G.Guillamet, J.Costa, A.Turon, J.A.Mayugo "In search of the quasi-isotropic laminate with optimal delamination resistance under off-axis loads." Journal of Reinforced Plastics and Composites (2023): -. Breite, C; Melnikov, Arsen; Turon, Albert; de Morais, Alfredo B.; Le Bourlot, Christophe; Maire, Eric; Schöberl, Erich; Otero, Fermin; Mesquita, Francisco; Sinclair, Ian; Costa, Josep; Mayugo, Joan A.; Guerrero, José M.; Gorb "Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites." Composite Structures 279 (2021): -. C. Breite; A. Melnikov; A. Turon; A.B. de Morais; F. Otero; F. Mesquita; J. Costa; J. A. Mayugo; J.M. Guerrero; L. Gorbatikh; L. N. McCartney; M. Hajikazemi; P. P. Camanho; R. P. Tavares; S. V. Lomov; S. Pimenta; W. Van Paepe "Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites." Composites Science and Technology 202 (2020): -. Jose M. Guerrero; Joan A. Mayugo; Josep Costa; Albert Turon "Size effects in hybrid unidirectional polymer composites under longitudinal tension: A micromechanical investigation." Composites. Part A, Applied science and manufacturing 140 (2020): -. Jose M.Guerrero; Joan A. Mayugo; Josep Costa; Albert Turon "Failure of hybrid composites under longitudinal tension: influence of dynamic effects and thermal residual stresses." Composite Structures 233 (2020): -. Adrià Quintanas-Corominas; José Reinoso; Eva Casoni; Albert Turon; Joan Andreu Mayugo "A phase field approach to simulate intralaminar and translaminar fracture in long fiber composite materials." Composite Structures 220 (2019): 899-911. Jose M. Guerrero; Rodrigo P. Tavares; Fermin Otero; Joan A. Mayugo; Josep Costa; Albert Turon; Pedro P. Camanho "An analytical model to predict stress fields around broken fibres and their effect on the longitudinal failure of hybrid composites." Composite Structures 211 (2018): 564-576. A.Soto; E.V. González; P. Maimí; J.A.Mayugo; P.R.Pasquali; P.P.Camanho "A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels." Composite Structures 204 (2018): 223-238. J. Renart; S. Budhe; L. Carreras; J.A. Mayugo; J. Costa "A new testing device to simultaneously measure the mode I fatigue delamination behavior of a batch of specimens." International Journal of Fatigue 116 (2018): 275-283. Adrià Quintanas-Corominas; Pere Maimí; Eva Casoni; Albert Turon; Joan Andreu Mayugo; Gerard Guillamet; Mariano Vázquez "A 3D transversally isotropic constitutive model for advanced composites implemented in a high performance computing code." European Journal of Mechanics A-Solids 71 (2018): 278-291. Rodrigo P. Tavares; Jose M. Guerrero; Fermin Otero; Albert Turon; Joan A. Mayugo; Josep Costa; Pedro P. Camanho "Effects of local stress fields around broken fibres on the longitudinal failure of composite materials." International Journal of Solids and Structures 156-157 (2018): 294-305. S.M. García-Rodríguez; J. Costa; V. Singery; I. Boada; J.A. Mayugo "The effect interleaving has on thin-ply non-crimp fabric laminate impact response: X-ray tomography investigation." Composites. Part A, Applied science and manufacturing 107 (2018): 409-420. Jose Manuel Guerrero; Joan Andreu Mayugo; Josep Costa; Albert Turon "A 3D Progressive Failure Model for predicting pseudo-ductility in hybrid unidirectional composite materials under fibre tensile loading." Composites. Part A, Applied science and manufacturing 107 (2018): 579-591. J.D.Vanegas-Jaramillo, A.Turon, J.Costa, L.J.Cruz, J.A.Mayugo "Analytical model for predicting the tensile strength of unidirectional composites based on the density of fiber breaks." Composites. Part B, Engineering 141 (2017): 84-91. Yi Liv, G. Guillamet, J. Costa, E.V. González, L. Marín, J.A. Mayugo "Experimental study into compression after impact strength of laminates with conventional and nonconventional ply orientations." Composites. Part B, Engineering 126 (2017): 133-142. J. Llobet; P. Maimi; J. A. Mayugo; Y. Essa; F. Martin de la Escalera "A Fatigue damage and residual strength model for unidirectional carbon/epoxy composites under on-axis tension-tension loadings." International Journal of Fatigue 103 (2017): 508-515. Falcó Salcines, Olben; Lopes, Cláudio Saúl; Naya, F.; Sket, F.; Maimí Vert, Pere; Mayugo Majó, Joan Andreu "Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites." Composites. Part A, Applied science and manufacturing 93 (2017): 53-71. Renart, J.; Vicens, J.; Budhe, S.; Rodríguez-Bellido, A.; Comas, J.; Mayugo, J.A.; Costa, J. "An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen's compliance." International Journal of Fatigue 82 (2016): 634-642. Isart Valle, Nativitat; El Said, B.; Ivanov, D.S.; Hallett, S.R.; Mayugo Majó, Joan Andreu; Blanco Villaverde, Norbert "Internal geometric modelling of 3D woven composites: A comparison between different approaches." Composite Structures 132 (2015): 1219-1230. N. Isart;J.A. Mayugo;N. Blanco;L. Ripoll;A. Sola;M. Soler "Geometric model for 3D through-thickness orthogonal interlock composites." Composite Structures 119 (2015): 787-798. T.A. Sebaey; J. Costa; P. Maimí; Y. Batista; N. Blanco; J.A. Mayugo "Measurement of the in situ transverse tensile strength of composite plies by means of the real time monitoring of microcracking." Composites. Part B, Engineering 65 (2014): 40-46. Guillamet, G., Liv, Y., Turon, A., Marín, L., González, E.V., Mayugo, J.A., Costa, J. "Design of non-conventional CFRP laminates for improved damage resistance and damage tolerance." 16th European Conference on Composite Materials, ECCM 2014 (2014): -. Falco, O.; Lopes, C.S.; Mayugo, J.A. ; Gascons, N.; Renart, J. "Effect of tow-drop gaps on the damage resistance and tolerance of Variable-Stiffness Panels." Composite Structures 116 (2014): 94-103. G. Guillamet; A. Turon; J. Costa; J. Renart; P. Linde; J.A. Mayugo "Damage occurrence at edges of Non-crimp-fabric thin-ply laminates under off-axis uniaxial loading." Composites Science and Technology 98 (2014): 44-50. Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Costa, J. "Variable-stiffness composite panels: Defect tolerance under in-plane tensile loading." Composites. Part A, Applied science and manufacturing 63 (2014): 21-31. S. Budhe, A. Rodríguez-Bellido, J. Renart, J.A. Mayugo, J. Costa "Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs." International Journal of Adhesion and Adhesives 49 (2014): 80-89. Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Turon, A.; Costa, J. "Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior." Composites. Part B, Engineering 56 (2014): 660-669. Sebaey, T.A.; Lopes, C.S.; Blanco, N.; Mayugo, J.A. ; Costa, J. "Two-pheromone ant colony optimization to design dispersed laminates for aeronautical structural applications." Advances in Engineering Software 66 (2013): 10-18. Sans, D.; Renart, J.; Costa, J.; Gascons, N.; Mayugo, J.A. "Assessment of the influence of the crack monitoring method in interlaminar fatigue tests using fiber Bragg grating sensors." Composites Science and Technology 84 (2013): 44-50. P. Badalló; D. Trias; L. Marín; J.A. Mayugo "A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads." Composites. Part B, Engineering 47 (2013): 130-136. Marín Hernández, Lorena; Trias Mansilla, Daniel; Badalló i Cañellas, Pere; Mayugo Majó, Joan Andreu "Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithms." Composite Structures 94 (2012): 3321-3326. D. Sans; S. Stutz; J. Renart; J.A. Mayugo; J. Botsis "Crack tip identification with long FBG sensors in mixed-mode delamination." Composite Structures 94 (2012): 2879-2887. González, Emilio V.; Maimí, P.; Camanho, P.P.; Turon, A.; Mayugo, J.A. "Simulation of drop-weight impact and compression after impact tests on composite laminates." Composite Structures 94 (2012): 3364-3378. Gutiérrez J.M.; Barbero, E.J.; Cairns, D.R.; Mucino, V.H.; Mayugo, J.A "Dynamic roughness and power dissipation of polymer films actuated with liquid crystal polymer inclusions." Smart Materials and Structures 21 (2012): Art. n.015003 -. Gascons,M.; Blanco,N.; Mayugo,J.A.; Matthys,K. "A strategy to support design processes for fibre reinforced thermoset composite materials." Applied Composite Materials 19 (2012): 297-314. Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part II: Evolution of crack density and delamination." Mechanics of Materials 43 (2011): 194-211. Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination." Mechanics of Materials 43 (2011): 169-185. Mayugo, J.A.; Camanho, P.P.; Maimí, P.; Dávila, C.G. "Analytical Modelling of Transverse Matrix Cracking of [±θ,90n]s Composite Laminates under Multiaxial Loading." Mechanics of Advanced Materials and Structures 17 (2010): 237-245. Maimí, P.; Mayugo, J.A.; Camanho, P.P. "A Three-dimensional Damage Model for Transversely Isotropic Composite Laminates." Journal of Composite Materials 42 (2008): 2717-2745. Maimí, P.; Camanho, P.P.; Mayugo, J.A; Dávila, C.G. "A Continuum Damage Model for Composite Laminates. Part II-Computational implementation and validation." Mechanics of Materials 39 (2007): 909-919. Maimí, P.; Camanho, P.P.; Mayugo, J.A.; Dávila, C.G. "A Continuum Damage Model for Composite Laminates. Part I-Constitutive model." Mechanics of Materials 39 (2007): 897-908. Trias, D.; Costa, J.; Mayugo, J.A. ; Hurtado, J.E. "Random models versus periodic models for fibre reinforced composites." Computational Materials Science 38 (2006): 316-324. Barbero, E.J.; J. Trovillion, J.; Mayugo, J.A.; Sikkild, K.K. "Finite element modeling of plain weave fabrics from photomicrograph measurements." Composite Structures 73 (2006): 41-52. Costa, J.; Turon, A.; Trias, D.; Blanco, N.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue." Composites Science and Technology 65 (2005): 2269-2275. Turon, A.; Costa, J.; Maimí, P.; Trias, D.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation." Composites Science and Technology 65 (2005): 2039-2048.
C. Breite; A. Melnikov; A. Turon; A.B. de Morais; C. Le Bourlot; E. Maire; E. Schöberl; F. Otero; F. Mesquita; I. Sinclair; J. Costa; J.A. Mayugo; J.M. Guerrero; L. Gorbatikh; L.N. McCartney; M. Hajikazemi; M. Mehdikhani; M.N "A synchrotron computed tomography dataset for validation of longitudinal tensile failure models based on fibre break and cluster development." Data in Brief 39 (2021): -.