X. Cahís; A. Catalan; A. Benavent-Climent; D. Trias "A new Coplanar Dual Core Buckling-Restrained Brace." Journal Of Building Engineering 70 (2023): -. Mostafa Barzegar; Josep Costa; Daniel Trias; Jose Manuel Guerrero; Claudio Lopes; Carlos Gonzalez "Analysis of Stress Intensity Factor of a Fibre Embedded in a Matrix." Journal of Composites Science 7 (2023): 1-14. A.Sasikumar; J.Costa; D.Trias; J.Llobet; I.R.Cózar; A.Turon; P.Linde "A virtual testing based search for optimum compression after impact strength in thin laminates using ply-thickness hybridization and unsymmetrical designs." Composites Science and Technology 196 (2020): -. A. Sasikumar; S.M. Garciá-Rodríguez; J.J. Arbeláez; D. Trias; J. Costa "On how unsymmetrical laminate designs with tailored ply clusters affect compression after impact strength compared to symmetric baseline." Composite Structures 238 (2020): -. A. Sasikumar; D. Trias; J. Costa; N. Blanco; J. Orr; P. Linde "Impact and compression after impact response in thin laminates of spread-tow woven and non-crimp fabrics." Composite Structures 215 (2019): 432-445. A. Sasikumar, D. Trias, J. Costa, V. Singery, P. Linde "Mitigating the weak impact response of thin-ply based thin laminates through an unsymmetrical laminate design incorporating intermediate grade plies." Composite Structures 220 (2019): 93-104. A. Sasikumar, D. Trias, J. Costa, N. Blanco, J. Orr, P. Linde "Effect of ply thickness and ply level hybridization on the compression after impact strength of thin laminates." Composites. Part A, Applied science and manufacturing 121 (2019): 232-243. A. Sasikumar; J. Costa; D. Trias; E.V. González; S.M. García-Rodríguez; P. Maimí "Unsymmetrical stacking sequences as a novel approach to tailor damage resistance under out-of-plane impact loading." Composites Science and Technology 173 (2019): 125-135. S.M. García-Rodríguez; J. Costa; A. Bardera; V. Singery; D. Trias "A 3D tomographic investigation to elucidate the low-velocity impact resistance, tolerance and damage sequence of thin non-crimp fabric laminates: effect of ply-thickness." Composites. Part A, Applied science and manufacturing 113 (2018): 53-65. Santiago M. García-Rodríguez; Anton Bardera; Aravind Sasikumar; Marc Ruiz; Vicky Singery; Imma Boada; Daniel Trias; Josep Costa "Effect of ply-thickness on the impact response of interleaved thin-ply non-crimp-fabric laminates: X-ray tomography investigation." Materiales compuestos: revista de la Asociación Española de Materiales Compuestos 1 (2017): 57-64. Adrián Ortega; Pere Maimí, Emilio V. González: Daniel Trias. "Specimen geometry and specimen size dependence of the R-curve and the size effect law from a cohesive model point of view." International Journal of Fracture 205 (2017): 239-254. Trias Mansilla, Daniel; Maimí Vert, Pere; Blanco Villaverde, Norbert "Maximization of the fundamental frequency of plates and cylinders." Composite Structures 156 (2016): 375-384. Wagih, A.; Maimí Vert, Pere; Blanco Villaverde, Norbert; Trias Mansilla, Daniel "Predictive model for the spherical indentation of composite laminates with finite thickness." Composite Structures 153 (2016): 468-477. Adrián Ortega; Pere Maimí; Emilio Vicente Gonz ález; Daniel Trias; "Characterization of the translaminar fracture cohesive law." Composites. Part A, Applied science and manufacturing 91 (2016): 501-509. Marín, L.; González, E.V.; Maimí, P.; Trias, D.; Camanho, P.P. "Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms." Composites Science and Technology 122 (2016): 130-139. Badalló, P.; Trias, D.; Lidngaard, E. "Damage tolerance optimization of composite stringer run-out under tensile load." Composite Structures 133 (2015): 98-104. N. Blanco; D. Trias; S.T. Pinho; P. Robinson "Intralaminar fracture toughness characterisation of woven composite laminates. Part II: Experimental characterisation." Engineering Fracture Mechanics 131 (2014): 361-370. N. Blanco; D. Trias; S.T. Pinho; P. Robinson "Intralaminar fracture toughness characterisation of woven composite laminates. Part I: Design and analysis of a compact tension (CT) specimen." Engineering Fracture Mechanics 131 (2014): 349-370. P. Badalló; D. Trias; L. Marín; J.A. Mayugo "A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads." Composites. Part B, Engineering 47 (2013): 130-136. Marín Hernández, Lorena; Trias Mansilla, Daniel; Badalló i Cañellas, Pere; Mayugo Majó, Joan Andreu "Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithms." Composite Structures 94 (2012): 3321-3326. P. Maimí; D. Trias; E.V. González; J. Renart "Nominal strength of quasi-brittle open hole specimens." Composites Science and Technology 72 (2012): 1203-1208. Martínez, V.; Güemes, A.; Trias, D.; Blanco, N. "Numerical and Experimental Analysis of Stresses and Failure in T-Bolt joints." Composite Structures 93 (2011): 2636-2645. Maimí, P.; Turon, A.; Trias, D. "Crack propagation in quasi-brittle two-dimensional isotropic lattices." Engineering Fracture Mechanics 78 (2011): 60-70. Trias, D.; Garcia, R.; Costa, J.; Blanco, N.; Hurtado, J.E. "Quality control of CFRP by means of digital image processing and statistical point pattern analysis." Composites Science and Technology 67 (2007): 2438-2446. Trias, D.; Costa, J.; Fiedler, B.; Hobbiebrunken, Th.; Hurtado, J.E. "A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element." Composites Science and Technology 66 (2006): 1766-1777. Trias, D.; Costa, J.; Turon, A.; Hurtado, J.E. "Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers." Acta Materialia 54 (2006): 3471-3484. Trias, D.; Costa, J.; Mayugo, J.A. ; Hurtado, J.E. "Random models versus periodic models for fibre reinforced composites." Computational Materials Science 38 (2006): 316-324. Blanco, N.; Gamstedt, E.K.; Costa, J.; Trias, D. "Analysis of the Mixed-Mode End Load Split delamination test." Composite Structures 76 (2006): 14-20. Costa, J.; Turon, A.; Trias, D.; Blanco, N.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue." Composites Science and Technology 65 (2005): 2269-2275. Turon, A.; Costa, J.; Maimí, P.; Trias, D.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation." Composites Science and Technology 65 (2005): 2039-2048.
Alex Fernández; Norbert Blanco; Daniel Trias "Assessment of the interlaminar damage generated by low-velocity impact events in 3D-printed composite materials using active infrared thermography." Materiales compuestos: revista de la Asociación Española de Materiales Compuestos Volume 07 (2023): -.