Jose M.Guerrero; Joan A. Mayugo; Josep Costa; Albert Turon "Failure of hybrid composites under longitudinal tension: influence of dynamic effects and thermal residual stresses." Composite Structures 233 (2020): -. S. Abdel Monsef; M. Pérez-Galmés; J. Renart; A. Turon; P. Maimí "The influence of mode II test configuration on the cohesive law of bonded joints." Composite Structures 234 (2020): 111689-. S. Abdel Monsef; A. Ortega; A. Turon; P. Maimí; J. Renart "An efficient method to extract a mode I cohesive law for bonded joints using the double cantilever beam test." Composites. Part B, Engineering 178 (2019): 107424-. J. Manterola; M. Aguirre; J. Zurbitu; J. Renart; A. Turon; I. Urresti "Using acoustic emissions (AE) to monitor mode I crack growth in bonded joints." Engineering Fracture Mechanics (2019): -. J. Manterola; M. Cabello; J. Zurbitu; J. Renart; A. Turon; J. Jumel; I. Urresti "Effect of the width-to-thickness ratio on the mode I fracture toughness of flexible bonded joints." Engineering Fracture Mechanics (2019): -. Adrià Quintanas-Corominas; José Reinoso; Eva Casoni; Albert Turon; Joan Andreu Mayugo "A phase field approach to simulate intralaminar and translaminar fracture in long fiber composite materials." Composite Structures 220 (2019): 899-911. Rodrigo P Tavares; Fermin Otero; Joan Baiges; Albert Turon; Pedro P Camanho "A dynamic spring element model for the prediction of longitudinal failure of polymer composites." Computational Materials Science (2019): -. Vallmajó, O.; Cózar, I.R.; Furtado, C; Tavares, R.; Arteiro, A.; Turon, A.; Camanho, P.P. "Virtual calculation of the B-value allowables of notched composite laminates." Composite Structures 212 (2019): 11-21. A.Wagih; P.Maimí; N.Blanco; S.M.García-Rodríguez; G.Guillamet; R.P.Issac; A.Turon; J.Costa "Improving damage resistance and load capacity of thin-ply laminates using ply clustering and small mismatch angles." Composites. Part A, Applied science and manufacturing 117 (2019): 76-91. L. Carreras; J. Renart; A. Turon; J. Costa; B. L. V. Bak; E. Lindgaard; F. Martin de la Escalera; Y. Essa "A benchmark test for validating 3D simulation methods for delamination growth under quasi-static and fatigue loading." Composite Structures 210 (2019): 932-941. Jose M. Guerrero; Rodrigo P. Tavares; Fermin Otero; Joan A. Mayugo; Josep Costa; Albert Turon; Pedro P. Camanho "An analytical model to predict stress fields around broken fibres and their effect on the longitudinal failure of hybrid composites." Composite Structures 211 (2018): 564-576. Adrià Quintanas-Corominas; Pere Maimí; Eva Casoni; Albert Turon; Joan Andreu Mayugo; Gerard Guillamet; Mariano Vázquez "A 3D transversally isotropic constitutive model for advanced composites implemented in a high performance computing code." European Journal of Mechanics A-Solids 71 (2018): 278-291. Rodrigo P. Tavares; Jose M. Guerrero; Fermin Otero; Albert Turon; Joan A. Mayugo; Josep Costa; Pedro P. Camanho "Effects of local stress fields around broken fibres on the longitudinal failure of composite materials." International Journal of Solids and Structures 156-157 (2018): 294-305. I. Jaeck; L. Carreras; J. Renart; A. Turon; F. Martin de la Escalera; Y. Essa "Experimental methodology for obtaining fatigue crack growth rate curves in mixed-mode I-II by means of variable cyclic displacement tests." International Journal of Fatigue 110 (2018): 63-70. L. Carreras; B.L.V. Bak; A. Turon; J. Renart; E. Lindgaard "Point-wise evaluation of the growth driving direction for arbitrarily shaped delamination fronts using cohesive elements." European Journal of Mechanics A-Solids 72 (2018): 464-482. Jose Manuel Guerrero; Joan Andreu Mayugo; Josep Costa; Albert Turon "A 3D Progressive Failure Model for predicting pseudo-ductility in hybrid unidirectional composite materials under fibre tensile loading." Composites. Part A, Applied science and manufacturing 107 (2018): 579-591. Turon, A.; González, E.V.; Sarrado, C.; Guillamet, G.; Maimí, P. "Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness." Composite Structures 184 (2018): 506-511. J.D.Vanegas-Jaramillo, A.Turon, J.Costa, L.J.Cruz, J.A.Mayugo "Analytical model for predicting the tensile strength of unidirectional composites based on the density of fiber breaks." Composites. Part B, Engineering 141 (2017): 84-91. Rodrigo P Tavares; Fermin Otero; Albert Turon; Pedro P Camanho "Effective Simulation of the Mechanics of Longitudinal Tensile Failure of Unidirectional Polymer Composites." International Journal of Fracture (2017): -. Carreras, L.; Renart, J.; Turon, A.; Costa, J.; Essa, Y.; Martin de la Escalera, F. "An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading." International Journal of Fatigue 95 (2017): 185-193. Guillamet, G.; Turon, A.; Costa, J.; Linde, P. "A quick procedure to predict free-edge delamination in thin-ply laminates under tension." Engineering Fracture Mechanics 168 (2016): 28-39. Sarrado, C.; Leone, F.A.; Turon, A. "Finite-thickness cohesive elements for modeling thick adhesives." Engineering Fracture Mechanics 168 (2016): 105-113. Sarrado, C.; Turon, A.; Costa, J.; Renart, J. "An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws." Composites. Part A, Applied science and manufacturing 90 (2016): 234-242. Soto, A.; González, E.V.; Maimí, P.; Turon, A.; Sainz de Aja, J.R.; de la Escalera, F.M. "Cohesive zone length of orthotropic materials undergoing delamination." Engineering Fracture Mechanics 159 (2016): 174-188. Brian L.V. Bak; Albert Turon; Esben Lindgaard; Erik Lund "A simulation method for high-cycle fatigue-driven delamination using a cohesive zone model." International Journal for Numerical Methods in Engineering 106 (2016): 163-191. Sarrado, C.; Turon, A.; Costa, J.; Renart, J. "On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints." International Journal of Solids and Structures 81 (2016): 110-116. Baena, M.; Torres, L.; Turon, A.; Llorens, M.; Barris, C "Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars." Construction and Building Materials 106 (2016): 449-460. Rodrigo P Tavares; António R Melro; Miguel A Bessa; Albert Turon; Wing K Liu; Pedro P Camanho "Mechanics of Hybrid Polymer Composites: Analytical and Computational study." Computational Mechanics (2016): -. Cabello Ulloa, Mario; Zurbitu Gonzalez, Javier; Renart Canalia, Jordi; Turon Blasco, Albert; Martínez, Félix "A General analytical model based on elastic foundation beam theory for adhesively bonded DCB joints either with flexible or rigid adhesives." International Journal of Solids and Structures 94-95 (2016): 21-34. L. Zubillaga; A. Turon; J. Renart; J. Costa; P. Linde "An experimental study on matrix crack induced delamination in composite laminates." Composite Structures 127 (2015): 10-17. Sarrado Molina, Carlos; Turon Travesa, Albert; Renart Canalias, Jordi; Costa i Balanzat, Josep "An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach." Composites Science and Technology 117 (2015): 85-91. C. Miàs, L. Torres, M. Guadagnini, A. Turon "Short and long-term cracking behaviour of GFRP reinforced concrete beams." Composites. Part B, Engineering 77 (2015): 223-231. Cabello, M.; Zurbitu, J.; Renart, J.; Turon, A.; Martínez, F. "A Non-linear hyperelastic foundation beam theory model for double cantilever beam tests with thick flexible adhesive." International Journal of Solids and Structures 80 (2015): 19-27. Brian L. V. Bak, Carlos Sarrado, Albert Turon and Josep Costa "Delamination Under Fatigue Loads in Composite Laminates: A Review on the Observed Phenomenology and Computational Methods." Applied Mechanics Reviews 66 (2014): 060803-. G. Guillamet; A. Turon; J. Costa; J. Renart; P. Linde; J.A. Mayugo "Damage occurrence at edges of Non-crimp-fabric thin-ply laminates under off-axis uniaxial loading." Composites Science and Technology 98 (2014): 44-50. L. Zubillaga; N. Carrere; A. Turon; G. Guillamet; P. Linde "Experimental and numerical analysis of free-edge delamination by means of a two-fold criterion and a cohesive zone model." Composites. Part A, Applied science and manufacturing (2014): -. L. Zubillaga; A. Turon; P. Maimí; J. Costa; S. Mahdi; P. Linde "An enenrgy based failure criterion for matrix crack induced delamination in laminated composite structures.." Composite Structures 112 (2014): 339-344. Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Turon, A.; Costa, J. "Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior." Composites. Part B, Engineering 56 (2014): 660-669. Miàs, C.; Torres, Ll.; Turon, A.; Sharaky,I.A. "Effect of Material Properties on Long-term Deflections of GFRP Reinforced Concrete Beams." Construction and Building Materials 41 (2013): 99-108. Miàs Oller, C; Torres, L.; Turon, A.; Barris Peña, C. "Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams." Composite Structures 96 (2013): 279-285. Baena, M.; Torres, Ll.; Turon, A.; Miàs, C. "Analysis of cracking behaviour of tension stiffening in FRP reinforced concrete tensile elements." Composites. Part B, Engineering 45 (2013): 1360-1367. Sarrado, C.; Turon, A.; Renart, J.; Urresti, I. "Assessment of energy dissipation during mixed-mode delamination growth using cohesive zone models." Composites. Part A, Applied science and manufacturing (2012): 2128-2136. Camanho, P.P; Arteiro, A.; Turon, A.; Costa, J.; Guillamet, G.; González, E.V. "Structural integrity of thin-ply laminates." JEC Composites Magazine 49 (2012): 91-92. Torres, Ll.; Miàs, C.; Turon, A.; Baena, M. "A rational method to predict long-term deflections of FRP reinforced concrete members." Engineering Structures 40 (2012): 230-239. González, Emilio V.; Maimí, P.; Camanho, P.P.; Turon, A.; Mayugo, J.A. "Simulation of drop-weight impact and compression after impact tests on composite laminates." Composite Structures 94 (2012): 3364-3378. Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C. "Erratum to ' Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members' [Compos Struct 93 (2011) 2511-2520]." Composite Structures 94 (2011): 312-312. Maimí, P.; Turon, A.; Trias, D. "Crack propagation in quasi-brittle two-dimensional isotropic lattices." Engineering Fracture Mechanics 78 (2011): 60-70. Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination." Mechanics of Materials 43 (2011): 169-185. Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A. "Matrix cracking and delamination in laminated composites. Part II: Evolution of crack density and delamination." Mechanics of Materials 43 (2011): 194-211. Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C. "Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members." Composite Structures 93 (2011): 2511-2520. Torres, Ll.; Miàs Oller, C.; Barris Peña, C.; Baena Muñoz, M. "Flechas diferidas en vigas de hormigón con barras de materiales compuestos." Cemento Hormigón 81 (2010): 36-41. Miàs Oller, C.; Torres, Ll.; Turon, A.; Baena Muñoz, M.; Barris Peña, C. "A Simplified method to obtain time-dependent curvatures and deflections of concrete members reinforced with FRP bars." Composite Structures 92 (2010): 1833-1838. Turon, A.; Camanho, P.P.; Costa, J.; Renart, J. "Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness." Composite Structures 92 (2010): 1857-1864. Gonzalez, Emilio V.; Maimí, P.; Turon, A.; Camanho, P.P.; Renart, J. "Simulation of delamination by means of cohesive elements using an explicit finite element code." Cmc-Computers Materials & Continua 9 (2009): 51-92. Barris Peña, C.; Torres, Ll.; Turon, A.; Baena Muñoz, M.; Catalan, A. "An experimental study of the flexural behaviour of GFRP RC beams and comparison with prediction models." Composite Structures 91 (2009): 286-295. Baena Muñoz, M.; Torres, Ll.; Turon, A.; Barris Peña, C. "Experimental study of bond behaviour between concrete and FRP bars using a pull-out test." Composites. Part B, Engineering 40 (2009): 784-797. Dávila, C.G.; Camanho, P.P.; Turon, A. "Effective simulation of delamination in aeronautical structures using shells and cohesive elements." Journal of Aircraft 45 (2008): 663-672. Baena Muñoz, M.; Torres, Ll.; Turon, A.; Barris Peña, C. "Estudio de la adherencia entre armaduras de materiales compuestos de matríz polimérica (FRP) y hormigón." Hormigón y Acero 59 (2008): 67-75. Turon, A.; Dávila, C.G.; Camanho, P.P.; Costa, J. "An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models." Engineering Fracture Mechanics 74 (2007): 1665-1682. Davila, C.G.; Camanho, P.P.; Turon, A. "Cohesive elements for shells." NASA/TM 214869 (2007): 1-22. Turon, A.; Costa, J.; Camanho, P.P.; Dávila, C.G. "Simulation of delamination in composites under high-cycle fatigue loading." Composites. Part A, Applied science and manufacturing 38 (2006): 2270-2282. Trias, D.; Costa, J.; Turon, A.; Hurtado, J.E. "Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers." Acta Materialia 54 (2006): 3471-3484. Blanco, N.; Turon, A.; Costa, J. "An exact solution for the determination of the mode mixture in the mixed-mode bending delamination test.." Composites Science and Technology 66 (2006): 1256-1258. Turon, A.; Camanho, P.P.; Costa, J.; Dávila, C.G. "A damage model for the simulation of delamination in advanced composites under variable-mode loading." Mechanics of Materials 38 (2006): 1072-1089. Turon, A.; Costa, J.; Camanho, P.P.; Davila, C.G. "Simulation of delamination propagation in composites under high-cycle fatigue by means of cohesive-zone models." NASA/TM 214532 (2006): 1-28. Turon, A.; Davila, C.G.; Camanho, P.P.; Costa, J. "An engineering solution for using coarse meshes in the simulation of delamination with cohesive zone models." NASA/TM 213547 (2005): 1-21. Turon, A.; Costa, J.; Maimí, P.; Trias, D.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation." Composites Science and Technology 65 (2005): 2039-2048. Costa, J.; Turon, A.; Trias, D.; Blanco, N.; Mayugo, J.A. "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue." Composites Science and Technology 65 (2005): 2269-2275. Turon, A.; Camanho, P.P.; Costa, J.; Davila, C.G. "An interface damage model for the simulation of delamination under variable-mode ratio in composite materials." NASA/TM (2004): 1-32.
M. Cabello; A. Turon; J. Zurbitu; J. Renart; C. Sarrado; F. Martínez "Progressive failure analysis of DCB bonded joints using a new elastic foundation coupled with a cohesive damage model." International Journal of Plasticity (2016): -.