." Materials Science Forum 713 (2012): 43-48.
  • Simon, A.; Karapetrovic, S.; Casadesús, M. "Difficulties and Benefits of Integrated Management Systems ." Industrial Management and Data Systems 112 (2012): 828-846.
  • Simon, A.; Karapetrovic, S.; Casadesús, M. "Evolution of integrated management systems in Spanish firms ." Journal of Cleaner Production 23 (2012): 8-19.
  • Soria, M.; Bagudanch, I.; Garcia-Romeu, M.L.; Perez-Santiago, R.; Masqué, S.; Ribatallada, J.; Guillaumet, J.; Ardanuy, J.; Poch, R. "Numerical approach of ROBOSTAMP: a new metal forming technology based on the use of industrial robots.." Steel Research International (2012): 311-314.
  • Teixidor, D.; Ciurana, J.; Thepsonthi, T.; Ozel, T. "Nanosecond Pulsed Laser Micro-Machining of PMMA-based Microfluidic Channels ." Journal of Manufacturing Processes 14 (2012): 435-442.
  • Teixidor, D.; Ferrer, I.; Ciurana J. "Experimental Analysis of Laser Micro-Machining Process Parameters." Materials Science Forum 713 (2012): 67-73.
  • Villar, J.R., Gonzalez, S., Sedano, J., Corchado, E., Puigpinos, L., Ciurana, J. "Meta-heuristic improvements applied for steel sheet incremental cold shaping." Memetic computing 4 (2012): 249-261.
  • Alberti, M., Ciurana, J., Rodríguez, C.A., Ozel, T. "Design of A Decision Support System for Machine Tool Selection Based on Machine Characteristics and Performance Tests." Journal of Intelligent Manufacturing 22 (2011): 263-277.
  • Bagudanch, I.; Pérez-Santiago, R.; García-Romeu, M.L. "Tool path strategies for single point incremental forming ." Key Engineering Materials 473 (2011): 905-912.
  • Bartolo, P., Domingos, M., Gloria, A., Ciurana, J. "BioCell Printing: Integrated automated assembly system for tissue engineering”. ." CIRP Annals - Manufacturing Technology 60 (2011): 271-274.
  • Bernardo, M., Casadesus, M., Karapetrovic, S. "Are methods used to integrate standardized management systems a conditioning factor of the level of integration? An empirical study ." International Journal for Quality Research 5 (2011): 213-222.
  • Bernardo, M.; Casadesús, M.; Karapetrovic, S.; Heras, I. "Relationships between the integration of audits and management systems: an empirical study ." The TQM Journal 23 (2011): 659-672.
  • Blanch, R., Pellicer, N., G.-Romeu, M.L., Ciurana, J. "Machining processes time calculating tool integrated in computer aided process planning (CAPP) for small and medium enterprises (SMEs)." International Journal of Computer Integrated Manufacturing 24 (2011): 40-52.
  • Brecher, C; Quintana, G; Rudolf, T; Ciurana, J. "Use of NC kernel data for surface roughness monitoring in milling operations ." International Journal of Advanced Manufacturing Technology 53 (2011): 953-962.
  • Bustillo, A., Díez-Pastor, J.-F., Quintana, G., García-Osorio, C. "Avoiding neural network fine tuning by using ensemble learning: Application to ball-end milling operations." International Journal of Advanced Manufacturing Technology 57 (2011): 521-532.
  • Casadesús, M.; Karapetrovic, S.; Heras, I. "Synergies in Standardized Management Systems: Some empirical evidence ." The TQM Journal 23 (2011): 73-86.
  • Delgado, J.; Ciurana, J.; Serenó, L. "Comparison of forming manufacturing processes and selective laser melting technology based on the mechanical properties of products." Virtual and Physical Prototyping 6 (2011): 167-178.
  • Heras, I.; Casadesus, M.; Marimon, F. "Impact of ISO 9001 standard and the EFQM model: The view of the assessors ." Total Quality Management and Business Excellence 22 (2011): 197-218.
  • Heras, I.; Marimon, F.; Casadesús, M. "Impact of quality improvement tools on the performance of firms using different quality management systems ." Innovar: revista de ciencias administrativas y sociales 21 (2011): 161-173.
  • Karapetrovic, S.; Casadesús, M.; Heras, I. "Augmentation of standardized quality management systems: an empirical view." International Journal of Total Quality Management & Excellence 39 (2011): 1-4.
  • Marimon, F.; Pentji, L.H.; Casadesús, M. "Impact of Service Recovery on Customer Loyalty: A Study of e-Banking in Spain ." Review of International Comparative Management = Revista de Management Comparat Internacional 12 (2011): 49-60.
  • Mir, M.; Casadesús, M. "Normas para la gestión de la innovación. Un análisis comparativo." Dyna : ingeniería e indústria 86 (2011): 49-58.
  • Mir, M.; Casadesús, M. "Standardised innovation management systems: a case study of the Spanish Standard UNE 166002:2006 ." Innovar: revista de ciencias administrativas y sociales 21 (2011): 171-187.
  • Pellicer, N.; Ciurana, J.; Delgado, J. "Tool electrode geometry and process parameters influence on different feature geometry and surface quality in electrical discharge machining of AISI H13 steel ." Journal of Intelligent Manufacturing 22 (2011): 575-584.
  • Pentji, L.H.; Marimon, F.; Casadesús, M. "Customer's loyalty and perception of ISO 9001 in online banking ." Industrial Management and Data Systems 111 (2011): 1194-1213.
  • Pérez, R., Ciurana, J., Riba, C., Molina, A., Romero, D., Hernández, L.W., Quesada, A.M. "Concurrent Conceptual Evaluation of Tolerances´ Synthesis in Mechanical Design." Concurrent Engineering-Research and Applications 19 (2011): 175-186.
  • Pérez-Santiago, R.; Bagudanch, I.; García-Romeu, M.L. "Force modelling in single point incremental forming of variable wall angle components ." Key Engineering Materials 473 (2011): 833-840.
  • Petnji Yaya L. H., Marimon F., Casadesus M. "Investigating discrepancies between e-services implementing or not ISO 9001: customer's outlook in the backdrop of e-services in Catalonia (Spain) ." International Journal for Quality Research 5 (2011): 297-308.
  • Quintana, G., Campa, F.X., Ciurana, J., Lopez de Lacalle, L.N. "Productivity improvement through chatter-free milling in workshops." Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture 225 (2011): 1163-1174.
  • Quintana, G., Ciurana, J. "Cost estimation support tool for vertical high speed machines based on product characteristics and productivity requirements." International Journal of Production Economics 134 (2011): 188-195.
  • Quintana, G., Ciurana, J., "Cost estimation support tool for vertical high speed machines." International Journal of Production Economics 134 (2011): 188-195.
  • Quintana, G., Rudolf, T., Ciurana, J., Brecher, C., "Using kernel data in machine tools for the indirect evaluation of surface roughness in vertical milling operations." Robotics and Computer-Integrated Manufacturing 27 (2011): 1011-1018.
  • Quintana, G.; Ciurana, J. "Chatter in machining processes: a review." International Journal of Machine Tools and Manufacture 51 (2011): 363-376.
  • Quintana, G.; Ciurana, J.; Ribatallada, J. "Modelling power consumption in ball-end milling operations." Materials and Manufacturing Processes 26 (2011): 746-756.
  • Quintana, G.; Ciurana, J.; Teixidor, D.; Ferrer, I. "Experimental introduction to forced and self-excited vibrations in milling processes and identification of stability lobes diagrams." Materials Science Forum 692 (2011): 24-32.
  • Quintana, G.; Rudolf, T.; Ciurana, J.; Brecher, C. "Surface roughness prediction through internal kernel information and external accelerometers using artificial neural networks." Journal of Mechanical Science And Technology 25 (2011): 2877-2886.
  • Simon, A; Bernardo, M; Karapetrovic, S; Casadesus, M. "Integration of standarized environmental and quality management systems audits ." Journal of Cleaner Production 19 (2011): 2057-2065.
  • Vazquez, E., Ciurana, J., Rodríguez, C.A., Thepsonthi, T., Ozel, T. "Swarm intelligent selection and optimization of machining system parameters for micro-channel fabrication in medical devices." Materials and Manufacturing Processes 26 (2011): 403-414.
  • Bernardo, M.; Casadesus, M.; Karapetrovic, S.; Heras, I. "An empirical study of the integration of management system audits ." Journal of Cleaner Production 18 (2010): 486-495.
  • Casadesús, M; Marimon, F.; Alonso, M. "The future of standardised quality management in tourism: Evidence from the Spanish tourist sector ." Service Industries Journal 30 (2010): 2457-2474.
  • Ferrer, I.; Rios, J.; Ciurana, J.; Garcia-Romeu, M.L. "Methodology for capturing and formalizing DFM Knowledge ." Robotics and Computer-Integrated Manufacturing 26 (2010): 420-429.
  • G.-Romeu, M.L.; Mayugo, J.A.; Ciurana, J. "Determining Curvature of Air Bent Parts by Digital Image Processing ." International Journal of Material Forming, 3 (2010): 105-108.
  • Garcia-Romeu, M.L., Mayugo, J., Ciurana, J. "Determining curvature of air bended parts by digital image processing." Proceedings of ESAFORM 2010 the 13th international conference on Material Forming 1 (2010): 11-.
  • Karapetrovic, S.; Casadesús, M.; Heras, I. "Empirical analysis of integration within the Standards-Based integrated management systems ." International Journal for Quality Research 4 (2010): 25-35.
  • Karapetrovic, S.; Casadesus, M.; Heras, I. "What happened to the ISO 9000 lustre? An eight-year study ." Total Quality Management and Business Excellence 21 (2010): 245-267.
  • Llach Pagès, J., Bikfalvi, A., de Castro Vila, R. "The use and impact of technology in factory environments: evidence from a survey of manufacturing industry in Spain ." International Journal of Advanced Manufacturing Technology 47 (2010): 181-190.
  • Llach, J.; Casadesus, M.; Marimon, F. "Relationship between Quality Management Systems and organisational innovations ." Human Factors and Ergonomics in Manufacturing and Service Industries 21 (2010): 52-66.
  • Marimon, F.; Casadesus, M.; Heras, I. "Certification intensity level of the leading nations in ISO 9000 and ISO 14000 standards ." International Journal of Quality and Reliability Management 27 (2010): 1002-1020.
  • Míguez, S., Vallicrosa, G., Ciurana, J., "Modelling manufacturing processes, a comparison between multiple regression analysis and the neural networks approach." International Journal of Mechatronics and Manufacturing Systems (IJMMS) 3 (2010): 405-424.
  • Pérez, C.; De Castro, R.; Simons, D.; Giménez Leal, G. "Development of lean supply chains: a case study of the Catalan pork sector ." Supply Chain Management-An International Journal 15 (2010): 55-68.
  • Providência, B., Ciurana J. "Interface tool for human communication to integrate psychophysics inputs with rapid manufacturing technologies." International Journal of Computer Integrated Manufacturing 23 (2010): 777-790.
  • Quintana, G., Ciurana, J., Ribatallada, J. "Surface Roughness Generation and Material Removal Rate in Ball End Milling Operations ." Materials and Manufacturing Processes 25 (2010): 389-398.

Quintana, G., Gomez, X., Delgado, J., Ciurana, J., "Influence of cutting parameters on cycle time, surface roughness, dimensional error and cutting forces in milling operations on aluminium 6082 sculptured surface geometry." International Journal of Machining and Machinability of Materials 8 (2010): 339-355

Choose which types of cookies you accept which the University of Girona can store in your browser.

Those that are essential for enabling your connection. There is no option for disabling them, as they are necessary for the functioning of the website.

These enable your options to be remembered (for example language or region you are accessing from), to provide you with advanced services.

They provide statistical information and enable improved services. We use Google Analytics cookies which you can deactivate by installing this plugin.

To offer advertising contents relating to the interests of users, either directly, or through third parties (“adservers”). These must be activated if you wish to see the YouTube videos uploaded to the University of Girona’s website.