Anar al contingut (clic a Intro)
UdG Home UdG Home
Tancar
Menú

Estudia

Dades generals

Curs acadèmic:
2023
Descripció:
Materials compostos en construcció. Propietats, durabilitat, normes i codis. Armat d'elements amb materials compostos. Reforços amb materials compostos. Disseny en estat límit últim. Disseny en servei. Estudi de casos.
Crèdits:
3

Grups

Grup A

Durada:
Semestral, 2n semestre
Professorat:
Cristina Barris Peña  / Alba Codina Le Boudal
Idioma de les classes:
Anglès (100%)

Competències

  • CB01 Posseir i comprendre coneixements que aportin una base o oportunitat de ser originals en el desenvolupament i / o aplicació d'idees, sovint en un context de recerca
  • CE02 Desenvolupar metodologies d'anàlisi, disseny i construcció d'elements estructurals emprant nous plantejaments i tecnologies.

Continguts

1. Composite materials in construction

2. Properties, durability, design codes and standards

3. Reinforcement with composite materials

4. Strengthening with composite materials

5. Ultimate limit state design

6. Serviceability limit state design

7. Case studies

Activitats

Tipus d’activitat Hores amb professor Hores sense professor Hores virtuals amb professor Total
Anàlisi / estudi de casos 15,00 24,00 0 39,00
Cerca i anàlisi d'informació 1,00 7,00 0 8,00
Resolució d'exercicis 2,00 4,00 0 6,00
Sessió expositiva 12,00 10,00 0 22,00
Total 30,00 45,00 0 75

Bibliografia

  • Bank, L. (2006). Composites for Construction. Structural Design with FRP Materials. John Wiley & Sons, Inc..
  • GangaRao, HVS (2007). Reinforced concrete design with FRP composites. CRC Press, Taylor & Francis Group.
  • Pellegrino C, Sena-Cruz J (2016). Design procedures for the use of composites in strengthening of RC structures. Springer.
  • ACI 440.1R-15 (2015). Guide for the design and construction of structural concrete reinforced with FRP. American Concrete Institute.
  • ACI 440.2R-17 (2017). Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures. American Concrete Institute.
  • CNR-DT-200 R1 (2013). Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Existing Structures. Advisory Committee on Technical Recommendations for Construction.
  • CNR-DT-203 (2006). Guide for the Design and Construction of Concrete Structures Reinforced with Fiber-Reinforced Polymer Bars. Advisory Committee on Technical Recommendations for Construction.
  • fédération internationale du béton (fib) (2019). Bulletin 90. Externally applied FRP reinforcement for concrete structures. International Federation for Structural Concrete.

Avaluació i qualificació

Activitats d'avaluació:

Descripció de l'activitat Avaluació de l'activitat % Recuperable
Practical exercices Description of the solution, discussion of the results and conclusions report. 20 No
Practical exercises Description of the solution, discussion of the results and conclusions report. 20 No
Analysis of a research paper Analysis of authors, contents, contributions and impact. Preparation of a presentation. 20 No
Case studies Description of the solution, discussion of the results and conclusions report. 40

Qualificació

FM = Final Mark
PE = Practical exercises
AP = Analysis of a research paper
CS = Case studies

FM= 0.4*PE + 0.2*AP + 0.4*CS

For a given category (i.e. PE, or CS), the student will have to present individual reports covering all the contents of the course.
The mark for each category is the mean of the marks of the individual reports.

To pass the course, an overall minimum mark of 5 is needed, and a minimum of 4.0 for each category (PE and CS).

Criteris específics de la nota «No Presentat»:
Those students that do not hang in the reports for each category in the established delivery time will take a No Show (NP) mark.

Avaluació única:
In case of unique evaluation, the student will be asked to provide a full-assignment of the global course.

Requisits mínims per aprovar:
To pass the course, an overall minimum mark of 5 is needed.

Tutoria

There will be specified weekly time frames for on-line tutorships (via GoogleMeet or any other platform approved by UdG). Electronic mail can be also used to solve questions or doubts and set tutorship appointments out of the specified times frames.

Comunicacio i interacció amb l'estudiantat

Communication with students will be via e-mail and the News forum of the course’s Moodle. Individual on-line meetings will be possible for a personalised monitoring.

Assignatures recomanades

  • Anàlisi estructural avançat
  • El mètode dels elements finits en la mecànica d'estructures

Escull quins tipus de galetes acceptes que el web de la Universitat de Girona pugui guardar en el teu navegador.

Les imprescindibles per facilitar la vostra connexió. No hi ha opció d'inhabilitar-les, atès que són les necessàries pel funcionament del lloc web.

Permeten recordar les vostres opcions (per exemple llengua o regió des de la qual accediu), per tal de proporcionar-vos serveis avançats.

Proporcionen informació estadística i permeten millorar els serveis. Utilitzem cookies de Google Analytics que podeu desactivar instal·lant-vos aquest plugin.

Per a oferir continguts publicitaris relacionats amb els interessos de l'usuari, bé directament, bé per mitjà de tercers (“adservers”). Cal activar-les si vols veure els vídeos de Youtube incrustats en el web de la Universitat de Girona.