Peña, L.; González, I.; Bayer R.; J.; El Mansouri, N.E.; Vilaseca, F. "Mechanical behaviour of thermo-mechanical corn stalk fibers in HDPE composites." Journal of Biobased Materials And Bioenergy (2012): -. Flandez,J.; González, I.; Bayer, J.; El Mansouri,N.E.; Vilaseca, F.; Mutjé, P. "Management of corn stalk waste as reinforcement for polypropylene injection moulded composites." Bioresources 7 (2012): 1836-1849. J.P.López; F.Vilaseca; L.Barberà; J.Bayer R.; M.A.Pèlach; P.Mutje "Processing and properties of biodegradable composites based on MATER-BI® and hemp core fibres." Resources Conservation and Recycling 59 (2012): 38-42. Girones, J.; López, J.P.; Vilaseca, F.; Bayer R., J.; Herrera-Franco, P.J.; Mutjé, P. "Biocomposites from Musa textilis and polypropylene. Evaluation of flexural properties and impact strength." Composites Science and Technology 71 (2011): 122-128. E. Franco-Marquès, J.A. Méndez, M.A. Pèlach, F. Vilaseca, J. Bayer, P. Mutjé "Influence of coupling agents in the preparation of polypropylene composites reinforced with recycled fibers." Chemical Engineering Journal 166 (2011): 1170-1178. E. Franco-Marquès, J.A. Méndez, M.A. Pèlach, F. Vilaseca, J. Bayer, P. Mutjé "Influence of coupling agents in the preparation of polypropylene composites reinforced with recycled fibers." Chemical Engineering Journal 166 (2011): 1170-1178. J. Gironès, J.P. Lopez, F. Vilaseca, J. Bayer R, P.J. Herrera-Franco, P. Mutjé "Biocomposites from Musa textilis and polypropylene: Evaluation of flexural properties and impact strength.." Composites Science and Technology 71 (2011): 122-128. M. Rodriguez, A. Rodriguez, J. Bayer R., F. Vilaseca, J. Gironès, P. Mutjé "Determination of corn stalk fibres' strength through modelling of the mechanical properties of its composites." Bioresources 5 (2010): 2535-2546. M. Rodriguez; A. Ropdriguez; J. Bayer R.; F. Vilaseca; J. Girones; P. Mutjé "Determination of Corn Stalk Fibers' Strength through Modeling of the Mechanical Properties of its Composites." Bioresources 5 (2010): 2535-2546. J. Gironès; J.P. López; F. Vilaseca, J. Bayer R.; P.J. Herrera-Franco; P. Mutjé "iocomposites from Musatextilis and polypropylene: evaluation of flexuralproperties and impactstrength." Composites Science and Technology 71 (2010): 122-128. Tartera, J.; Santelli, J.A.; Bayer Resplandis, J.; Solina, M.; Rota, J. "Detección de defectos y optimización del proceso e fabricación de piezas fundidas mediante simulación. Parte 1. Detección de defecos en la colada de una pieza de cobre." FUNDIPress (2007): 33-39.