Aniol Bosch; Enric Casanova-Batlle; Jesús M. Rodríguez-Rego; Joaquim Ciurana; Antonio J. Guerra "Silk Fibroin Dip Coating as Drug Delivery Material for Medical Devices." Key Engineering Materials 957 (2023): 113-121. Enric Casanova-Batlle, Aniol Bosch, Antonio J. Guerra and Joaquim Ciurana "Silk Fibroin/PLA 3D Printed Composite Stent Fabricated through Direct Ink Write Technology." Key Engineering Materials (2023): -. Chausse, V., Casanova-Batlle, E., Canal, C., Ginebra, M.P., Ciurana, J., Pegueroles, M. "Solvent-cast direct-writing and electrospinning as a dual fabrication strategy for drug-elucting polymeric absorvable stents." Additive Manufacturing (2023): -. Bosch, A., Casanova-Batlle, E., Constantin, I., Rubio, C., Ciurana, J., Guerra, A. "An innovative Stereolithography 3D tubular method for ultrahin polymeric stents manufacturing: Effect of process parameters." Polymers (2023): -. EnricCasanova-Batlle; Antonio J.Guerra; JoaquimCiurana "Characterization of direct ink write pure silk fibroin based on alcohol post-treatments." Polymer Testing 116 (2022): -. Emma Polonio-Alcalá; Rut Porta; Santiago Ruiz-Martínez; Carmen Vasquez-Dongo; Joana Relat; Joaquim Bosch-Barrera; Joaquim Ciurana*; Teresa Puig* "AZ12756122, a novel fatty acid synthase inhibitor, decreases resistance features in EGFR-TKI resistant EGFR-mutated NSCLC cell models." Biomedicine & Pharmacotherapy 156 (2022): -. Emma Polonio-Alcalá†; Enric Casanova-Batlle†; Teresa Puig*; Joaquim Ciurana* "The solvent chosen for the manufacturing of electrospun polycaprolactone scaffolds influences cell behavior of lung cancer cells." Scientific Reports 12 (2022): 19440-. Angelats Lobo, D., Ginestra, P., Ceretti, E., Ciurana, J., Palomeras, S., Puig, T. "Three-dimensional hydrophobic platform for in vitro tumoroid culture." Procedia CIRP 110 (2022): 319-324. Casanova-Batlle, E., Guerra, A.J., Ciurana, J., "A novel direct ink writing manufacturing system to 3D print highly concentrated silk fibroin." Procedia CIRP 110 (2022): 232-236. Emma Polonio-Alcalá; Marc Rabionet; Santiago Ruiz-Martínez; Sònia Palomeras; Rut Porta; Carmen Vásquez-Dongo; Joaquim Bosch-Barrera; Teresa Puig*; Joaquim Ciurana*. "Polycaprolactone Electrospun Scaffolds Produce an Enrichment of Lung Cancer Stem Cells in Sensitive and Resistant EGFRm Lung Adenocarcinoma." Cancers 13 (2021): 5320-. Rabionet, M.; Polonio-Alcalá, E.; Relat, J.; Yeste, M.; Sims-Mourtada, J.; Kloxin, A.M.; Planas, M.; Feliu, L.; Ciurana, J.; Puig, T. "Fatty acid synthase as a feasible biomarker for triple negative breast cancer stem cell subpopulation cultured on electrospun scaffolds." Materials Today Bio 12 (2021): -. Emma Polonio‐Alcalá†, Sònia Palomeras†, Daniel Torres‐Oteros, Joana Relat, Marta Planas, Lidia Feliu, Joaquim Ciurana, Santiago Ruiz‐Martínez*, Teresa Puig* "Fatty Acid Synthase Inhibitor G28 Shows Anticancer Activity in EGFR Tyrosine Kinase Inhibitor Resistant Lung Adenocarcinoma Models." Cancers 12 (2020): 1283-. Guerra, A.J., Marie, C., Ceretti, E., Ciurana, J. "Real bifurcated Vascular Grafts Manufacturing for Tissue Enginering." Procedia CIRP 89 (2020): 92-97. Emma Polonio-Alcalá; Marc Rabionet; Xavier Gallardo; David Angelats; Joaquim Ciurana; Santigo Ruiz-Martínez* and Teresa Puig* "PLA Electrospun Scaffolds for Breast Cancer Stem Cell Culture and Enrichment in a Triple Negative Breast Cancer Cell Model." Polymers (2019): -. Guerra, A.J., Ciurana, J. "3D tubular printing of bioabsorbable stents: the effects of process parameters on its in-vitro degradation." 3d Printing And Additive Manufacturing 6 (2019): 50-56. Dorf, T., Ferrer, I., Ciurana, J. "The effect of weld line on tensile strength of polyphenylsulfone (PPSU) in ultrasonic micro-moulding technology." International Journal of Advanced Manufacturing Technology (2019): -. Guerra, A.J., Lammel, J., Katko, A., Kleinfehn, A., Rodriguez, C.A., Catalani, L.H., Becker, M.L., Ciurana, J., Dean, D. "Optimization of Photocrosslinkable Resin Components and 3D Printing Process Parameters." Acta Biomaterialia (2019): -. Guerra, A.J., Tejeda-Alejandre, Rodriguez, C.A., Ciurana, J. "Electrospun Tubular Scaffold for Stentening Applications: A proof of concept." Procedia Manufacturing 41 (2019): 312-319. Giro-Perafita A., Rabionet, M., Planas, M., Feliu, L., Ciurana, J., Ruiz-Martinez, S., Puig, T. "EGCG-derivative G28 shows high efficacy in reducing BCSC-enriched population in TNBC models of acquired drug resistance." Molecules (2019): -. Guerra, A.J., Ciurana, J. "Minimum Quantitiy Lubrication in Fibre Laser processing for permanent Stents Manufacturing." Procedia Manufacturing 41 (2019): 492-499. Polonio-Alcalá, E.; Rabionet, M.; Guerra, A.J.; Yeste, M.; Ciurana, J.; Puig, T. "Screening of Additive Manufactured Scaffolds Designs for Triple Negative Breast Cancer 3D Cell Culture and Stem-Like Expansion." International Journal of Molecular Sciences 19 (2018): 3148-. Guerra, A.J.; Cano, P.; Rabionet, M.; Puig, T.; Ciurana, J.* "3D-printed PCL/PLA composite stents: Towards a new solution to cardiovascular problems." Materials 11 (2018): 1-13. Rabionet, M, Polonio, E., Guerra, A.J., Martin, J., Puig, T., Ciurana, J. "Design of a scaffold parameter selection system with additive manufacturing for a biomedical cell culture." Materials 11 (2018): 1427-. Tomasz Dorf, Inés Ferrer, Joaquim Ciurana "Characterizing Ultrasonic Micro-Molding Process of Polyetheretherketone (PEEK)." International Polymer Processing 33 (2018): 442-452. Guerra, A.J.*; Cano, P.; Rabionet, M.; Puig, T.; Ciurana, J. "Effects of different sterilization processes on the properties of a novel 3D-printed polycaprolactone stent." Polymers for Advanced Technologies 29 (2018): 2327-2335. Tomasz Dorf; Katarzyna Perkowska; Magdalena Janiszewska, Inés Ferrer; Joaquim Ciurana "Effect of the main process parameters on the mechanical strength of polyphenylsulfone (PPSU) in ultrasonic micro-moulding process." Ultrasonics Sonochemistry 46 (2018): 46-58. Guerra, A.J., Ciurana, J. "3D-printed bioabsordable polycaprolactone stent effect of process parameters over its physical features." Materials & Design 137 (2018): 430-437. Bagudanch, I.; Garcia-Romeu, M.L.; Ferrer, I.; Ciurana, J. "Customized cranial implant manufactured by incremental sheet forming using a biocompatible polymer." Rapid Prototyping Journal 24 (2018): 120-129. Rabionet, Marc; Yeste, Marc; Puig, Teresa; Ciurana, Joaquim "Electrospinning PCL Scaffolds Manufacture for Three-Dimensional Breast Cancer Cell Culture." Polymers 9 (2017): 328-. Guerra, Antonio J., Joaquim Ciurana "Effect of fibre laser process on in-vitro degradation rate of a polycaprolactone stent a novel degradation study method." Polymer Degradation and Stability 142 (2017): 42-49. Rabionet, M., Puig, T., Ciurana, J. "Electrospinning parameters selection to manufacture polycaprolactone scaffolds for three-dimensional breast cancer cell culture and enrichment." Procedia CIRP 65 (2017): 267-272. Maudes, J., Bustillo, A., Guerra, A.J., Ciurana, J. "Random Forest ensemble prediction of stent dimensions in microfabrication processes." International Journal of Advanced Manufacturing Technology 91 (2017): 879-893. Guerra , Antonio J; Farjas, Jordi; Ciurana Joaquim "Fibre laser cutting of polycaprolactone sheet for stents manufacturing: A feasibility study." Optics and Laser Technology 95 (2017): 113-123. Domingos, M., Gloria, A., Coehlo, J., Bartolo, J., Ciurana J., "Three-dimensional printed bone scaffolds: The role of nano/micro Hydroxyapatite particles on the adhesion and differentiation of human mesenchymal stem cells." Proceedings Of The Institution Of Mechanical Engineers Part H-Journal Of Engineering In Medicine 231 (2017): 555-564. Rodriguez, J.J., Quintana, G., Bustillo, A., Ciurana, J. "A decision-making tool based on decision trees for roughness prediction in face milling." International Journal of Computer Integrated Manufacturing 30 (2017): 943-957. Heredia, U., Vázquez, E., Ferrer, I., Ciurana, J. "Manufacturing of Thin-Wall Plates by Ultrasonic Microinjection Moulding." Procedia CIRP 13 (2017): 251-258. Guerra, A.J.; San, J.; Ciurana, J. "Fabrication of PCL/PLA Composite Tube for Stent Manufacturing." Procedia CIRP 65 (2017): 231-235. Guerra, A.J., Ciurana, J. "Fiber laser cutting of PCL, PLA, and PCL - PLA tubes for Stents manufacturing." Procedia CIRP 13 (2017): 190-196. Ciurana, J., Rodríguez, C.A. "Trends in Nanomaterials and Processing for Drug Delivery of Polyphenols in the Treatment of Cancer and Other Therapies." Current Drug Targets 18 (2017): 135-146. Ferrer, I., Grabalosa, J., Salvador, A., Elias, A., Ciurana, J. "New method for medical devices design and manufacture: Case study - Scapholunate implant." Advances In Mechanical Engineering 8 (2016): 1-11. Castellano, J.; Ribera, A.; Ciurana, J. "Integrated system approach to evaluate social, environmental and economics impacts of buildings for users of housings." Energy and Buildings 123 (2016): 106-118. Palomeras, Sònia; Rabionet Díaz, Marc; Ferrer Real, Inés; Sarrats Carbó, Ariadna; Garcia-Romeu, Maria Luisa; Puig i Miquel, Teresa; Ciurana, Quim de "Breast Cancer Stem Cell Culture and Enrichment Using Poly(ε-Caprolactone) Scaffolds." Molecules 21 (2016): 537-. Iglesias A., Munoa, J., Rodríguez, C., Ciurana, J., Dombovari, Z. "FRF Estimation through Sweep Milling Force Excitation (SMFE)." Procedia CIRP 46 (2016): 504-507. Giro-Perafita, A., Rabionet, M., Puig, T., Ciurana, J. "Optimization of Poli(ɛ-caprolactone) scaffolds suitable for 3D cancer cell culture." Procedia CIRP 49 (2016): 61-66. Iglesias A., Munoa, J., Ciurana, J., Dombovari, Z., Stepan, G. "Analytical expressions for chatter analysis in milling operations with one dominant mode." Journal of Sound and Vibration 375 (2016): 403-421. Grabalosa, J.; Ferrer, I.; Elias, A.; Ciurana, J. "Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding." Materials & Design 98 (2016): 20-30. Castellano, J., Castellano, D., Ribera, A., Ciurana, J. "Developing a simplified methodology to calculate CO2/m2 emissions per year in the use phase of newly-built, single-family houses." Energy and Buildings 109 (2015): 90-107. Bagudanch, I.; Garcia-Romeu, M.L.; Centeno, G.; Elias-Zúñiga, A.; Ciurana, J. "Forming force and temperature effects on single point incrementalforming of polyvinylchloride." Journal of Materials Processing Technology 219 (2015): 221-229. Vázquez, E.; Gomar, J.; Ciurana, J.; Rodríguez, C. "Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V." Journal of Cleaner Production 87 (2015): 906-913. E. Vázquez; J. Gomar; J. Ciurana; C. Rodríguez "Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes." International Journal of Advanced Manufacturing Technology 76 (2015): 219-228. Freitas, M.S., Sereno, L., Silveira, Z., Silva, J.V.L., Ciurana J. "Thermal model for curing implantable silicone in the moulding process applied to tracheal stents." Applied Thermal Engineering 75 (2015): 1001-1010. Monroy, K., Pupo, Y., Sereno, L., Ciurana, J. "Spectrum Transmission Measurement of a Fiber Laser Beam in Polymethyl Metacrylate for Laser Sintering Processing." Procedia Engineering 132 (2015): 94-101. Negre, P., Grabalosa, J., Ferrer, I., Ciurana, J., Elías-Zúñiga, A., Rivillas F. "Study of the Ultrasonic Molding Process Parameters for Manufacturing Polypropylene Parts." Procedia Engineering 132 (2015): 7-14. Monroy, K., Delgado, J., Sereno, L., Ciurana, J., Hendrichs, N. J. "Geometrical feature analysis of Co-Cr-Mo single tracks after Selective Laser Melting Processing." Rapid Prototyping Journal 21 (2015): 287-300. Teixidor, D; Grzenda, M; Bustillo, A; Ciurana, J. "Modeling pulsed laser micromachining of micro geometries using machine-learning techniques." Journal of Intelligent Manufacturing 26 (2015): 801-814. Pupo, Y.; Monroy, K.; Ciurana, J. "Influence of process parameters on surface quality of CoCrMo produced by Selective Laser Melting." International Journal of Advanced Manufacturing Technology 80 (2015): 985-995. Jordi Castellano, David Castellano, Albert Ribera, Joaquim Ciurana "Developement of a scale of building construction system according to CO2 emissions in the use stage of their life cycle." Building and Environment (2014): 618-627. Iglesias, A., Munoa, J., Ciurana J. "Optimization of face milling operations with structural chatter using a stability model based process planning methodology ." International Journal of Advanced Manufacturing Technology 70 (2014): 559-571. Vázquez, E., Amaro, A., Ciurana J., Rodríguez, C.A. "Process planning considerations for micromilling of mould cavities ." Precision Engineering 39 (2014): 252-260. Teixidor, D., Ciurana, J., Rodriguez, C.A. "Dross formation and process parameters analysis of fiber laser cutting of stainless steel thin sheets." International Journal of Advanced Manufacturing Technology 71 (2014): 1611-1621. Ciurana, J. "Designing, prototyping and manufacturing medical devices: an overview ." International Journal of Computer Integrated Manufacturing 27 (2014): 901-918. Monroy, K., Delgado, J., Sereno, L., Ciurana, J., Hendrichs, N. J. "Effects of Selective Laser Melting Manufacturing Process on the Properties of CoCrMo Single Tracks." Metals and Materials International 20 (2014): 873-884. Vázquez, E., Kenmoku, D., Noritomi, P., Silva, J.V.L., Ciurana J. "Computer Fluid Dynamics analysis for efficient cooling and lubrication conditions in micromilling of Ti6Al4V." Materials and Manufacturing Processes 29 (2014): 1494-1501. Santos, P., Teixidor, D., Maudes, J., Ciurana, J. "Modelling laser milling of micro-cavities for the manufacturing of DES with ensembles ." Journal of Applied Mathematics (2014): -. Melgoza, E.L., Vallicrosa, G., Sereno, L., Ciurana, J., Rodríguez, C. "Rapid tooling using 3D printing system for manufacturing of customized tracheal stent." Rapid Prototyping Journal 20 (2014): 2-12. Kemmoku, D.T.; Sereno, L; San J.; Ciurana, J. "A novel simplified 3D skull model to predict cranial fracture patterns." International Journal of Computer Integrated Manufacturing 27 (2014): 927-935. Pupo, Y., Sereno, L., Ciurana, J. "Surface quality analysis in Selective Laser Melting with CoCrMo powders." Materials Science Forum 797 (2014): 157-162. Pupo, Yurivania; Delgado Sanglas, Jordi; Serenó, Lídia; Ciurana, Quim de "Scanning space analysis in Selective Laser Melting for CoCrMo powder." Procedia Engineering 63 (2013): 370-378. Ciurana, J., Sereno, L., Vallés, E. "Selecting process parameters in RepRap additive manufacturing system for PLA scaffolds manufacture." Procedia CIRP 5 (2013): 152-157. Ciurana, J.; Hernandez L.; Delgado, J. "Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material." International Journal of Advanced Manufacturing Technology 68 (2013): 1103-1110. Monroy, K., Delgado, J., Ciurana, J. "Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process ." Procedia CIRP 63 (2013): 361-369. Teixidor, D., Thepsonti, T., Orozco, F., Ciurana, J., Rodríguez, C.A., Ozel, T. "Effect of Process Parameters in Nanosecond Pulsed Laser Micromachining of PMMA-based Microchannels." International Journal of Advanced Manufacturing Technology 67 (2013): 1651-1664. Teixidor, D., Ferrer, I., Ciurana, J., Ozel, T. "Optimization of Process Parameters for Pulsed Laser Milling of Micro-channels on AISI H13 Tool Steel." Robotics and Computer-Integrated Manufacturing 29 (2013): 209-218. Sereno, L., Ferrer, I., Soy, F., Salvador, A., Elias-Zuñiga, A., Pérez, T., Ciurana, J. "Designing and prototyping of new device for Scapholunate ligament repair." Procedia CIRP 5 (2013): 270-275. Teixidor, D., Ciurana, J., Rodriguez, C.A. "Multi-objective optimization of laser milling parameters of micro-cavities for the manufacturing of DES." Materials and Manufacturing Processes 28 (2013): 1370-1378. Domingos, M., Intranuovo, F., Russo, T., De Santis, R., Gloria, A., Ambrosio, L., Ciurana J., Bartolo, P. "The first systematic analysis of 3D rapid prototyped poly(ε-caprolactone) scaffolds manufactured through BioCell Printing: the effect of pore size and geometry on compressive mechanical behavior and in vitro hMSC viability." Biofabrication 5 (2013): 045004-. Teixidor, D., Quintana, G., Ciurana, J. "Experimental introduction to surface roughness parameters measurement." Materials Science Forum 759 (2013): 63-71. Quintana, G; Garcia-Romeu, M.L.; Ciurana J. "Cutting Tool Selection through Tool Wear, Cost, Power Consumption and Surface Roughness Analyses ." Advanced Materials Research 498 (2012): 55-60. J. Gomar; A. Amaro; E. Vázquez; J. Ciurana; C. Rodriguez "Experimental analysis of process parameters to manufacture micro-cavities by micromilling." Advanced Materials Research SPECIAL ISSUE: Advances in Materials Processing Technologies 498 (2012): 91-96. Melgoza, E.L., Sereno, L., Rosell, A., Ciurana, J. "Integrated parameterized tool for designing customized tracheal stent ." Computer Aided Design Journal 44 (2012): 1173-1181. Sereno, L.; Delgado, J.; Ciurana, J. "Customizing Food with an Additive Manufacturing Technology." Materials Science Forum 713 (2012): 43-48. Delgado, J.; Ciurana, J.; Rodríguez, C.A. "Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials." International Journal of Advanced Manufacturing Technology 60 (2012): 601-610. Villar, J.R., Gonzalez, S., Sedano, J., Corchado, E., Puigpinos, L., Ciurana, J. "Meta-heuristic improvements applied for steel sheet incremental cold shaping." Memetic computing 4 (2012): 249-261. Teixidor, D.; Ciurana, J.; Thepsonthi, T.; Ozel, T. "Nanosecond Pulsed Laser Micro-Machining of PMMA-based Microfluidic Channels ." Journal of Manufacturing Processes 14 (2012): 435-442. Teixidor, D.; Ferrer, I.; Ciurana J. "Experimental Analysis of Laser Micro-Machining Process Parameters." Materials Science Forum 713 (2012): 67-73. Elisa Vázquez; Xavier Gómez; Joaquim Ciurana "An experimental analysis of process parameters to manufacture by milling micro-channels in biomaterials." International Journal of Mechatronics and Manufacturing Systems (IJMMS) 5 (2012): 46-65. Delgado, J.; Ciurana, J.; "Mechanical characterization study of metal material properties in additive layer processes." International Journal of Mechatronics and Manufacturing Systems (IJMMS) 5 (2012): 189-213. Grzenda, M.; Bustillo, A.; Quintana, G.; Ciurana, J., "Improvement of surface roughness models for face milling operations through dimensionality reduction." International Journal of Computer Integrated Manufacturing 19 (2012): 179-197. Bartolo, P. J., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K.P., Mitsuishi, M., Ciurana, J., Leu, M. "Biomedical production of implants by additive electro-chemical and physical processes." CIRP Annals - Manufacturing Technology 61 (2012): 635-655. Quintana, G., Bustillo, A., Ciurana, J. "Prediction, monitoring and control of surface roughness in high-torque milling machine operations." International Journal of Computer Integrated Manufacturing 25 (2012): 1129-1138. Quintana, G., Campa, F.X., Ciurana, J., Lopez de Lacalle, L.N. "Productivity improvement through chatter-free milling in workshops." Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture 225 (2011): 1163-1174. Vazquez, E., Ciurana, J., Rodríguez, C.A., Thepsonthi, T., Ozel, T. "Swarm intelligent selection and optimization of machining system parameters for micro-channel fabrication in medical devices." Materials and Manufacturing Processes 26 (2011): 403-414. Quintana, G.; Ciurana, J. "Chatter in machining processes: a review." International Journal of Machine Tools and Manufacture 51 (2011): 363-376. Quintana, G., Rudolf, T., Ciurana, J., Brecher, C., "Using kernel data in machine tools for the indirect evaluation of surface roughness in vertical milling operations." Robotics and Computer-Integrated Manufacturing 27 (2011): 1011-1018. Alberti, M., Ciurana, J., Rodríguez, C.A., Ozel, T. "Design of A Decision Support System for Machine Tool Selection Based on Machine Characteristics and Performance Tests." Journal of Intelligent Manufacturing 22 (2011): 263-277. Pérez, R., Ciurana, J., Riba, C., Molina, A., Romero, D., Hernández, L.W., Quesada, A.M. "Concurrent Conceptual Evaluation of Tolerances´ Synthesis in Mechanical Design." Concurrent Engineering-Research and Applications 19 (2011): 175-186. Bartolo, P., Domingos, M., Gloria, A., Ciurana, J. "BioCell Printing: Integrated automated assembly system for tissue engineering”. ." CIRP Annals - Manufacturing Technology 60 (2011): 271-274. Quintana, G.; Ciurana, J.; Teixidor, D.; Ferrer, I. "Experimental introduction to forced and self-excited vibrations in milling processes and identification of stability lobes diagrams." Materials Science Forum 692 (2011): 24-32. Quintana, G.; Rudolf, T.; Ciurana, J.; Brecher, C. "Surface roughness prediction through internal kernel information and external accelerometers using artificial neural networks." Journal of Mechanical Science And Technology 25 (2011): 2877-2886. Quintana, G., Ciurana, J., "Cost estimation support tool for vertical high speed machines." International Journal of Production Economics 134 (2011): 188-195. Quintana, G.; Ciurana, J.; Ribatallada, J. "Modelling power consumption in ball-end milling operations." Materials and Manufacturing Processes 26 (2011): 746-756. Blanch, R., Pellicer, N., G.-Romeu, M.L., Ciurana, J. "Machining processes time calculating tool integrated in computer aided process planning (CAPP) for small and medium enterprises (SMEs)." International Journal of Computer Integrated Manufacturing 24 (2011): 40-52. Delgado, J.; Ciurana, J.; Serenó, L. "Comparison of forming manufacturing processes and selective laser melting technology based on the mechanical properties of products." Virtual And Physical Prototyping 6 (2011): 167-178. Brecher, C; Quintana, G; Rudolf, T; Ciurana, J. "Use of NC kernel data for surface roughness monitoring in milling operations." International Journal of Advanced Manufacturing Technology 53 (2011): 953-962. Pellicer, N.; Ciurana, J.; Delgado, J. "Tool electrode geometry and process parameters influence on different feature geometry and surface quality in electrical discharge machining of AISI H13 steel." Journal of Intelligent Manufacturing 22 (2011): 575-584. Ferrer, I.; Rios, J.; Ciurana, J.; Garcia-Romeu, M.L. "Methodology for capturing and formalizing DFM Knowledge." Robotics and Computer-Integrated Manufacturing 26 (2010): 420-429. Vàzquez, E.; Teixidor, D.; Ciurana J., "Evaluación de tecnologías de fabricación para la producción de micro-canales." Proceedings 18 INVEMA Congreso de Máquinas Herramientas y Tecnologías de Fabricación 1 (2010): 69-. Quintana, G., Ciurana, J., Ribatallada, J. "Surface Roughness Generation and Material Removal Rate in Ball End Milling Operations." Materials and Manufacturing Processes 25 (2010): 389-398. Quintana, G., Gomez, X., Delgado, J., Ciurana, J., "Influence of cutting parameters on cycle time, surface roughness, dimensional error and cutting forces in milling operations on aluminium 6082 sculptured surface geometry." International Journal of Machining and Machinability of Materials 8 (2010): 339-355. G.-Romeu, M.L.; Mayugo, J.A.; Ciurana, J. "Determining Curvature of Air Bent Parts by Digital Image Processing." International Journal of Material Forming, 3 (2010): 105-108. Míguez, S., Vallicrosa, G., Ciurana, J., "Modelling manufacturing processes, a comparison between multiple regression analysis and the neural networks approach." International Journal of Mechatronics and Manufacturing Systems (IJMMS) 3 (2010): 405-424. Providência, B., Ciurana J. "Interface tool for human communication to integrate psychophysics inputs with rapid manufacturing technologies." International Journal of Computer Integrated Manufacturing 23 (2010): 777-790. Vazquez, E.; Rodríguez, C.A.; Elias-Zuñiga; A., Ciurana, J. "An Experimental analysis of process parameters to manufacture metallic micro-channels by micro-milling." International Journal of Advanced Manufacturing Technology 51 (2010): 945-955. Quintana, G.; Ciurana J.; Teixidor, D.; Ferrer, I. "Introducción experimental a las vibraciones forzadas y auto-excitadas en procesos de fresado e identificación del diagrama de estabilidad." Proceedings CUIEET XVIII Congreso univesitario de innovación en las enseñanzas técnicas 1 (2010): 1-12. Garcia-Romeu, M.L., Mayugo, J., Ciurana, J. "Determining curvature of air bended parts by digital image processing." Proceedings of ESAFORM 2010 the 13th international conference on Manterial Forming 1 (2010): 11-. Pellicer, N., Ciurana, J., Özel, T. "Influence of process parameters and electrode geometry in EDM micro-machining of hardened steel." Materials and Manufacturing Processes 24 (2009): 1282-1289. Mungía, J.; Ciurana, J.; Riba, C. "A Neural Network-based model for build time estimation in selective laser sintering." Journal of Engineering Manufacture: Part B (2009): -. Quintana, G.; Ciurana, J.; Ferrer, I.; Rodríguez, C.A. "Sound mapping for identification of stability lobe diagrams in milling processes." International Journal of Machine Tools and Manufacture 49 (2009): 203-211. Lopez de Lacalle, L.N.; Arrazola, P.J.; Marcos, M.; Ciurana, J. "Mercados de hoy y de mañana." IMHE (2009): -. Ciurana, J.; Arias, G.; Ozel, T. "Neural network modelling the influence of process parameters on feature geometry and surface Quality on pulsed laser micro machining of hardened stell H13." Materials and Manufacturing Processes (2009): -. Ciurana, J.; Lopez de Lacalle, L.N.; Girot, F. "Nuevas aplicaciones, nuevas oportunidades para la fabricación." IMHE (2009): -. Quintana, G.; Garcia-Romeu, M.L.; Ciurana, J. "Surface roughness monitoring application based on artificial neural networks for ball-end milling operations." Journal of Intelligent Manufacturing 22 (2009): 607-617. Ferrer, I.; Ríos, J.; Ciurana, J. "An approach to integrate manufacturing process information in part design phases ." Journal of Materials Processing Technology 209 (2009): 2085-2091. Ciurana, J.; Garcia-Romeu, M.L.; Ferrer, I.; Casadesus, M. "A model for integrating process planning and production planning and control in machining processes ." Robotics and Computer-Integrated Manufacturing 24 (2008): 532-544. Ciurana, J.; Quintana, G.; Garcia-Romeu, M.L. "Estimating the cost of vertical high speed machining centres, a comparison between multiple regression analysis and neural networks approach." International Journal of Production Economics 115 (2008): 171-178. Ferrer, I.; Ciurana, J.; Sánchez, J.A.; Ortega, N. "Diseñar para fabricar: recetas para el éxito." IMHE (2008): 35-49. Sabater, M.; Garcia-Romeu, M.L.; Ciurana, J. "Input parameters determination for predicting ram speed and billet temperature for the first billet ." Key Engineering Materials 367 (2008): 161-168. Mungía, J.; Ciurana, J.; Riba, C. "Pursuing successful rapid manufacturing: A users' best-practices approach." Journal of Rapid Prototyping 14 (2008): 173-179. Quintana, G.; Ciurana, J.; Teixidor, D. "A new experimental methodology for identification of stability lobes diagram in milling operations." International Journal of Machine Tools and Manufacture 48 (2008): 1637-1645. Quintana, G.; Ciurana, J.; Garcia-Romeu, M.L. "Design of an application to assist in the decision about the blank in machining processes." Engineering Computations (2008): -. Riba, C.; Perez, R.; Hernandez, L.W.; Ciurana, J. "A framework for tolerance analysis in collaborative engineering mechanical design." Lecture Notes in Computer Science (2008): 58-65. Albertí, M.; Ciurana, J.; Rodríguez, C.A. "Experimental analysis of dimensional error vs. cycle time in high speed milling of aluminium alloy." International Journal of Machine Tools and Manufacture 47 (2007): 236-246. Ciurana, J.; López, L.N. "El Fresado en 5 ejes: máquinas, procesos y formación." IMHE (2007): 75-80. Flores, V.; Ortega, C.; Albertí, M.; Rodriguez, C.A.; Ciurana, J.; Elías, A. "Evaluation and modeling of productivity and dynamic capability performance machining centers." International Journal of Advanced Manufacturing Technology 33 (2007): 403-411. Garcia-Romeu, M.L.; Ciurana, J.; Ferrer, I. "Springback determination of sheet metals in an air bending process based on an experimental work." Journal of Materials Processing Technology 191 (2007): 174-177. Perez, R.; Ciurana, J.; Riba, C. "The characterization and specification of functional requirements and geometrical tolerances in design." Journal of Engineering Design 17 (2006): 311-324. Garcia-Romeu, M.L.; Ciurana, J. "Modelo de predicción del ángulo de recuperación y del radio de doblado final en el proceso de doblado al aire de chapa ." Deformación metálica 290 (2006): 60-69. Méndez Rodríguez, E.; Casadesus, M..; Ciurana, J. "GIRONACEL: A virtual tool for learning quality management." Innovations in Education and Teaching International 43 (2006): 313-324. Ciurana, J.; Ferrer, I.; Gao, J.X. "Activity model and computer aided system for defining sheet metal process planning ." Journal of Materials Processing Technology 173 (2006): 213-222. Garcia-Romeu, M.L.; Ciurana, J. "Springback and Geometry Prediction Neural Network applied to the air bending process ." Lecture Notes in Computer Science 4113 (2006): 470-475. Rodríguez, C.A.; Ciurana, J.; Elías, A. "Industry and university cooperation to enhance manufacturing education ." Journal of Manufacturing Systems 24 (2005): 277-287. Vidal, A.; Albertí, M.; Ciurana, J.; Casadesús, M. "A decission suport system for optimising the selection of parameters when planning milling operations ." International Journal of Machine Tools and Manufacture 45 (2005): 201-210. Albertí, M.; Ciurana, J.; Casadesús, M. "A System for optimising cutting parameters when planning milling operations in high speed machining ." Journal of Materials Processing Technology 168 (2005): 25-35. Ciurana, J.; Riba, R.; García-Romeu, M.L. "Computer application to aid the unidirectional functional dimensioning and tolerancing synthesis." Engineering Computations 21 (2004): 455-469. García-Romeu, M.L.; Ciurana, J. "Design and manufacturing assistance tool for drawing sheet metal parts." Lecture Notes in Computer Science 3190 (2004): 123-132. Ciurana, J.; Riba, C.; Garcia-Romeu, M.L. "Implementation of unidirectional functional dimensioning and tolerancing in CAD systems." Integrated Manufacturing Systems 14 (2003): 468-476. Ciurana, J.; Garcia-Romeu, M.L.; De Castro, R.; Albertí, M. "A system based on machined volumes to reduce the number of route sheets in process planning." Computers in Industry 51 (2003): 41-50. Ciurana, J.; Garcia-Romeu, M.L.; De Castro, R. "Optimising process planning using groups of precedence between operations based on machined volumes." Engineering Computations 20 (2003): 67-82. Giménez Leal, G. "Resum: La secuencia de toma de decisiones en la planificación de procesos asistida por computador." Per Determinar (2002): 31-31. Ciurana, J.; Riba, R. "Desarrollo de un algoritmo para la implementación de acotación funcional unidireccional en sistemas CAD." Revista Iberoamericana de Ingeniería Mecánica 4 (2000): 41-52. Ciurana, J.; Cabarrocas, J.; Mayugo, J.A.; Geuns, B. "Definición de interficies para la coordinación de proyectos de diseño y fabricación mecánico-electrónico. Aplicación práctica." Información Tecnológica 11 (2000): 185-192.
Vázquez, E.; Ciurana, J.; Lopez de la Calle, N. "Crisis o Reconversión. Una vía para mitigar: reconversión del fresado." IMHE (2009): 42-47.
Marc Rabionet, Teresa Puig, Joaquim Ciurana "Manufacture of PCL scaffolds through electrospinning technology to accommodate Triple Negative Breast Cancer cells culture." Procedia CIRP 89 (2020): 98-103. Rabionet, M.; Guerra, A.J.; Puig, T.*; Ciurana, J.* "3D-printed Tubular Scaffolds for Vascular Tissue Engineering." Procedia CIRP 68 (2018): 352-357. Guerra A.J.; Roca, A.; Joaquim Ciurana "A novel 3D additive manufacturing machine to biodegradable stents." Procedia Manufacturing 13 (2017): 718-723. Giro-Perafita, A., Palomeras, S., Polonio, E., Ciurana, J., Viñas, G., Puig, T. "Lipogenesis inhibition in triple negative breast cancer." International Journal of Molecular Medicine 40 (2017): S58-. Özel, T.; Yildiz, S.; Ciurana J. "Influence of Material Models on Serrated Chip Formation in Simulation of Machining Ti-6Al-4V Titanium Alloy." 12th CIRP Conference on Modeling of Machining Operations (2009): -. Miguez, S.; Pellicer, N.; Ciurana J. "Análisis del proceso de rectificado basado en la energía específica de corte y el consumo eléctrico." Proceedings MESIC 2009 III Manufacturing Engineering Society Internacional Conference (2009): -. Quintana, G.; Ribatallada, J.; Ciurana, J. "Surface Roughness Monitoring Application Based on Artificial Neural Networks." 12th CIRP Conference on Modeling of Machining Operations (2009): -. Quintana, G.; Teixidor, D.; Gomez, X.; Ciurana J. "Estudio del efecto de las vibraciones sobre la calidad de las piezas en el proceso de fresado de acero AISI H13." Proceedings MESIC 2009 III Manufacturing Engineering Society Internacional Conference (2009): -. Vallicrosa, G.; Tauler, F.; Ciurana J. "Estudio de viabilidad de fabricación de herramientas esbeltas para EDM por proceso de torneado." Proceedings MESIC 2009 III Manufacturing Engineering Society Internacional Conference (2009): -. Blanch, R.; Pellicer, N.; Garcia-Romeu M.L.; Ciurana J. "Designing a decision support tool to aid process planning in machining processes for small and medium enterprises." Proceedings DET 2008 5th Internationa (2008): -. Pérez, A.; Garcia-Romeu, M.L.; Blanch, R.; Ciurana, J. "Diseño e implementación de una herramienta web de casos reales para el autoaprendizaje." Proceedings XVI Congreso universitario de innovación educativa de las enseñanzas técnicas (2008): -. Blanch, R.; Ferrer, I.; Garcia-Romeu M.L.; Ciurana J. "An approach system to build the process chain derivation in lenses production system." Proceedings DET 2008 5th Internationa (2008): -. Ciurana, J.; Casellas, R.; Valls, J.; Juando, J. "Experiencias en el diseño y desarrollo de competencias de un programa de máster en innovación." Proceedings XVI Congreso universitario de innovación educativa de las enseñanzas técnicas (2008): -. Ciurana, J.; Rodríguez, C.A.; Martinez, E.; Santaularia, M. "Análisis del ciclo de tiempo y dimensiones de un perfil MECOF en una máquina de alta velocidad." Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference (2007): -. Garcia-Romeu M.L.; Ciurana, J.; Frigola, S.; Teixidor, D. "Selección de parámetros en la estrategia usada por un sistema CAM para obtener óptimos acabados." Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference 1 (2007): -. Ferrer, I.; Rios, J.; Ciurana, J. "Metodología para identificar y formalizar la información relevante en el diseño para fabricación." Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference 1 (2007): -. Blanch, R.; Pellicer, N.; Garcia-Romeu M.L.; Ciurana, J.; Reig, M. "Comparison between a designed computer aided process planning (CAPP) system and a computer aided manufacturing (CAM) system for small and medium enterprises (SME's)." Proceedings DET 2007 4th International conference on Digital Enterprise Technology 1 (2007): 742-750. Arias, G.; Ciurana, J.; Planta, X.; Crehuet, A. "Aplicación del Método Taguchi para el análisis del proceso de mecanizado láser de acero endurecido." Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference 1 (2007): -. Quintana, G.; Ciurana, J.; Bacre, D.; Rodriguez, C.A. "A Cost Model for Vertical High Speed Machining Centres based on the Machine Characteristics." Proceedings of the 6th international conference on High Speed Machining 1 (2007): 41-. Garcia-Romeu, M.L.; Ciurana, J.; Ferrer, I. "An experimental study on springback of aluminum and stainless sheet metals in an air bending process." Advanced Manufacturing and Processing Technology 1 (2006): 150-154. Ferrer, I.; Rios, J.; Ciurana, J. "Integration of Manufacturing Process Knowledge in Part Design Phases." Advanced Manufacturing and Processing Technology 1 (2006): 25-29. Flores, V.; Ortega, C.; Albertí, M.; Rodriguez, C.A.; Ciurana, J.; Elías, A. "Evaluation and modeling of productivity and dynamic capability performance machining centers." Proceedings of the 6th international conference on High Performance Cutting (2006): -. Albertí, M.; Ciurana, J.; Rodríguez, C.A. "Analysis of cycle time as a function of manufacturing conditions in high speed milling of aluminium alloys." Proceedings Fifht International conference on High Speed Machining 1 (2006): 455-463. Perez, R., Ciurana, J., Riba, C. "Sintesis dimensional de tolerancias en el proceso de diseño." II conferencia científica Internacional de la Universidad de Holguin 1 (2005): -. Albertí, M.; Ciurana, J.; Rodríguez, C.A. "A decision support system for machine selection." Proceedings of International conference of Decision Science Institute 1 (2005): 559-568. Rodríguez, C.A.; Ciurana, J.; Elias, A. "Industry and University cooperation to enchance manufacturing education." CIMEC (CIRP) 3rd SME International conference on Manufacturing education 1 (2005): 301-310. Garcia-Romeu, M.L.; Ciurana, J.; Albertí, M.; Sabater, M.; Planas, D.; Terradas, M. "Sistema docente interactivo para el autoaprendizaje de elementos, partes y máquinas en procesos de fabricación." Proceedings MESIC 2005 I Manufacturing Engineering Society International Congress 1 (2005): 75-. Ciurana, J.; Garcia-Romeu, M.L.; Rodríguez, C.A; Vazquez, V. "Integration of information technology for manufacturing education." IMECE 2005 ASME International Mechanical Engineering Congress 1 (2005): 133-. Ciurana, J.; Garcia-Romeu, M.L.; Ferrer, I.; Casadesús, M. "Designing an activity model for integrating process planning (CAPP) and planning and production control (PPC) in machining processes." International Conference on Manufacturing Research (ICMR). Proceedings 1 (2005): -. Garcia -Romeu, M.L.; Ciurana, J.; Barret, J. "Design and implementation of an assistant tool to select the blank for drawing sheet metal parts." International Conference on Manufacturing Research (ICMR). Proceedings 1 (2005): -. Ferrer, I.; Ríos, J.; Garcia-Romeu, M.L.; Ciurana, J. "Representación e intercambio de información entre sistemas CAX de diseño y fabricación." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 1 (2004): 413-421. Ferrer, I.; Ríos, J.; Ciurana, J.; Macià, J. "Selección de procesos de fabricación y análisis de fabricabilidad en el diseño preliminar." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 1 (2004): 173-180. Garcia-Romeu, M.L.; Albertí M.; Ciurana, J. "Desarrollo de una aplicación informática para el cálculo de tiempos y costes en procesos de arranque de viruta ." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 1 (2002): 278-282. Garcia-Romeu, M.L.; Ciurana, J.; Giménez, G.; De Castro, R. "New sequential model for aided process planing ." International Federation of Operational Research Societies 1 (2002): 17-. Giménez Leal, G.; Casadesus, M.; Ciurana, J. "Firms and environmental certification: an empirical study of Spanish firms." Proceedings of Production and Operations Management Conference 1 (2002): -. De Castro, R.; Tibau, J.; Ciurana, J. "Changes in operation strategy in pig-production: application on pig fattening phase." Proceedings of Production and Operations Management Conference 1 (2002): -. Garcia-Romeu, M.L.; Ciurana, J.; Casadesús, M. "Evolución de los sistemas asistidos para la planificación de procesos ." Congreso de Ingeniería de Proyectos 1 (2001): -. Perez, R.; Ciurana, J.; Riba, C. "Principales enfoques en el estudio de las dimensiones y tolerancias." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 3 (2000): 1833-1838. Garcia-Romeu, M.L.; Ciurana, J., "Evaluación de un sistema CAD/CAM/CNC a patir de la obtención de geometrías básicas en máquina." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 1 (2000): 439-444. Ripoll, L.; Ciurana, J.; Garcia-Romeu, M.L. "Aplicación de la acotación funcional para el rediseño provocado por avería del acoplamiento motor-reductor." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 2 (2000): 1011-1016. Ciurana, J.; Riba, C.; Garcia-Romeu, M.L. "Sistema asistido para la formación de las cadenas de la síntesis de cotas unidireccional." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 3 (2000): 1839-1844. De Castro, R.; Ciurana, J.; Gimenez Leal, G. "Description of an information system for implementing a computer aided process planning (CAPP) system considering technical and management paramenters." Production and Operation Management CD-Ref2059 (2000): -. Ciurana, J.; Casadesús, M.; Serras, F.; De Castro, R. "Design of CAPP (Computer Aided Process Planning) information system for the planning of manufacturing processes. Implementation applied to mechanical components." Robotics and Factories of the Future 1 (2000): 257-264. Garcia-Romeu, M.L.; Ciurana, J. "Descripción de variables tecnológicas implicadas en la planificación de procesos para el desarrollo de un sistema asistido." Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica 3 (2000): 2165-2170.
David Angelats Lobo; Paola Ginestra; Elisabetta Ceretti; Teresa Puig Miquel; Joaquim Ciurana "Cancer Cell Direct Bioprinting: A Focused Review." Micromachines 12 (2021): 764-. Enric Casanova-Batlle, Antonio J Guerra , Joaquim Ciurana "Continuous Based Direct Ink Write for Tubular Cardiovascular Medical Devices." Polymers 13 (2020): 77-. Polonio-Alcalá, E.+; Rabionet, M.+; Ruiz-Martínez, S.; Ciurana, J.*, Puig, T.* "Three-Dimensional Manufactured Supports for Breast Cancer Stem Cell Population Characterization." Current Drug Targets 20 (2019): 839-851.