Anar al contingut (clic a Intro)
UdG Home UdG Home
Tancar
Menú

Dr.  Carrasco Alonso, Félix Ángel

Plana personal

Categoria
CATEDRÀTIC D'UNIVERSITAT
Departament
ENGINYERIA QUÍMICA, AGRÀRIA I TECNOLOGIA AGROALIMENTÀRIA
Àrea de coneixement
ENGINYERIA QUÍMICA
Grup de recerca
Grup de Recerca Laboratori de Materials Sostenibles i Disseny del Producte
ORCID PRC:
0000-0001-9477-2703

Conferència invitada

Congrés:
XIV Reunión del Grupo Especializado de Polímeros (GEP 2016). Burgos (ESP) 2016.
Títol:
Procesamiento del poli(ácido láctico) (PLA): Modificaciones estructurales y morfológicas
Autors:
M.Ll. Maspoch, O.O. Santana, J. Cailloux, M. Sánchez-Soto, J.J. Bou, F. Carrasco
Congrés:
II Conferencia Internacional sobre Gestión de Residuos (CIMAT). Santiago de Compostela (ESP) 1998.
Títol:
Impacto medioambiental de la utilización de neumáticos usados como combustible. Experiencia industrial en una fábrica de cemento
Autors:
Carrasco, F.; Bredin, N.; Heitz, M.

Ponència

Congrés:
XV Reunión del Grupo Especializado de Polímeros (GEP 2018) (24-27 sept. 2018). Punta Umbría (Huelva) (ESP) 2018.
Títol:
Kinetics of the thermal degradation of PLA and ABS blends
Autors:
F. Carrasco, M. Sánchez-Soto, O.O. Santana, J. Cailloux, M. Ll. Maspoch
Congrés:
XV Reunión del Grupo Especializado de Polímeros (GEP 2018) (24-27 sept. 2018). Punta Umbría (Huelva) (ESP) 2018.
Títol:
Tailoring PLA/PA bioblends for 3D printing applications via the manufacturing of in situ microfibrillar composite filaments
Autors:
J. Cailloux, O.O. Santana, M. Sánchez-Soto, F. Carrasco, M. Ll. Maspoch
Congrés:
XV Reunión del Grupo Especializado de Polímeros (GEP 2018). Punta Umbría (Huelva) (ESP) 2018.
Títol:
Tailoring PLA/PA bioblends for 3D printing applications via the manufacturing of in situ microfibrillar composite filaments
Autors:
J. Cailloux; O.O. Santana; M. Sánchez-Soto; F. Carrasco; M. Ll. Maspoch
Congrés:
2nd International Conference on Composite Material, Polymer Science and Engineering (CMPSE2018). Osaka (JPN) 2018.
Títol:
Kinetics of the thermal degradation of PLA/ABS blends. Effect of adding ABS-g-MAH compatibilizer
Autors:
F. Carrasco; M. Sánchez-Soto; O.O. Santana; J. Cailloux; M.Ll. Maspoch
Congrés:
34º Encuentro del Grupo Español de Fractura (GEF-2017). Santander (ESP) 2017.
Títol:
Bioblends REX-PLA: Comportamiento a fractura de láminas extruidas
Autors:
O.O. Santana; J. Cailloux; M. Sánchez-Soto; F. Carrasco; M.Ll. Maspoch
Congrés:
Eurofillers Polymer Blends. Hersonissos, Heraklion (Creta) (GRC) 2017.
Títol:
REX-PLA bioblends: Morphology and fracture behavior of extruded sheets
Autors:
O.O. Santana, J. Cailloux, M. Sánchez-Soto, F. Carrasco, M.Ll. Maspoch
Congrés:
Eurofillers Polymer Blends. Hersonissos, Heraklion (Creta) (GRC) 2017.
Títol:
Toughening of PLA/bio-PA1010 blends by tailoring morphology with a multi-functional epoxide through reactive melt blending
Autors:
J. Cailloux; O.O. Santana; M. Sánchez-Soto; F. Carrasco; M.Ll. Maspoch
Congrés:
13º Congreso Interamericano de Computación Aplicada a la Industria de Procesos (CAIP-2017). Ciudad de México (MEX) 2017.
Títol:
Resistencia térmica del ácido poliláctico obtenido por extrusión reactiva: Efecto de la adición de nanoarcillas
Autors:
F. Carrasco; O.O. Santana; J. Cailloux; M. Sánchez-Soto; J.J. Bou; M.Ll. Maspoch
Congrés:
13th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2014.
Títol:
Kinetics of the thermal degradation of poly(lactic acid) / montmorillonite nanocomposites driven by random scission
Autors:
Carrasco, F.; Pérez-Maqueda, L.A.; Sánchez-Jiménez, P.E.; Santana, O.O.; Maspoch, M.Ll.
Congrés:
16th European Conference on Composite Materials (ECCM). Sevilla (ESP) 2014.
Títol:
Sheets of poly(lactide)/o-montmorillonite prepared by one-step reactive extrusion-calendering process
Autors:
Cailloux, J.; Hakim, R.N.; Santana, O.O.; Sánchez-Soto, M.; Franco-Urquiza, E.; Carrasco, F.; Maspoch, M.Ll.
Congrés:
GEF 2012. Mondragón (ESP) 2012.
Títol:
Essential work of fracture of poly(lactic acid) modified by reactive extrusion
Autors:
Santana, O.O.; Cailloux, J.; Franco-Urquiza, E.; Maspoch, M.Ll.; Illescas, S.; Bou, J.J.; Carrasco, F.
Congrés:
I Congreso de Innovación Docente en Ingeniería Química. Granada (ESP) 2012.
Títol:
Adecuación de la docencia mediante la satisfacción del alumnado en Ingeniería Química
Autors:
Carrasco, F.; Rosado, M.J.; García-Armada, M.P.
Congrés:
IX Congreso Nacional de Materiales Compuestos (MATCOMP'11). Girona (ESP) 2011.
Títol:
Compuestos de PLA/o-MMT: Caracterización morfológica y mecánica
Autors:
Velázquez-Infante, J.C.; Franco-Urquiza, E.; Santana, O.O.; Martínez, A.B.; Maspoch, M.Ll.; Gámez-Pérez, J.; Carrasco, F.
Congrés:
12th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2011.
Títol:
Melt processing of PLA and PLA/nanoclay materials: Changes in chemical, mechanical and thermal properties
Autors:
Carrasco, F.; Santana, O.O.; Gámez-Pérez, J.; Maspoch, M.Ll.
Congrés:
European Polymer Congress (EPC'2011). Granada (ESP) 2011.
Títol:
Chain architecture modifications of poly(lactic acid) bt reactive extrusion
Autors:
Santana, O.O.; Callioux, J.; Franco-Urquiza, E.; Bou, J.J.; Carrasco, F.; Gámez-Pérez, J.; Maspoch, M.L.
Congrés:
10º Congreso Interamericano de Computación Aplicada a la Industria de Procesos (CAIP'2011). Girona (ESP) 2011.
Títol:
Crystallinity, mechanical properties and thermal stability of poly(lactic acid) processed in pilot plant
Autors:
Carrasco, F.; Pagès, P.; Santana, O.O.; Gámez-Pérez, J.; Maspoch, M.L.
Congrés:
EUROTECH 2011. Barcelona (ESP) 2011.
Títol:
Reactive extrusion of poly(lactic acid) with styrene-acrylic glycicil methacrylate
Autors:
Santana, O.O.; Cailloux, J.; Franco-Urquiza, E.; Bou, J.; Carrasco, F.; Gámez-Pérez, J.; Maspoch, M.Ll.
Congrés:
VII Congreso Nacional de Materiales Compuestos (COMATCOMP'09). San Sebastián (ESP) 2009.
Títol:
Nanocompuestos epoxi/CNT: Estudios sobre su preparación y curado de la matriz
Autors:
Lacorte, M.T.; Pagès, P.; Comes, C.; Carrasco, F.
Congrés:
8th World Congress of Chemical Engineering Symposium New Materials and Processes (Nanotechnology). Montreal (CAN) 2009.
Títol:
Cure and thermal stability of epoxy nanocomposites
Autors:
Carrasco, F.; Pagès, P.; Lacorte, M.T.; Maspoch, M.L.,
Congrés:
XI Reunión del Grupo Español de Plásticos (GEP). Valladolid (ESP) 2009.
Títol:
Estudio cinético de la degradación térmica del ácido poliláctico (PLA) tras su procesado industrial y reciclado
Autors:
Carrasco, F.; Pagès, P.; Maspoch, M.L.
Congrés:
X Reunión del Grupo Especializado de Polímeros (RSEQ y RSEF). Avances en Materiales Poliméricos. Sevilla (ESP) 2007.
Títol:
Study of curing of layered silicate/trifunctional epoxy nanocomposites by means of FTIR spectroscopy
Autors:
Pagès, P.; Lacorte, T.; Lipinska, M.; Carrasco, F.
Congrés:
4th Reserach Conference of the European School of Materials Science and Engineering. Barcelona (ESP) 2007.
Títol:
The analysis of MMT dispersion and FTIR study of cure for a trifunctional epoxy layered silicate nanocomposites
Autors:
Pagès, P.; Lacorte, T.; Hutchinson, J.M.; Lipinska, M.; Carrasco, F.; Montserrat, S.; Román, F.
Congrés:
VII Congresso INCA (Consorzio Interuniversitario Nazionale 'La Chimica per l'Ambiente): 'Chimica sostenibile e tecnologie ambientali: stato dell'arte . Bologna (ITA) 2006.
Títol:
Biodegradable polymers production from organic wastes through sequential anaerobic/aerobic biotechnological processes
Autors:
Beccari, M.; Carucci, G.; Dionisi, D.; Petrangeli Papini, M.; Majone, M.; Carrasco, F.
Congrés:
V Congreso Internacional de la ANQUE. Puerto de la Cruz (ESP) 1998.
Títol:
Study of the deinking process of quality wastepapers
Autors:
Carrasco, F.
Congrés:
V Congreso Internacional de la ANQUE. Puerto de la Cruz (ESP) 1998.
Títol:
Study of the environmental impact of the use of scrap tires as a fuel substitute in a cement kiln
Autors:
Carrasco, F.; Bredin, N.; Heitz, M.
Congrés:
I Conferencia Internacional sobre Materiales Compuestos en Arquitectura y Construcción (ARQUIMACOM’96). Sevilla (ESP) 1996.
Títol:
Reutilización de virutas de madera como carga para la fabricación de un compuesto de matriz polimérica
Autors:
Saurina, J.; Arnau, J.; Carrasco, F.; Blavia, J.; Pagés, P.; Melchor, V.; Berlanga, R.
Congrés:
I Congreso de Química y Medio Ambiente. Barcelona (ESP) 1995.
Títol:
Tratamiento de residuos procedentes de una planta de destintado de papel
Autors:
Mutjé, P.; Carrasco, F.; Pelach, M.A.
Congrés:
2nd International Nonwood Fibre Pulping and Papermaking Conference (China Technical Association of the Paper Industry). Shanghai (CHN) 1992.
Títol:
High yield pulp from bamboo by steam explosion process. A preliminary investigation on yield and paper properties
Autors:
Ray, A.K.; Garceau, J.J.; Kokta, B.V.; Carrasco, F.
Congrés:
TAPPI Pulping Conference. Orlando (USA) 1991.
Títol:
Ultra-high-yield pulping: Relation beteween pulp properties and fibre characteristics by multiple linear regression
Autors:
Carrasco, F.; Kokta, B.V.; Ahmed, A.; Garceau, J.J.
Congrés:
TAPPI Pulping Conference. Orlando (USA) 1991.
Títol:
Kinetics of sulfonation and formation of carboxylic groups during high temperature - short time cooking vapor phase. Cooking of sulfite pretreated aspen
Autors:
Ahmed, A.; Kokta, B.V.; Carrasco, F.
Congrés:
4th Chemical Congress of North America. New York (USA) 1991.
Títol:
Ultra-high-yield pulping: Influence of sulfonation on pulp properties
Autors:
Carrasco, F.; Kokta, B.V.; Ahmed, A.; Garceau, J.J.
Congrés:
41st Canadian Chemical Engineering Conference. Vancouver (CAN) 1991.
Títol:
Review of explosion pulping: Influence of operating conditions on pulp properties
Autors:
Carrasco, F.; Kokta, B.V.; Ahmed, A.; Garceau, J.J.

Pòster

Congrés:
Iberoamerican Congress on Pulp and Paper Research (CIADICYP 2022) (28 jun.-1 jul. 2022). Girona (ESP) 2022.
Títol:
Thermal stability of poly(lactic acid) and polyamide bioblends
Autors:
F. Carrasco, O. Santana Pérez, N. León-Albiter, T. Abt, M.Ll. Maspoch
Congrés:
X Congreso Internacional de Docencia Universitaria e Innovación (CIDUI). Girona (ESP) 2018.
Títol:
Herramienta virtual para el aprendizaje no presencial de procesos termodinámicos
Autors:
J.A. Méndez; F. Carraso
Congrés:
12th European Symposium on Thermal Analysis and Calorimetry (ESTAC12) (28-30 agosto 2018). Brasov (ROM) 2018.
Títol:
Kinetics of the thermal degradation of PLA/ABS blends. Effect of adding ABS-g-MAH compatibilizer on the thermal stability
Autors:
F. Carrasco; M. Sánchez-Soto; O.O. Santana; J. Cailloux; M.Ll. Maspoch
Congrés:
X Congreso Internacional de Docencia Universitaria e Innovación (CIDUI). Girona (ESP) 2018.
Títol:
Simulador de cálculo de eficiencia de un ciclo termodinámico de potencia regenerativo
Autors:
J.A. Méndez; F. Carraso
Congrés:
XV Reunión del Grupo Especializado de Polímeros (GEP 2018). Punta Umbría (Huelva) (ESP) 2018.
Títol:
Kinetics of the thermal degradation of PLA and ABS blends
Autors:
F. Carrasco; M. Sánchez-Soto; O.O. Santana; J. Cailloux; M. Ll. Maspoch
Congrés:
XIV Reunión del Grupo Especializado de Polímeros (GEP 2016). Burgos (ESP) 2016.
Títol:
Ensayos de biodegradabilidad de mezclas REX-PLA con ABS
Autors:
J.J. Bou, J.W. Huancahuire, O. Gómez, M. Callau, O.O. Santana, J. Cailloux, M. Sánchez-Soto, F. Carrasco, M.Ll. Maspoch
Congrés:
5th International Conference on Biobased and Biodegradable Polymers (BIOPOL 2015). San Sebastián (ESP) 2015.
Títol:
Reactive extrusion: A useful process to improve the thermal stability of poly(lactic acid
Autors:
F. Carrasco, O.O. Santana, M.A. Sánchez-Soto, J. Cailloux, J.J. Bou, M.Ll. Maspoch
Congrés:
7th European Meeting on Chemical Industry and Environment (EMChIE 2015). Tarragona (ESP) 2015.
Títol:
Study of biodegradation of PLA and chemically-extended-PLA by BOD analysis and compostability
Autors:
M. Masó, P. Moré-Ollé, F. Carrasco, O.O. Santana, M.L. Maspoch, J.J. Bou
Congrés:
13th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2014.
Títol:
Application of recovery stress analysis on poly(lactic acid) modified by reactive extrusion
Autors:
Cailloux, J.; García, A.; Carrasco, F.; Santana, O.O.; Maspoch, M.Ll.
Congrés:
12th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2011.
Títol:
Calibración del modelo de fangos activados (ASM1) aplicado a una EDAR con proceso de nitrificación/desnitrificación
Autors:
Pellicer, N.; Poch, M.; Corominas, Ll.; Carrasco, F.
Congrés:
6th International ECNP Conference on Nanostructured Polymers and Nanocomposites. Madrid (ESP) 2010.
Títol:
Kinetics of the thermal decomposition of resin-CNT nanocomposites
Autors:
Carrasco, F.; Pagès, P.; Maspoch, M.L.
Congrés:
IWA Conference on Sustainable Solutions for Small Water and Wastewater Systems (S2Small 2010). Girona (ESP) 2010.
Títol:
Improving nutrient removal and energy savings through modelling and the use of fuzzy control systems in the WWTP at La Vall del Ges (Spain)
Autors:
Pellicer Johera, N.; Subiranas, J.; Poch, M.; Carrasco, F.
Congrés:
8th World Congress of Chemical Engineering Symposium New Materials and Processes (Nanotechnology). Montreal (CAN) 2009.
Títol:
Industrial processing of poly(lactic acid): Chemical, mechanical and thermal properties
Autors:
Carrasco, F.; Pagès, P.; Maspoch, M.L.
Congrés:
XI Reunión del Grupo Español de Plásticos (GEP). Valladolid (ESP) 2009.
Títol:
Cambios provocados en la cristalinidad del ácido poliláctico (PLA) durante su procesado industrial
Autors:
Pagès, P.; Carrasco, F.; Lacorte, M.T.; Maspoch, M.L.
Congrés:
11th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2008.
Títol:
Cure kinetics of silicate-epoxy nanocomposites
Autors:
Pagès, P.; Lacorte, T.; Carrasco, F.
Congrés:
11th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2008.
Títol:
Influence of nanoclay content on the thermal stability of epoxy nanocomposites
Autors:
Carrasco, F.; Lacorte, T.; Pagès, P.
Congrés:
11th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2008.
Títol:
Modelling as a tool for integrated management in urban wastewater systems
Autors:
Pellicer, N.; Carrasco, F.; Freixó, A.; Poch, M.
Congrés:
X Congreso Nacional de Materiales 2008. San Sebastián (ESP) 2008.
Títol:
Seguimiento del curado de nanocomposites de montmorilonita-epoxi trifuncional mediante FTIR y FTNIR
Autors:
Pagès, P.; Lipinska, M.; Lacorte, T.; Carrasco, F.
Congrés:
XI Simposio Latinoamericano y IX Congreso Iberoamericano de Polímeros (SLAP 2008). Lima (PER) 2008.
Títol:
Thermal stability of silicate-epoxy nanocomposites
Autors:
Carrasco, F.; Lacorte, T.; Pagès, P.
Congrés:
11th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2008.
Títol:
Ahorro energético en el tratamiento de aguas residuales por control fuzzy: Aplicación a la EDAR de la Vall del Ges
Autors:
Pellicer, N.; Denamur, J.; Poch, M.; Carrasco, F.; Castellnou, R.
Congrés:
10th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2005.
Títol:
Study of curing of a trifunctional amino-epoxy resin by FTIR and DSC
Autors:
Carrasco, F. ; Pagés, P. ; Lacorte, T. ; Briceño, K.
Congrés:
10th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2005.
Títol:
Upgrading of green algae Ulva for the manufacture of biotires
Autors:
Carrasco, F. ; Pagés, P. ; Lacorte, T.
Congrés:
10th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2005.
Títol:
Particle size distribution in thoughened resins
Autors:
Cañavate, J. ; Carrasco, F. ; Pagés, P. ; Colom, X.
Congrés:
10th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2005.
Títol:
Thermal stability of polyhydroxyalkanoates
Autors:
Carrasco, F. ; Dionisi, D. ; Martinelli, A. ; Majone, M.
Congrés:
10th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2005.
Títol:
Upgrading of food industry wastes by means of anaerobic codigestion
Autors:
Carucci, G. ; Carrasco, F. ; Trifoni, K. ; Majone, M. ; Beccari, M.
Congrés:
10th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 2005.
Títol:
Kinetics of the thermal decomposition of green alga Ulva
Autors:
Carrasco, F. ; Pagés, P.
Congrés:
9th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 2002.
Títol:
Thermal and morphological characterization of several cellulose fibres
Autors:
Saurina, J.; Suñol, J.J.; Colom, X.; Carrillo, F.; Carrasco, F.
Congrés:
9th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 2002.
Títol:
Estudio de la distribución de tamaños de la fase dispersa en materiales de tenacidad mejorada mediante técnicas de análisis de imagen
Autors:
Cañavate, J.; Colom, X.; Pagés, P.; Carrasco, F.
Congrés:
9th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 2002.
Títol:
Interfacial morphology of thermoplastics reinforced with wood fibres
Autors:
Colom, X.; Carrasco, F.; Pagès, P.; Cañavate, J.; Carrillo, F.
Congrés:
6th International Workshop on Non Crystalline Solids. Bilbao (ESP) 2000.
Títol:
Characterization of PMMA artificial ageing
Autors:
Colom, X.; García, T.; Suñol, J.J.; Saurina, J.; Carrasco, F.
Congrés:
8th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 1999.
Títol:
Study of partial miscibility in polymer composites PS/SBS
Autors:
Cañavate, J.; Pagés, P.; Saurina, J.; Colom, X.; Carrasco, F.
Congrés:
8th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 1999.
Títol:
Evaluation of the changes of crystallinity of the matrix in HDPE/cellulosic fibres composites
Autors:
Colom, X.; Pagés, P.; Carrasco, F.; Saurina, J.
Congrés:
XXVI Reunión Bienal de la Real Sociedad Española de Química. Cádiz (ESP) 1997.
Títol:
Cinética de la adsorción de polietileniminas en celulosas blanqueadas
Autors:
Mutjé, P.; Carrasco, F.; Pèlach, M.A.; Gou, M.
Congrés:
XXVI Reunión Bienal de la Real Sociedad Española de Química. Cádiz (ESP) 1997.
Títol:
Importancia de la desintegración en el proceso de destintado de papel
Autors:
Carrasco, F.; Mutjé, P.; Pèlach, M.A.; Vilaseca, F.
Congrés:
7th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1996.
Títol:
Influence of the sequence consistency-time during the disintegration step in a wastepaper deinking process
Autors:
Carrasco, F.; Pèlach, M.A.; Mutjé, P.
Congrés:
7th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1996.
Títol:
Optimization of the image analysis technique: Application to the deinking paper industry
Autors:
Carrasco, F.; Pèlach, M.A.; Mutjé, P.; Pagés, P.
Congrés:
I Congreso de Química y Medio Ambiente. Barcelona (ESP) 1995.
Títol:
Proceso de destintado de papel offset por flotación
Autors:
Pèlach, M.A.; Carrasco, F.; Mutjé, P.
Congrés:
XVII Reunión Bienal de la Sociedad Española de Microscopía electrónica. Campo Orgánico. Otros materiales (vidrio, cerámica, semiconductores). Oviedo (ESP) 1995.
Títol:
Estudio de los mecanismos microestructurales de degradación y envejecimiento del copolímero PP-PE
Autors:
Suñol, J.J.; Saurina, J.; Pagés, P.; Carrasco, F.

Presentació comunicació

Congrés:
XXXIII Encuentro del Grupo Español de Fractura (GEF-2016). San Sebastián (ESP) 2016.
Títol:
Fractura de bioblends PLA/ABS preparadas por moldeo por inyección
Autors:
O.O. Santana, D. Costas, J. Cailloux, M. Sánchez-Soto, F. Carrasco, M.Ll. Maspoch
Congrés:
XIV Reunión del Grupo Especializado de Polímeros (GEP 2016). Burgos (ESP) 2016.
Títol:
Láminas extruidas de bioblends REX-PLA/ABS: Relación morfología-comportamiento a fractura
Autors:
O.O. Santana, J. Cailloux, D. Costas, M. Sánchez-Soto, F. Carrasco, M.A. Sánchez-Soto, M.Ll. Maspoch
Congrés:
XI Congreso Nacional de Materiales Compuestos (MATCOMP 2015). Móstoles (Madrid) (ESP) 2015.
Títol:
Mejora de la estabilidad térmica del ácido poliláctico mediante dispersión de nanoarcillas modificadas
Autors:
F. Carrasco, J.J. Bou, O.O. Santana, M.A. Sánchez-Soto, J. Cailloux, M.Ll. Maspoch
Congrés:
5th International Conference on Biobased and Biodegradable Polymers (BIOPOL 2015). San Sebastián (ESP) 2015.
Títol:
Injection molded REX-PLA/ABS bioblends: Morphological characterization
Autors:
O.O. Santana, J. Cailloux, M. Sánchez-Soto, F. Carrasco, M.Ll. Maspoch
Congrés:
3rd European Bioremediation Conference. Chania (Creta) (GRC) 2005.
Títol:
Use of olive-mill wastewater for production of polyhydroxyalkanoates
Autors:
Majone, M. ; Beccari, M. ; Carrasco, F. ; Carucci, G. ; Dionisi, D.
Congrés:
IX Simposio Latinoamericano de Polímeros (SLAP). Valencia (ESP) 2004.
Títol:
Caracterización estructural y mecánica del material compuesto de resina epoxi trifuncional y microesferas de vidrio
Autors:
Pagés, P.; Lacorte, M.T.; Briceño, K.; Carrasco, F.
Congrés:
2004 International Textile Congress. Terrassa (ESP) 2004.
Títol:
Estudio del curado de una resina epoxi trifuncional mediante FTIR y DSC. Influencia del ciclo de curado
Autors:
Pagés, P.; Carrasco, F.; Lacorte, T.; Briceño, K.
Congrés:
World Automotive Congress (FISITA 2004). Barcelona (ESP) 2004.
Títol:
New perspectives on structural pieces for automotion: Trifunctional epoxy resin composites with filler of glass beads
Autors:
Briceño, K.; Lacorte, T.; Pagès, P.; Carrasco, F.
Congrés:
International Textile Congress - 2004.  (ESP) 2004.
Títol:
Study of the curing of a trifunctional epoxy resin by FTIR and DSC. Influence of the curing cycle
Autors:
Pagès, P.; Carrasco, F.; Lacorte, T.; Briceño, K.
Congrés:
VII Reunión del Grupo Especializado de Polímeros de las Reales Sociedades Españolas de Física y de Química. San Lorenzo de El Escorial (Madrid) (ESP) 2001.
Títol:
Estudio del rendimiento del curado de una resina epoxi tetrafuncional mediante espectroscopía FTIR
Autors:
Cañavate, J.; Pagés, P.; Carrasco, F.; Colom, X.; Pérez-Folch, J.; Lacorte, T.
Congrés:
8th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 1999.
Títol:
Effective residual ink concentration in deinked wastepaper
Autors:
Carrasco, F.
Congrés:
III Congreso Nacional de Materiales Compuestos (MATCOMP 99). Benalmádena (ESP) 1999.
Títol:
Modificación estructural en materiales compuestos HDPE/fibras lignocelulósicas debido a fenómenos de envejecimiento natural
Autors:
Colom, X.; Pagés, P.; Cañavate, F.J.; Pérez-Folch, J.; Carrasco, F.
Congrés:
V Reunión del Grupo Especializado en Plásticos (RSEQ, RSEF). Nuevas Perspectivas en Polímeros. San Sebastián (ESP) 1999.
Títol:
Caracterización morfológica de compuestos de polímero PS-SBS obtenidos mediante un proceso industrial
Autors:
Cañavate, J.; Pagés, P.; Carrasco, F.; Colom, X.; Pérez-Folch, J.
Congrés:
III Congreso Nacional de Materiales Compuestos (MATCOMP 99). Benalmádena (ESP) 1999.
Títol:
Efecto del tratamiento del refuerzo en la interfase de materiales compuestos HDPE/fibras lignocelulósicas
Autors:
Colom, X.; Pagés, P.; Carrasco, F.; Cañavate, F.J.; Pérez-Folch, J.
Congrés:
8th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 1999.
Títol:
Emission and atmospheric dispersion of pollutants from a cement kiln using scrap tires as a fuel
Autors:
Carrasco, F.; Heitz, M.
Congrés:
V Reunión del Grupo Especializado en Plásticos (RSEQ, RSEF). Nuevas Perspectivas en Polímeros. San Sebastián (ESP) 1999.
Títol:
Cambios microestructurales del componente celulósico en materiales compuestos HDPE/fibras lignocelulósicas
Autors:
Colom, X.; Pagés, P.; Carrasco, F.; Cañavate, F.J., Pérez-Folch, J.
Congrés:
III Congreso Nacional de Materiales Compuestos (MATCOMP 99). Benalmádena (ESP) 1999.
Títol:
Aplicación de las espectroscopía FTIR al estudio de mezclas binarias de poliestireno, polibutadieno y copolímeros SBS
Autors:
Cañavate, J.; Pagés, P.; Carrasco, F.; Colom, X.; Pérez-Folch, J.
Congrés:
XIII Congreso Nacional de Ingenieria Mecánica. Terrassa (ESP) 1998.
Títol:
Estudio del comportamiento mecánico del HDPE sometido a distintas condiciones de degradación y envejecimiento
Autors:
Colom, X.; Pagés, P.; Carrasco, F.; Cañavate, J.; Pérez-Folch, J.
Congrés:
8th European Conference on Composite Materials (ECCM 8). Napoli (ITA) 1998.
Títol:
Interfacial interactions in polymer matrix composites with an elastomeric phase: Application to PS/SBS
Autors:
Pagés, P.; Cañavate, J.; Carrasco, F.; Colom, X.
Congrés:
XIII Congreso Nacional de Ingenieria Mecánica. Terrassa (ESP) 1998.
Títol:
Envejecimiento artificial de polietileno de alta densidad mediante radiación U.V.
Autors:
Pagés, P.; Carrasco, F.; Pascual, S.; España, F.; Colom, X.
Congrés:
I Congreso Internacional de Materiales Poliméricos. V Reunión del GEP. Terrassa (ESP) 1997.
Títol:
Estudio de la degradación y envejecimiento del HDPE sometido a la radiación ultravioleta mediante espectroscopía FTIR
Autors:
Pagés, P.; Pascual, S.; Colom, X.; Cañavate, F.J.; Carrasco, F.
Congrés:
I Congreso Internacional de Materiales Poliméricos. Terrassa (ESP) 1997.
Títol:
Estudio del proceso de curado de una resina epoxy mediante espectroscopía FTIR
Autors:
Pagés, P.; Barrabés, M.; Colom. X.; Cañavate, F.J.; Carrasco, F.
Congrés:
III Congreso Iberoamericano de Ingeniería Mecánica (CIDIM'97). La Habana (CUB) 1997.
Títol:
Comportamiento mecánico de materiales compuestos HDPE/celulosa
Autors:
Pagés, P.; Colom, X.; Cañavate, J.; Carrasco, F.
Congrés:
VIII Congreso Latinoamericano de Celulosa y Papel (ACOTEPAC). Medellín (COL) 1996.
Títol:
Factores que influyen en la tasa de recuperación del papel
Autors:
Carrasco, F.; Pèlach, M.A.; Mutjé, P.
Congrés:
VIII Jornadas de Análisis Instrumental (JAI). Barcelona (ESP) 1996.
Títol:
Aplicación de la espectrofotometría FTIR al estudio de la miscibilidad parcial del poliestireno reforzado con partículas elastoméricas
Autors:
Carrasco, F.; Pagés, P.; Cañavate, X.
Congrés:
VIII Congreso Latinoamericano de Celulosa y Papel (ACOTEPAC). Medellín (COL) 1996.
Títol:
Estudio preliminar del destintado de papel: Influencia de las variables de proceso en la eliminación de tinta
Autors:
Pèlach, M.A.; Carrasco, F.; Mutjé, P.
Congrés:
7th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1996.
Títol:
Influence of sample weight and heating rate on thermogravimetric analysis: Application to polystyrene thermal decomposition
Autors:
Carrasco, F.; Pagés, P.
Congrés:
2nd European Meeting on Chemical Industry and Environment (EMChIE96). Alghero (ITA) 1996.
Títol:
Overview of effluent treatment from a deinking process
Autors:
Peracaula, R.; Mutjé, P.; Carrasco, F.; Pèlach, M.A.
Congrés:
VIII Congreso Latinoamericano de Celulosa y Papel (ACOTEPAC). Medellín (COL) 1996.
Títol:
Estudio de la retención de finos y cargas del papel mediante la técnica de titulación coloidal
Autors:
Mutjé, P.; Carrasco, F.; Pèlach, M.A.
Congrés:
V Congreso Nacional de Propiedades Mecánicas de Sólidos. Barcelona (ESP) 1996.
Títol:
Influencia de la proporción de fibras celulósicas en las propiedades mecánicas de materiales compuestos con matriz de polietileno de alta densidad
Autors:
Colom, X.; Pagés, P.; Carrasco, F.; Cañavate, X.
Congrés:
2nd European Meeting on Chemical Industry and Environment (EMChIE96). Alghero (ITA) 1996.
Títol:
Deinking of offset wastepaper by flotation
Autors:
Pèlach, M.A.; Carrasco, F.; Mutjé, P.
Congrés:
I Conferencia Internacional sobre Materiales Compuestos en Arquitectura y Construcción (ARQUIMACOM'96). Sevilla (ESP) 1996.
Títol:
Morfología del refuerzo en compuestos de polímero: Aplicación a una matriz termpoplástica y a una matriz termoestable
Autors:
Pagés, P.; Cañavate, J.; Carrasco, F.; Colom, X.
Congrés:
7th Mediterranean Congress of Chemical Engineering. Barcelona (ESP) 1996.
Títol:
Kinetic study of the sulfonation and carboxylation of hardwood and softwood species
Autors:
Carrasco, F.; Gou, M.; Paton, P.L.
Congrés:
7th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1996.
Títol:
Variation of microstructure and mechanical properties of HDPE due to natural aging
Autors:
Carrasco, F.; Pagés, P.; Colom, X.
Congrés:
I Congreso Nacional de Materiales Compuestos de AEMAC. Sevilla (ESP) 1995.
Títol:
Miscibilidad parcial en compuestos de polímero con una fase elastomérica: Aplicación al PS/SBS
Autors:
Pagés, P.; Carrasco, F.
Congrés:
VII Jornadas de Análisis Instrumental. Madrid (ESP) 1995.
Títol:
Evaluación de la cristalinidad del polietileno de alta densidad mediante FTIR y DSC
Autors:
Carrasco, F.; Pagés, P.; Saurina, J.; Colom, X.
Congrés:
I Congreso Nacional de Materiales Compuestos de AEMAC. Sevilla (ESP) 1995.
Títol:
Propiedades mecánicas de materiales compuestos de polietileno/celulosa sometidos a condiciones climáticas drásticas
Autors:
Carrasco, F.; Pagés, P.
Congrés:
VII Jornadas de Análisis Instrumental. Madrid (ESP) 1995.
Títol:
Determinación mediante FTIR de los cambios químicos sufridos por el polietileno de alta densidad sometido a fatiga térmica
Autors:
Pagés, P.; Carrasco, F.; Saurina, J.; Colom
Congrés:
XIII Congreso Brasileño y II Congreso Iberoamericano de Ingeniería Mecánica.  (BRA) 1995.
Títol:
Propiedades mecánicas de materiales compuestos de polietileno/celulosa sometidos a condiciones climáticas drásticas
Autors:
Pagés, P.; Carrasco, F.
Congrés:
XXV Reunión Bienal de la Real Sociedad Española de Química. Vitoria (ESP) 1994.
Títol:
Tendencias actuales de la recuperación del papel
Autors:
Carrasco, F.; Pèlach, M.A.
Congrés:
XXV Reunión Bienal de la Real Sociedad Española de Química. Vitoria (ESP) 1994.
Títol:
Análisis de regresión lineal múltiple de la reutilización del papel
Autors:
Pèlach, M.A.; Carrasco, F.
Congrés:
6th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1993.
Títol:
Microestructural changes induced by fracture and degradation of high density polyethylene followed by FTIR spectrophotometry
Autors:
Pagès, P.; Arnau, J.; Carrasco, F.; Gironès, J.
Congrés:
1st European Meeting on Chemical Industry and Environment. Girona (ESP) 1993.
Títol:
New less pollutant process for the pulp and paper industry
Autors:
Carrasco, F.; Mutjé, P.; Arnau, J.; Pagés, P.
Congrés:
VI Jornadas de Análisis Instrumental. Barcelona (ESP) 1993.
Títol:
Análisis de imágenes de espumas vinílicas
Autors:
Carrasco, F.; Pagés, P.; Arnau, J.
Congrés:
7th International Symposium on Wood and Pulping Chemistry. Beijing (CHN) 1993.
Títol:
Ultra-high-yield pulping of aspen: Effect of sodium carbonate/bicarbonate on pulp and paper properties of SEP and CMP pulps
Autors:
Kokta, B.V.; Ahmed, A.; Garceau, J.J.; Carrasco, F.
Congrés:
6th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1993.
Títol:
Production of furfural by acid hydrolysis of lignocellulosic materials
Autors:
Carrasco, F.; Pagés, P.; Arnau, J.
Congrés:
III Congreso de Ingeniería Ambiental. Bilbao (ESP) 1993.
Títol:
Procesos termoquímicos de aprovechamiento de residuos celulósicos
Autors:
Carrasco, F.; Pagés, P.; Arnau, J.; Rubio, M.
Congrés:
Simposio Iberoamericano de Polímeros, Grupo Español de Polímeros (RSEQ y RSEF). Vigo (ESP) 1992.
Títol:
Mechanical properties of thermoplastic composites (polyethylene - wood fiber)
Autors:
Carrasco, F.; Kokta, B.V.; Pagés, P.
Congrés:
Congreso Latinoamericano de Celulosa y Papel (AITIPE). Torremolinos (Málaga) (ESP) 1992.
Títol:
Nuevas tecnologías de fabricación de pastas a partir de materiales no madereros
Autors:
Carrasco, F.; Colom, J.F.; García, J.A.
Congrés:
Simposio Iberoamericano de Polímeros, Grupo Español de Polímeros (RSEQ y RSEF). Vigo (ESP) 1992.
Títol:
Distribución de tamaños de poros en estructuras celulares de PVC
Autors:
Pagés, P.; Arnau, J.; Carrasco, F.
Congrés:
XXIV Reunión Bienal de Química (RSEQ). Torremolinos (Málaga) (ESP) 1992.
Títol:
Desarrollo de una ecuación cinética general para el estudio de las reacciones de descomposición térmica
Autors:
Carrasco, F.; Arnau, J.; Pagés, P.
Congrés:
Congreso Latinoamericano de Celulosa y Papel (AITIPE). Torremolinos (Málaga) (ESP) 1992.
Títol:
Chemical and technological aspects of steam explosion pulping
Autors:
Carrasco, F.; Kokta, B.V.; Garceau, J.J.; Colom, J.F.
Congrés:
Congreso Latinoamericano de Celulosa y Papel (AITIPE). Torremolinos (Málaga) (ESP) 1992.
Títol:
Procesos de destintado del papel
Autors:
Carrasco, F.; Castro, C.; Colom, J.F.; García, J.A.; Torres, A.; Vidal, T.
Congrés:
Canadian Conference on Engineering Education. Québec (CAN) 1992.
Títol:
Une structure intégrée de formation pour l'industrie papetière
Autors:
Lavoie, P.; Garceau, J.J.; Carrasco, F.
Congrés:
Advances in Thermochemical Biomass Conversion. Interlaken (CHE) 1992.
Títol:
Effect of sodium carbonate on ultra-high-yield pulping
Autors:
Kokta, B.V.; Ahmed, A.; Garceau, J.J.; Carrasco, F.
Congrés:
60ème Congrès de l'association canadienne française pour l'avancement des sciences. Montréal (CAN) 1992.
Títol:
Prétraitement à l'alcool de tremble suivi d'un procédé de mise en pâte à haute température et court temps
Autors:
Ahmed, A.; Kokta, B.V.; Carrasco, F.
Congrés:
Advances in Thermochemical Biomass Conversion. Interlaken (CHE) 1992.
Títol:
Upgrading non-wood fibres by chemical impregnation and high pressure pulping
Autors:
Ray, A.K.; Garceau, J.J.; Kokta, B.V.; Carrasco, F.
Congrés:
60ème Congrès de l'association canadienne française pour l'avancement des sciences. Montréal (CAN) 1992.
Títol:
Analyse des pâtes et papiers par spectroscopie et microscopie
Autors:
Ben, Y.; Doucet, J.; Kokta, B.V.; Kaliaguine, S.; Carrasco, F.
Congrés:
Conférence technologique régionale estrienne, Section technique, Association canadienne des pâtes et papiers. Sherbrooke (CAN) 1992.
Títol:
Méthode d'évaluation des propriétés papetières des pâtes à très haut rendement
Autors:
Carrasco, F.
Congrés:
Conférence technologique estivale, Section technique, Association canadienne des pâtes et papiers. Pointe-au-Pic (CAN) 1992.
Títol:
Mise en pâte à très haut rendement à partir de tremble prétraité à l'alcool
Autors:
Ahmed, A.; Carrasco, F.; Kokta, B.V.
Congrés:
60ème Congrès de l'association canadienne française pour l'avancement des sciences. Montréal (CAN) 1992.
Títol:
La mise en pâte d'explosion à partir de tremble
Autors:
Tomasec, M.; Kokta, B.V.; Carrasco, F.
Congrés:
60ème Congrès de l'association canadienne française pour l'avancement des sciences. Montréal (CAN) 1992.
Títol:
Étude fondamentale du procédé de mise en pâte d'explosion
Autors:
Carrasco, F.; Ahmed, A.; Kokta, B.V.
Congrés:
Solvent Pulping Symposium, TAPPI Pulping Conference. Boston (USA) 1992.
Títol:
Steam explosion pulping of aspen pretreated with alcohol mixed with a non-sulfur chemical
Autors:
Ahmed, A.; Kokta, B.V.; Carrasco, F.
Congrés:
World Conference on Engineering Education. Portsmouth (GBR) 1992.
Títol:
An integrated formation for the pulp and paper industry
Autors:
Garceau, J.J.; Lavoie, P.; Carrasco, F.
Congrés:
XXIV Reunión Bienal de Químic (RSEQ). Torremolinos (Málaga) (ESP) 1992.
Títol:
Estudio cinético de la prehidrólisis ácida de materiales celulósicos
Autors:
Carrasco, F.; Pagés, P.; Puigjaner, L.
Congrés:
Pan-Pacific Pulp and Paper Technology Conference. Tokyo (JPN) 1992.
Títol:
Steam explosion pulping (SEP) of aspen: Effect of chemical pre-treatment in comparison with conventional CMP
Autors:
Kokta, B.V.; Ben, Y.; Doucet, J.; Carrasco, F; Garceau, J.J.
Congrés:
Pan-Pacific Pulp and Paper Technology Conference. Tokyo (JPN) 1992.
Títol:
Vapor phase cooking of aspen chips pretreated with sodium sulfite and/or non-sulfur chemicals
Autors:
Ahmed, A.; Kokta, B.V.; Carrasco, F.
Congrés:
XXIV Reunión Bienal de Química (RSEQ). Torremolinos (Málaga) (ESP) 1992.
Títol:
Estudio del cambio de cristalinidad y sistema cristalino de materiales celulósicos utilizando la espectrofotometría FTIR
Autors:
Pagés, P.; Arnau, J.; Carrasco, F.
Congrés:
2nd International Nonwood Fibre Pulping and Papermaking Conference, China Technical Association of the Paper Industry. Shanghai (CHN) 1992.
Títol:
Optimising straw based high yield pulping process
Autors:
Ray, A.K.; Carrasco, F.; Kokta, B.V.; Garceau, J.J.
Congrés:
2nd International Nonwood Fibre Pulping and Papermaking Conference, China Technical Association of the Paper Industry. Shanghai (CHN) 1992.
Títol:
Steam explosion high yield pulp from millwet bagasse. A prelude to further study
Autors:
Ray, A.K.; Kokta, B.V.; Carrasco, F.; Garceau, J.J.
Congrés:
7th European Conference on Biomass for Energy and Environment, Agriculture and Industry. Firenze (ITA) 1992.
Títol:
Prediction of paper properties of ultra-high-yield hardwood pulps
Autors:
Carrasco, F.; Ahmed, A.; Garceau, J.J.; Kokta, B.V.
Congrés:
4th Chemical Congress of North America. New York (USA) 1991.
Títol:
Kinetics of the prehydrolysis of xylan-containing materials
Autors:
Carrasco, F.; Roy, C.
Congrés:
59ème Congrès de l'association canadienne française pour l'avancement des sciences. Sherbrooke (CAN) 1991.
Títol:
Effet des conditions climatiques sur les propriétés mécaniques des composites bois-polymère
Autors:
Sean, S.; Kokta, B.V.; Raj, G.; Carrasco, F.
Congrés:
Cellulose'91. New Orleans (USA) 1991.
Títol:
Characterization of ultra-high-yield pulps: Effect of processing parameters on fibre and paper properties
Autors:
Carrasco, F.; Garceau, J.J.; Ahmed, A.; Kokta, B.V.
Congrés:
Cellulose'91. New Orleans (USA) 1991.
Títol:
Catalytic organosolv pulping of annual fibres
Autors:
Ray, A.K.; Rao, N.J.; Carrasco, F.; Garceau, J.J.
Congrés:
4th Chemical Congress of North America. New York (USA) 1991.
Títol:
Fundamentos de la producción de furfural
Autors:
Carrasco, F.
Congrés:
4th Chemical Congress of North America. New York (USA) 1991.
Títol:
The kinetics of sulfonation of sulfite-pretreated aspen treated with vapor at high temperature
Autors:
Ahmed, A.; Kokta, B.V.; Carrasco, F.
Congrés:
59ème Congrès de l'association canadienne française pour l'avancement des sciences. Sherbrooke (CAN) 1991.
Títol:
Étude cinétique des réactions de volatilisation à l'aide de la thermogravimétrie dynamique
Autors:
Désilets, M.; Mans, C.; Carrasco, F.
Congrés:
59ème Congrès de l'association canadienne française pour l'avancement des sciences. Sherbrooke (CAN) 1991.
Títol:
Analyse statistique par régression multiple des propriétés des pâtes à très haut rendement
Autors:
Parenteau, M.; Kokta, B.V.; Garceau, J.J.; Carrasco, F.
Congrés:
78th Annual Meeting, Technical Section, Canadian Pulp and Paper Association,. Montréal (CAN) 1991.
Títol:
Steam explosion pulping of spruce and aspen: Optimization of the process
Autors:
Kokta, B.V.; Ahmed, A.; Garceau, J.J.; Carrasco, F.; Zhan, D.; Huang, G.Q.
Congrés:
5th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1990.
Títol:
Eucalyptus pulping: A comparison of explosion and conventional pulping processes
Autors:
Kokta, B.V.; Ahmed, A.; Deming, Z.; Garceau, J.J.; Carrasco, F.
Congrés:
58ème Congrès de l'Association canadienne française pour l'avancement des sciences. Sainte-Foy (Québec) (CAN) 1990.
Títol:
Production de furfural dans une unité de développement de procédé: bilans de matière
Autors:
Carrasco, F.
Congrés:
5th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1990.
Títol:
Thermochemical processes for biomass conversion
Autors:
Carrasco, F.; Garceau, J.J.
Congrés:
5th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1990.
Títol:
Thermo-mechano-chemistry of wood pretreatment
Autors:
Carrasco, F.
Congrés:
57ème Congrès de l'Association canadienne française pour l'avancement des sciences. Montréal (CAN) 1989.
Títol:
L'hydrolyse des hémicelluloses
Autors:
Carrasco, F.
Congrés:
57ème Congrès de l'Association canadienne française pour l'avancement des sciences. Montréal (CAN) 1989.
Títol:
L'hydrogénation catalytique homogène du glucose
Autors:
Carrasco, F.
Congrés:
56ème Congrès de l'Association canadienne française pour l'avancement des sciences. Moncton (CAN) 1988.
Títol:
Conversion catalytique des sucres obtenus par traitement thermochimique de la biomasse: options polyols et furfural
Autors:
Carrasco, F.; Chornet, E.; Overend, R.P.
Congrés:
55ème Congrès de l'Association canadienne française pour l'avancement des sciences. Ottawa (CAN) 1987.
Títol:
L'analyse thermogravimétrique appliquée à l'évaluation des poids moléculaires du polystyrène
Autors:
Carrasco, F.; Chornet, E.; Overend, R.P.; Heitz, M.
Congrés:
55ème Congrès de l'Association canadienne française pour l'avancement des sciences. Ottawa (CAN) 1987.
Títol:
Fractionnement-solvolyse-hydrolyse d'un bois tropical dans deux unités de développement de procédé
Autors:
Heitz, M.; Chornet, E.; Overend, R.P.; Carrasco, F.
Congrés:
4th Mediterranean Congress on Chemical Engineering. Barcelona (ESP) 1987.
Títol:
Physicochemical characterization of products derived from Eucalyptus via the fractional liquefaction of biomass (the UdeS-FSH Approach)
Autors:
Carrasco, F.; Heitz, M., Brown, A.; Chornet, E.; Overend, R.P.; Costa, J.
Congrés:
54ème Congrès de l'Association canadienne française pour l'avancement des sciences. Montréal (CAN) 1986.
Títol:
Caractérisation des solides résiduels issus de la liquéfaction par fractionnement de matières lignocellulosiques par voie thermomécanochimique en phase aqueuse
Autors:
Heitz, M.; Carrasco, F.; Chornet, E., Overend, R.P.
Congrés:
54ème Congrès de l'Association canadienne française pour l'avancement des sciences. Montreal (CAN) 1986.
Títol:
Corrélations générales lors de la liquéfaction de matières lignocellulosiques en milieu aqueux
Autors:
Heitz, M.; Carrasco, F.; Rubio, M.; Chauvette, G.; Chornet, E.; Jaulin, L.; Overend, R.P.
Congrés:
54ème Congrès de l'Association canadienne française pour l'avancement des sciences. Montréal (CAN) 1986.
Títol:
Écoulement rapide d'un liquide à travers une restriction: mesure de la vitesse de passage
Autors:
Carrasco, F.; Gagné, J.; Chornet, E.; Overend, R.P.
Congrés:
53ème Congrès de l'Association canadienne française pour l'avancement des sciences. Chicoutimi (Québec) (CAN) 1985.
Títol:
Fractionnement des matières lignocellulosiques par voie thermomécanochimique: effets capillaires
Autors:
Carrasco, F.; Heitz, M.; Chornet, E.; Overend, R.P.
Congrés:
XX Reunión Bienal de la Real Sociedad Española de Química. Castelló de la Plana (ESP) 1984.
Títol:
Modelización y simulación de la combustión sumergida
Autors:
Carrasco, F.; Esplugas, S.

Escull quins tipus de galetes acceptes que el web de la Universitat de Girona pugui guardar en el teu navegador.

Les imprescindibles per facilitar la vostra connexió. No hi ha opció d'inhabilitar-les, atès que són les necessàries pel funcionament del lloc web.

Permeten recordar les vostres opcions (per exemple llengua o regió des de la qual accediu), per tal de proporcionar-vos serveis avançats.

Proporcionen informació estadística i permeten millorar els serveis. Utilitzem cookies de Google Analytics que podeu desactivar instal·lant-vos aquest plugin.

Per a oferir continguts publicitaris relacionats amb els interessos de l'usuari, bé directament, bé per mitjà de tercers (“adservers”). Cal activar-les si vols veure els vídeos de Youtube incrustats en el web de la Universitat de Girona.