Congreso: IX Congreso Nacional de Materiales Compuestos. Girona (ESP) 2011. Título: Prediction of resin flow advance using viscosity models including fibre bed effect in liquid composite moulding Autores: Gascons M., Blanco N., Matthys K. Congreso: 17th International Conference on Composite Materials (ICCM-17). Edinburgh (GBR) 2009. Título: Experimental investigation of through the thickness temperature gradients in thick composites during infusion process Autores: Gascons M.; Vives J.; Blanco N.; Matthys K.; Simacek P.; Advani S. Congreso: V International Conference on Science and Technology of Composite Materials (COMATCOMP). San Sebastian (ESP) 2009. Título: Simulación no-isotérmica de la infusión de resina polimérica termoestable en procesos productivos con bolsa de vacío Autores: Gascons M.; Blanco N.; Matthys K. Congreso: 13th US-Japan Conference on Composite Materials. Tokyo (JPN) 2008. Título: Optimization of flexible mould behavior on large vessels manufacturing process Autores: Gascons, M.; Blanco, N.; Matthys, K. Congreso: 6th International Conference on Manufacturing Research (ICMR08) . London (ENG) 2008. Título: Optimization of flexible mould behavoir on large vessels manufacturing process, part 2 Autores: Gascons, M.; Blanco, N.; Matthys, K. Congreso: International Conference on Textile Composites (TEXCOMP 9). Newark, Delaware (USA) 2008. Título: Mechanical and manufacturing optimization of a large vessel through simulation Autores: Gascons, M.; Blanco, N.; Matthys, K.